5-IN-1 WIRELESS WEATHER STATION WITH WI-FI USER GUIDE LOWSC510WB
Thank you for purchasing the Logia™ 5-in-1 Wireless Weather Station with WI-FI. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. It is not intended for commercial use.
SAFETY PRECAUTIONS 1. Do not let children use or play with this device. It is not a toy. 2. Do not use any attachments not supplied or recommended by the manufacturer. 3. Do not place the appliance near open flames or heat sources. Fire, electric shock, product damage, or injury might occur. 4. Do not mix old and new batteries in the display unit. 5. A low battery symbol will appear in the OUT or CH sections of the LCD display when battery power is low on the console or weather sensor, respectively.
PRODUCT FEATURES 1. Wireless 5-in-1 weather sensor measures wind speed, wind direction, rainfall, temperature, and humidity. 2. No calibration needed! The product is fully pre-calibrated and mostly assembled; all you need to do is install it and sync with the included display console. 3. Provides precise weather and environmental information directly from your own backyard, instead of relying on a national weather station. 4. Color LCD display with dimmable backlight. 5.
PACKAGE CONTENTS 1 5 6 7 2 8 9 4 3 12 10 11 13 14 CHANNEL HISTORY BARO SENSOR UNIT WI-FI REFRESH RESET MAX/MIN 1. Wireless Weather Sensor (1) 6. Large Hexagonal Nuts (4) 2. Mounting Pole (1) Plastic Exterior 7. Large Washers (4) 3. Mounting Clamp (1) 9. Small Hexagonal Nuts (2) 4. Mounting Base (1) 5. Large Mounting Screws (4) 8. Small Screws (2) 10. Rubber Pads for Mounting Clamp 11. Display Console with Kickstand (1) 12. Display Console Battery (1) 13.
DISPLAY CONSOLE OVERVIEW MAIN CONSOLE OVERVIEW 1 11 12 13 14 15 16 2 BARO UNIT BARO SENSOR SENSOR REFRESHREFRESH RESET UNIT WI-FI RESET WI-FI CHANNEL CHANNEL HISTORY HISTORY MAX/MIN MAX/MIN 3 4 5 1. Kickstand 2. SNOOZE button 3. CHANNEL button 4. HISTORY button 5. MAX/MIN button 6. WIND button 7. INDEX button 8. BARO button 9. RAIN button 6 6 7 8 9 10 17 18 19 20 21 22 23 24 10. LCD Display (See overview on page7 18. 12/24 button 11. CLOCK SET button 20. BARO UNIT button 12.
LCD DISPLAY OVERVIEW LCD DISPLAY 4 1 5 2 6 7 3 Display 1. Indo hum 2. Wea 3. Time 4. Wind 5. Outd hum 6. Baro 7. Rain 8. Wea 8 WIRELESS 5-IN-1 WEATHER SENSOR 1. 2. 3. 4. 5. 6. 7. 8. 1. Rain collector 2. Balance indicator Temperature & humidity (indoor/CH) 3. Antenna Weather 4. forecast Wind cups Time, 5. date, & moon phase pole Mounting 6. Radiation shield Wind speed & direction 7. Wind vane Temperature & humidity (outdoor) 8. Mounting base Barometer 9. Mounting clamp Rainfall 10.
WIRELESS WEATHER SENSOR OVERVIEW MAIN DEVICE 1 2 4 3 6 7 5 11 12 13 8 9 1. Rain collector 8. Mounting base 2. Level 9. Mounting clamp 3. Antenna 10. Red LED indicator 4. Wind cups (anemometer) 11. RESET button 5. Mounting pole 12. Battery compartment 6. Sensor casing 13. Mounting clamp screws 7.
RAIN GAUGE 1. Rain collector 1 2 3 4 2. Tipping bucket 3. Rain sensor 4. Drain holes TEMPERATURE AND HUMIDITY SENSOR 1. Sensor shield 1 2 2. Temperature and humidity sensor WIND SENSOR 1. Wind cups (anemometer) 1 2 2.
