Audiodesign Loewe klang 9 User U Us e handbook er
ttv
Loewe klang 9 User handbook Table of contents Table of contents ....................................................................................... 3 Welcome!.....................................................................................................4 Delivery specification ................................................................................4 Safety Instructions .................................................................................... 5 Intended Use....................
Loewe klang 9 User handbook Welcome! Delivery specification Introduction Thank you, for choosing a Loewe product! We are happy to have you as a customer. english Loewe stands for the highest standards of technology, design and ease of operation. This applies equally to TV, Blu-ray, audio and accessories. Neither technology nor design is an end in itself, but both are intended to provide our customers with the best possible audio and visual experience.
Loewe klang 9 User handbook Safety Instructions Intended Use For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety instructions below: This device has been built exclusively for private use in domestic environments. Warranty services cover this intended use. Warning: To prevent electrical shock, do not open the unit. There are no parts inside the unit that can be repaired by the user. Repairs should only be carried out by a Loewe dealer.
Loewe klang 9 User handbook Cleaning Position of the connections and operating elements Cleaning A) The housing of the Loewe klang 9 is fabric covered. Vacuum the surface regularly with a soft brush attachment. english Clean the surface of the Loewe klang 9 made of aluminium with a damp, soft and clean cloth only (without any abrasive cleaning agent). In case of dirt or stains: Moisten a soft, colour-neutral cloth with detergent or normal stain remover and gently rub away the stain.
Loewe klang 9 User handbook Connectors and operating controls Connectors and operating controls 1 english 2 3 4 7 8 9 5 6 1 SPEAKER CHANNEL - Setting/Display of the channel 6 2 SPEAKER POSITION - Setting/Display of the position in the room 7 SERVICE - Service interface for internal purposes 3 GAIN –/+ - Setting/Display of the sound intensity 8 LINE IN - Audio input (analogue) 4 PAIRING - Connection to the Loewe klang link 9 DIGITAL AUDIO LINK OUT - Audio output (digital) 5 DIGITAL AU
Loewe klang 9 User handbook Configuration examples Connection option without Loewe klang link (5.0 system) Configuration examples When configuring a 5.0 system, the Loewe klang 9 will be connected to the audio source via DIGITAL AUDIO LINK. Only one of the given examples is possible at the same time. Connection option without Loewe klang link (2.0/3.0 system) Front left When configuring a 2.0/3.0 system, the Loewe klang 9 will be connected to the audio source via DIGITAL AUDIO LINK.
Loewe klang 9 User handbook Configuration examples Connection option with Loewe klang link (3.0/5.0 system) When expanding your speaker system with the Loewe klang link box, you can also operate the system using a wireless connection. When using a wireless connection of your speaker system, it is not possible to connect additional speakers via cable. A mixed operation (wired/wireless) is not possible. Connection option with DIGITAL AUDIO LINK and LOEWE KLANG LINK (3.0/5.0 system) If you use a 3.0/5.
Loewe klang 9 User handbook Connecting Loewe klang 9 via Digital Audio Link Connecting Loewe klang 9 via Digital Audio Link Switch off the TV set before connecting the Loewe klang 9. Using the included network cable, connect the DIGITAL AUDIO LINK interface of the Loewe TV set (1 to the DIGITAL AUDIO LINK IN interface of the Loewe klang 9.
Loewe klang 9 User handbook Connecting Loewe klang 9 via LINE IN Connecting Loewe klang 9 via LINE IN Via the LINE IN analogue interface, you can connect the klang 9 to your TV set or any audio source. Disconnect all devices from the mains before connecting. Connect the analogue audio output AUDIO OUT (1 of the TV set or of another audio source with the LINE IN audio inputs LEFT/RIGHT of the speaker. To do so, use the supplied 3.5 mm jack/2 x cinch audio cable.
Loewe klang 9 User handbook Settings directly on the speaker Settings directly on the klang 9 SPEAKER CHANNEL settings Before commencing the start-up and settings, please make sure that all cables are connected correctly. Using the SPEAKER CHANNEL button, you can directly select the channel that you wish to hear via the respective speaker. Selection of FRONT L/R: LED indicator english The status appears for 10 sec. and then the LEDs will turn off.
Loewe klang 9 User handbook Settings directly on the speaker Adjusting the GAIN +/Using the GAIN +/- buttons you can adjust the basic volume. The four LED indicators -12 dB /-6 dB / 0 dB / +6dB indicate the adjusted volume. The adjustment range of -12 dB to +6 dB can be changed in steps of 1 dB. The corresponding LED will light up for the values -12 dB, -6 dB, 0 dB and +6 dB.
Loewe klang 9 User handbook Pairing with Loewe klang link Connecting the Loewe klang 9 via Loewe klang link Speaker configuration You cannot use the system in a mixed mode. You must decide between a wireless or wired connection. Your TV set detects automatically whether it is connected wirelessly or wired. english Prior to pairing, make sure that the speakers are properly connected and all possible settings (SPEAKER CHANNEL/SPEAKER POSITION) were selected correctly. HOME: Call Home view.
Loewe klang 9 User handbook Configuration of the Loewe klang 9 via DAL/WDAL TV loudspeakers as centre speaker After switching on the TV set, the sound components wizard detects that a Loewe klang Sound system was connected to DIGITAL AUDIO LINK and automatically displays it in the sound components wizard. A system 3.0 is assumed as a configuration example.
Loewe klang 9 User handbook Configuration of the Loewe klang 9 via DAL/WDAL Software update Adjust speaker level Software update Software update via DIGITAL AUDIO LINK If a new version of the Loewe klang 9 software is available during an update of the TV software, it will also be updated via the DIGITAL AUDIO LINK interface. For more information on the software update, refer to the instruction manual of your TV set. english During the update, you must not unplug the speaker.
Loewe klang 9 User handbook Specifications Disposal/Conformity Part number Ambient temperature [°C] Humidity [%] Dimensions [W x H x D in cm] Weight [kg] Digital power stages Acoustic principle Speaker equipment Mains voltage [Volt 50/60 Hz] Power consumption [Watt] Network standby [Watt] Setting range of intensity Transmission range (acoustic) Maximum sound pressure Transmission range (electrical) Connections Disposal 57201xxx Min. 5/Max. 35 Max. 80 25,2 x 71,2 x 25,8 15 1 x 75 W + 2 x 27.
Loewe klang 9 Service Qualifi Pty Ltd 24 Lionel Road Mt.Waverley VIC 3149 Australia Tel +61-03-8542 1111 Fax +61-03-9543 3677 E-mail: info@qualifi.com.au EET Europarts Loewe Denmark Bregnerødvej 133 D 3460 Birkerød, Denmark Tel +45 45 82 19 19 E-mail: info@eeteuroparts.dk Loewe Opta Benelux NV/SA Uilenbaan 84 2160 Wommelgem, België Tel +32 - 3 - 2 70 99 30 Fax +32 - 3 - 235 48 37 E-mail: ccc@loewe.be Gaplasa S.A.
