tm Biometric SafeCase t m w w w. B i o S a f e C a s e . c o m tm Biometric SafeCasetm www.BioSafeCase.
SafeCasetm by LockStatetm www.BioSafeCase.com The SafeCasetm is a biometric access controlled safe box offered by LockStatetm. Its solid structure and penetration resistant design makes it ideal for storing valuables such as jewelry, cash, handguns and other precious items. Powered by state-of-the-art biometric sensors, the SafeCasetm combines high security with complete access control. Your SafeCase tm comes complete with a quick start guide, an easy-to-understand operating manual and a security cable.
SafeCasetm OVERVIEW USER ENROLLMENT 1. Press and hold the Add/Delete and Start buttons for 2 seconds. The unit will beep and the LED light will flash green. You have now entered the enrollment mode. y 2. Place and hold your finger on the sensor with your fingertip at the top for 2 seconds. Do not press the button. 3. Make sure that your finger lays flat and even over the sensor. Slowly swipe your finger from top to bottom, taking 2 seconds to complete the swipe. Move your entire finger across the sensor.
DELETING ALL USERS 1. Press and hold the Add/Delete and Start buttons simultaneously for 2 seconds. You will see the LED flash red. OPENING THE SafeCasetm Fingerprint Access 1. Press the start button (see figure 1) until the LED flashes green and the sensor beeps once. 2. Continue to hold the Add/Delete and Start buttons for an additional 10 seconds. You will see the LED turn green as the sensor deletes ALL users. 3. 2.
LOCKING THE SafeCasetm tm To lock the SafeCase , close the door and then press the Start button. The unit will then lock. ACCESSORIES Your SafeCasetm comes with a security cable that can affix the unit to a permanent object and render the unit immobile. To secure the SafeCasetm follow these steps: 3. Wrap the security cable around a permanent object much in the way a bicycle lock works.
Q: If my finger gets cut off, can someone else use it to access the SafeCasetm? FAQ’S Q: Can I access the SafeCasetm with my finger after swimming or showering? A: Mostly yes. However, if you have been exposed to water for an excessive period of time, it is possible that the moisture retained in your finger could temporarily modify the structure of your print resulting in the necessity to swipe your finger several times or wait a brief period while your fingerprint return to normal.
SafeCasetm WARRANTY warrants to the original end-user consumer of any LockStatetm safe that the craftsmanship, workmanship and materials of the mechanical components on all safes made by LockStatetm are free from material defects for a period of 1 year. In the event that any mechanical component of a LockStatetm safe is not free from material defects, LockStatetm will repair or replace the safe.