Users Manual

Loen Engineering
PLI Star Bracelet 30 Jan 2020
The Star bracelet has a robust slim housing
that is permanently sealed and waterproof. It
is located by polling the bracelet with a unique
ID code.
Each Star bracelet has a unique Star ID. There
can be 1000’s of bracelets in the same area
and only the one being searched for will
respond and be located. There is an unlimited
number of unique Star IDs available.
It works with standard PLI wrist straps.
The internal lithium coin cell provides 30 days of battery life, if left in the dark. The battery remains fully
charged with 8 hours of daylight per month.
For clients that remain indoors, or have little exposure to sunlight, the Star bracelet needs to be
recharged once per month, perhaps while changing the strap. A household LED light bulb works
perfectly for charging. A daylight colour 500 lumen blub, placed 2 inches above the solar panels on the
top of the Star bracelet will charge the battery fully in 8 to 10 hours. Do not use an incandescent or
halogen lamp, as the heat will harm the PLI Star bracelet.
The Star System does not use cellular or wifi networks. The Star System is independent of
infrastructure.
Unless the Star bracelet is being actively searched for, it does not transmit any signals. The Star
bracelets remain dormant and do not radiate any power. This is important for air travel. There are also
no concerns with radiated energy close to the human body, as there are no transmitted signals.
It is impossible for anyone to eavesdrop or locate the Star bracelet, unless they have the Star System
hardware and know the unique Star ID of the bracelet. This provides security and peace of mind.