WIRELESS WEATHER SENSOR SETUP INSTALL BATTERIES 1. Unscrew the door to the battery compartment on the underside of the main sensor unit. 2. Insert three (3) new AA alkaline batteries, making sure the polarities match up with the markings inside the compartment. LLATION door at bottom of unit and insert the o the +/- polarity indicated . oor compartment on tightly . 3. Replace the battery door, ensuring the watertight O-ring is properly aligned. This maintains the water-resistant seal.
d sensor's indicator align . 2. Insert the nut into the hexagonal hole by the sensor and hold it in place, then insert the screw through the other side. Use a screwdriver to tighten the screw. Do not insert the screw first, or the nut may not line up correctly with the designated hole. e hexagon hole the sensor, gon hole on theonsensor, w in other side and tighten it by her side and tighten it by 3.
4. Insert the nut into the hexagonal hole on the side of the stand and hold it in place, then insert the screw through the other side. Use a screwdriver to tighten the screw. he stand, and then MOUNT THE SENSOR OUTDOORS Add rubber 1. The wireless weather sensor should be mounted in an open area with no obstructions above and/ pads before or around it, so that it can accurately measure the rain and wind. Point to mount on 2.
-1 sensor with the wind meter end pointing to the North to correctly nd vane . Add rubber pads before mount on the pole Point to NORTH B MOUNTING ON A RAILING 1.5 meter off the ground Diameter 1"~1 .3") B . Mounting on the railing 5. The mounting location should be within 492 ft. (150 m) of the location where you will be keeping ) the display console with few obstructions and relatively clear sightlines.
NOTE: If nothing appears on the LCD display screen after you plug in the power adaptor, use a pin or similar small object to press the RESET button. SET THE LCD DISPLAY VIEWING ANGLE If you have the display console wall-mounted or on a table stand, the viewing angle may need adjustment. Press or buttons while the display is in normal operating mode to adjust the viewing angle. PAIRING THE WIRELESS WEATHER SENSOR WITH THE DISPLAY CONSOLE 1.
NOTE: Any time you press the RESET key underneath the wireless weather sensor, it generates a new ID code for pairing with the console, and you will need to press the SENSOR/WI-FI button on the console for the two devices to pair again. PAIRING ADDITIONAL WIRELESS SENSORS WITH THE DISPLAY CONSOLE The display console should automatically search and pair with any additional wireless hygro-thermo outdoor sensors you install.
4. Write down or screenshot your Station ID and Station Key/Password for reference and to complete the setup process.
CREATE WEATHERCLOUD ACCOUNT 1 . InCREATE https://weathercloud.net enter your information in "Join us today" section, then follow YOUR WEATHERCLOUD ACCOUNT CREATE WEATHERCLOUD the instructions to create ACCOUNT your account . 1 . In1.https://weathercloud.net enter yourat information in "Join us today" section, thenyour follow Visit the Weathercloud website https://www.weathercloud.net and enter information in CREATE WEATHERCLOUD the instructions to create ACCOUNT your account .
of p se ET y NC ic ew [S e ng on on th . S ] p EN co th o e th ] ke ap ne se o y key co aire SO nso e w e s ns ou at ns d se y . pea in R le i or a b ol up / wi rel ns r i th SY o e . l e S , l s n t down your ID and key for the further setup or o tto T step. di the YN l au ss N th . ne m sp s C to s 4 . Jot down your ID and key for the further setup e th histep. s CU e o e l e m O e a ] k a ns f d co c un P n y w .
3. Once you are connected to the display console, open up your internet or mobile web browser, and enter the following address into the address bar: http://192.168.1.1 (make sure to include the http:// or else the web browser may interpret the address as a search query). We recommend using the latest version of reputable web browsers. SET UP WEATHER SERVER CONNECTION Once you are connected via WI-FI to the display console and have opened the settings page at http://192.168.1.
recorded (if any) Select time server Server URL: Stationnist.time.gov key: ****** Mac address Function firmware version: 1.00 WiFi firmware version: 1.00 setup Time server 00:0E:C6:00:07:10 Press to complete the setting Apply Select time server Server URL: nist.time.gov page NOTES: When the WI-FI setup isSETUP complete, your computer or mobile will return to the default Pressdevice to complete the setting WI-FI connection.
