Operating instructions

ManualsBrandsLogic3 Manualsaudio & home theatreTX101B

SoundStage 5.1

TX101

Summary of content (9 pages)

PAGE 1
SoundStage 5.
PAGE 2
CONTENTS Thank you for purchasing the Logic3 TX101. As with all Logic3 products the TX101 has been built to the highest manufacturing standards and testing throughout its development to ensure you get the best possible product. Please read through and familiarise yourself with this manual before you use the product. PRODUCT SPECIFICATION Page 2 ..PACK CONTENTS PRODUCT SPECIFICATION Front Panel Controls & Functions Standby: Input: LED: Volume +: Volume -: Remote: FM Radio: Page 3...
PAGE 3
SAFETY INFORMATION CAUTION: To reduce the risk of fire and electric shock, do not remove the cover of this product. Refer all maintenance requests to authorized personnel only. This lighting flash arrow symbol in a triangle alerts users to the presence of non-insulated high voltage within the product's enclosure that presents an electrical shock hazard.
PAGE 4
REMOTE CONTROL 1. STANDBY: Power Standby Button. 2. COAXIAL1/2: Coaxial Input Selection. 3. FM: FM Selection Button. 4. STEREO: Stereo or Mono FM Radio Selection. 5. MEMORY: Station Memory Button. 6. TU-CH : Preset Channel Down. 7. CENTER-: Center Volume Level Down Button 8. SW-: Subwoofer Volume Level Down Button 9. FR-: Front Right Volume Level Down Button. 10. FL-: Front Left Volume Level Down Button. 11. RR-: Rear Right Volume Level Down Button. 12. RL-: Rear Left Volume Level Down Button. 13.
PAGE 5
POWER 1. 2. 3. 4. 5. Connect the Power Cable Plug into your AC Mains Supply and switch it to the ON position. Press the POWER switch on the left side panel to switch the unit ON “-” will appear on the front LCD to indicate it is in Standby mode. Press the STANDBY button on the front panel or remote control to enter Normal mode. To switch the unit OFF press the POWER switch on the left side panel. VOLUME SELECTION 1. 2.
PAGE 6
DSP FUNCTION – Digital Sound Processing DOLBY DIGITAL Press the ‘DSP’ button on the remote control, the front LCD will display ‘H-1’. The preset equalizers are as follows: When a Dolby Digital source is detected by the SoundStage the Dolby Digital logo will appear on the bottom right side of the front panel H-1 : LIVE H-2 : HALL H-3 : THEATER H-4 : CHORUS H-5 : MATRIX (nb: DSP function is only active for the Auxiliary input and not for the Optical or Coaxial connections ) MODE FUNCTION 5.
PAGE 7
GLOSSARY DOLBY DIGITAL Dolby Digital can deliver surround sound with up to five discrete full-range channels: Left, Center, Right, Left Surround, Right Surround-plus a sixth channel for powerful low-frequency effects. As it needs only about one-tenth the bandwidth of the others, the LFE channel is referred to as a ".1" channel (and sometimes erroneously as the "subwoofer" channel).
PAGE 8
TROUBLE SHOOTING SOUND / POWER PROBLEM The SoundStage does not turn ON CAUSE The AC power supply cable is not firmly connected to the AC wall outlet. The SoundStage is not switched to the ‘ON’ position on the Side panel No sound. Incorrect input or output cable connections to the back of the SoundStage The sound is set to mute The correct input source has not been selected. The sound suddenly goes Off.
PAGE 9
RESET FUNCTION 1. Press the ‘RESET’ button on the remote control to set the SoundStage back to the factory settings. Factory Settings a. Master Volume level : ‘10dB’ b. RL / RR / CE / SW / FR / FL volume level : ‘00dB’ c. Input selection ‘ AU’ INDEX   B Back Panel…………………...…….3, 7 P Packaging Contents………………..…..2 Product Specification……………..…2, 7 Power Supply………………………..….2 Positioning the unit….............….......4, 7 Power……………………………..…..…5     A Antenna…………………………….....6 Aux…………………………….