ADVANCE SETTING IN WEB INTERFACE Press "ADVANCED" key at the top of web interface to enter the advance setting page, this page allow you to set and view the calibration data of the console, also you can update the Language: SETUP Select setting unit Temperature Indoor o C Humidity % Current offset: 1 Current offset: -5 Current offset: -9 Current offset: 10 CH 1 Current offset: 2 Current offset: -5 CH 2 Current offset: 3 Current offset: -2 CH 3 Current offset: 1.
VIEW YOUR WEATHER DATA IN WEATHER UNDERGROUND To view your weather station data live via PC or mobile web browser, visit http://www.wunderground. com, and then enter the Station ID you were provided during account setup in the search box. Your weather data will show up on the next page. Alternately, you can log in to your Weather Underground account to view and download the recorded data from your weather station.
air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity. Update function, however, is not available through mobile/smart devices. Two types of firmware updates are available, namely Function Firmware and System WI-FI Firmware, and are located at the bottom of ADVANCED page.
6. The console will restart once the update completes. NOTES: • You cannot update the Function Firmware and WI-FI Firmware at the same time. Updates must be installed one by one. • Make sure the power cable remains connected during the update process. • Make sure your PC’s wireless connection is stable. • Once the update process starts, do not try to do anything else on your PC or on the display console. • During the firmware update process, the console will stop uploading data temporarily.
Northern Hemisphere Icons Moon Phase Southern Hemisphere Icons New Moon Waxing Crescent Moon First Quarter Moon Waxing Gibbous Moon Full Moon Waning Gibbous Moon Third Quarter Moon Waning Crescent Moon POINTING THE WIRELESS WEATHER SENSOR TO SOUTH Arrow Icon The outdoor wireless weather sensor is calibrated to be pointed North for maximum accuracy.
First Quarter Moon Waxing Gibbous Moon SETTING THE ALARM Full Moon Waning Gibbous Moonclock, follow these instructions to set the alarm If you’d like to use your display console as an alarm time: Thirdand Quarter 1. In normal operating mode, press hold Moon the ALARM button for two (2) seconds until the alarm hour starts flashing. This indicates that you have entered the alarm time setting mode. Waning Moon 2. Use the or buttons to adjustCrescent the alarm hour.
Full Moon Waning Gibbous Moon TEMPERATURE/HUMIDITY & TRENDS Third Quarter Moon Press the °C/°F button to switch Waning betweenCrescent CelsiusMoon and Fahrenheit temperature measurements. The arrows show the trend in changes to the temperature/humidity levels. Arrow Icon NOTE: Temp/Humidity Trend Rising Steady ” icon will display on the LCD.
Third Quarter Moon Waning Crescent Moon 3. If the signal for the outdoor channel has been interrupted and does not recover within 15 minutes, the signal icon will disappear. The temperature and humidity section (outdoor) will display “—” on the corresponding channel. WIRELESS SENSOR SIGNAL RECEIVING Icon 4.Arrow If the1 . signal still does not recover within 48 hours, the “—” display will become permanent.
17 ~ 21 knot format To set the wind speed unit and direction display leaf begin to sway. 8 . 0 ~ 10 . 7 m/sfor 2 seconds to enter into wind speed unit 1. In normal mode, press and hold [ WIND ] key 39 ~ 49 km/h [ GRAPH / ]Large or [branches HISTORY / V ] key to in motion. change the wind speed unit in this sequence: → knots mph wires. 25 ~ 30 mphm/s → km/h Whistling heard in→overhead Strongagain breezeto return to normal display mode. Press6[the WIND] button Umbrella use becomes 2. 2.
Empty plastic bins tip over. 10.8 ~≥ 13 .8 m/s are hurled about. 32.7m/s 50 ~ 61 km/h ow which the water vapor in air at constant barometric Whole trees in motion. 31condensed ~ 38 mph at the sameHeat rate at which it evaporates. The range High Warning Explanation Effort needed to walk 7 Index wind 28 ~ 33 knot a solid surface. WEATHER FORECAST the wind. 80°F to 90°F (27°C to 32°C) Caution Possibility ofagainst heat exhaustion 13.9 wireless ~ 17.
e rainfall RAINFALL and rain rate The Rainfall shows information regarding the rainfall and rain rate. Set the or 2 seconds toRainfall enter Units unit setting mode. le the rainfall unitand between mmbutton and for in.two (2) seconds to enter unit setting mode. 1. Press hold the RAIN and exit 2. thePress setting. the or buttons to toggle the units of measure for rainfall between mm and in. 3. Press the RAIN button again to save and exit the setting mode.
Indoor* daily MAX temperature > indoor* daily MIN temperature > indoor* daily MAX humidity > indoor* daily MIN humidity > outdoor daily MAX temperature > outdoor daily MIN temperature > outdoor daily MAX humidity > outdoor daily MIN humidity > daily MAX average wind speed > daily MAX gust > daily MAX relative pressure > daily MIN relative pressure > daily MAX absolute pressure > daily MIN absolute pressure > daily MAX feels like temperature > daily MIN feels like temperature > daily MAX heat index > daily M
(-40°C ~ 80°C) Indoor Indoor Temperature HighHigh Alert Alert LowTemperature Indoor Temperature Alert 32°F (0°C) Indoor temperature & 40°C 40°C (current (current channel) channel) humidity High Indoor Humidity Alert 80% -40°C -40°C ~ 80°C ~ 80°C 1% ~ 99% Indoor Indoor Temperature Temperature Low Low AlertAlert 0°C 0°C Low Indoor Humidity Alert 40% (current (current channel) channel) Indoor Indoor / CH / CH Wind direction & speed Wind Speed Alert 17.2 m/s 0.
ound for 2 minutes and the related alert icon and minutes,CARE the alert icon and readings will still keep AND MAINTENANCE alert range. REPLACEMENT e weatherBATTERY readings falls into the alert range again.
SPECIFICATIONS DISPLAY CONSOLE SPECIFICATIONS DISPLAY CONSOLE General Specifications Dimensions (W x H x D) 5.4″ x 6.6″ x 1″ (117 x 189 x 31mm) Weight 0.82 lb. (370g) with batteries Power source DC 5V, 1A adaptor Backup battery CR2032, 3V battery Operating temperature range 23°F ~ 122°F (-5°C ~ 50°C) WI-FI Communication Specifications 802.11 b/g/n Wi-Fi standard 2.
Weather forecast Display modes Memory modes Alarm Sunny, Partly Cloudy, Cloudy, Rainy, Rainy / Stormy and Snowy Current Historical data of past 24 hours, daily Max / Min Pressure change alert Indoor / Outdoor Temperature Display & Function Specifications Note: The following details are listed as they are displayed or operate on the console. Temperature unit °C and °F Display range -40 ~ 176°F (-40 ~ 80°C) Indoor Accuracy Outdoor Accuracy >104°F ± 3.6°F (>40°C ± 2°C) 32°F ~ 104°F ± 1.
Display modes Current Memory modes Historical Data of past 24 hours, daily Max Rainfall display mode Hourly / Daily / Weekly / Monthly / Total rainfall Alarm High Hourly Rainfall Alert Weather Index Display & Function Specifications Note: The following details are listed as they are displayed or operate on the console. Weather index mode Beaufort, Wind Chill, Heat Index and Dew point Beaufort scale 0 ~ 12 Wind Chill range -40°F ~ 64.4°F (-40°C ~ 18°C), wind speed > 4 .8km/h Heat index range 78.
WARRANTY INFORMATION LIMITED WARRANTY ON LOGIA™ 5-IN-1 WIRELESS WEATHER STATION WITH WI-FI THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP. LIMITATION OF LIABILITY TO THE EXTENT NOT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED.
If you experience any issues with your Logia™ 5-in-1 Wireless Weather Station with WI-FI, please contact us before returning your product to the place of purchase. We’re here to help! QUESTIONS OR PROBLEMS? CONTACT US! Email: info@supportcbp.com or call: 1-833-815-0568 www.logiaweatherstation.
LOGIA is a trademark of C&A IP Holdings, LLC, in the U.S. Android is a trademark of Google LLC. Apple and App Store are trademarks of Apple Inc. in the U.S. and other countries. IOS is a trademark of Cisco in the U.S. and other countries and is used under license. Microsoft, Windows, Windows Server, Windows Vista, and Windows 10 are trademarks of Microsoft Corporation in the U.S. and/or other countries. WI-FI, WPA, and WPA2 are trademarks of WI-FI Alliance in the U.S. and/or other countries.
