REV:0.3 ERP机型:PL35G2UQ-GL-SMT00010A-V1 ERP P/N: 描述: 说明书:PL35G2UQ/PGD1128FPW,SMT000,REV.A,196×196MM, 封,底面:128g双粉纸双面过哑油,双面印4C+2专,内页80g书纸,双面印单黑,18页36面装订本, RoHS2.
Table of Contents Section 1 - Product Highlights 1.1 Product Features Section 5- Advanced Features 1 Section 2 - Product Overview 2.1 Product Overview - Outside 2 2.2 Product Overview - Inside 3 2.3 Understanding Your New Lock 4 2.4 Keypad Display Switch 5 2.5 2.6 2.7 2.8 2.9 Factory Reset Program | Pairing Button Rebooting Your Lock Low Battery Changing The Battery 5 6 7 8 9 Section 3 - Using Your Smart Lock 3.1 3.2 3.3 3.
1.1 Product Features Video Monitoring and Recording See who's at your front door with Live View camera streaming, real-time high-resolution video from your smartphone. Video recordings are stored locally with no monthly fees. Patented Anti-Peep PIN Genie® Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number.
2.1 Product Overview- Exterior Video Camera Microphone Bluetooth Icon OK Button Low Battery Alert Screen Lock Icon Fingerprint Sensor Video Doorbell Light Indicator Video Doorbell Button Key Hole Key Hole Cover Restart Pin Hole 9V Battery Emergency Charging Socket 2 Speaker SECTION 2.
2.2 Product Overview - Inside Battery Cover Doorbell Program Button Reset Button Display Keypad Switch Thumbturn Low Battery|Door Sensor LED SECTION 2.
2.3 Understanding Your New Lock After the installation of your new Lockly VisionTM, understanding some key functions of operating your smart lock is important. The next sections will walk you through configuring Access Codes, adding fingerprints, video doorbell recording, resetting, pairing, configuring your Offline Access CodeTM (OAC) and other features of your lock. For any questions you can always visit http://lockly.com/help for assistance.
2.4 Keypad Display Switch For you peace of mind, the exterior keypad screen can be locked and turned off by using the ON/OFF switch at the back panel (PART G) of the smart lock. When it is switched off, people who are outside cannot enter any access codes to unlock the door. OFF ON 2.5 Factory Reset Button In order to restore the Lockly to factory default settings, you must have your “Activation Code” available.
2.6 Program |Pairing Button In case you need to re-pair your lock to your Vision Connect hub, follow the steps below: 1. Slide up the battery cover and press the Program button once until the screen shows the Pairing button (PA). Program Button 2. Press PA button and wait till you hear 2 short beeps. (You might have to wait up to 30 seconds) RESET 3. On the Vision Connect hub, press the reset button 3x with a pin or paper clip. You will hear a long beep, if pairing is successful.
2.7 Rebooting Your Lock NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly lock. The reboot button is located in the middle of the two 9V battery backup sockets.
2.8 Low Battery When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, video doorbell and recording will be disabled. You will have few more chances to unlock your smart lock either by a password, Lockly APP or fingerprint.
2.9 Changing The Battery Under normal use, the Lockly VisionTM battery will last up to 8 months. Please change your batteries when the low battery notification is issued. For best practice, always use new Alkaline batteries by a major brand. Be sure to unscrew the screw located on the top of the cover before sliding the cover up. Do not pull the ribbon. Remove top layer of batteries using your finger tips. Push the batteries against the spring to loosen and remove one by one.
3.1 Configuring Access Pair your lock to your smart phone to manage your access codes. Follow the on screen instructions to complete the setup. There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown.
3.2 Adding a Fingerprint NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. Your smart lock can register up to ninety-nine (99) fingerprints. Use the Lockly app to add fingerprints. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep.
3.3 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract only metadata from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Sensor Core Position your finger on the center of the sensor 12 SECTION 3.
3.3 Fingerprint Scanning Directions (Continued) OK X X OK X X Top View Side View Correct SECTION 3.
3.4 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition • Place your finger to completely cover the sensor with maximum contact surface. • Position the center of your finger (core) to the center of the sensor. • Hold your finger still for more than a second until you hear a beep. • Scan a finger that is clean and free from dirt. If a finger is cracked and dry, lightly moisten the finger to improve recognition with hand sanitizser or moisturizer.
4.1 Locking/Unlocking with Access Codes Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or voice. Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. OK Button If the Access Code entered is correct, the door will unlock.
4.2 Locking/Unlocking Lockly with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green LED will light up on the fingerprint scanner. You can then open the door. If you see a Red LED, it means your fingerprint is not recognized. You must wait until the red LED is off to try again.
4.3 Locking/Unlocking with Physical Key Exterior View We presumed you will not be using the key on a regular basis. To better protect you from malicious lock bumping, video will start recording whenever a key or bumping devices are used to unlock the door. To unlock your lock using the physical key (included), open the key cover by sliding the cover on either left or right direction to reveal the keyhole. Insert the key and turn clockwise to unlock the door. Again, this will trigger the video recording.
4.4 Locking/Unlocking Lockly with App You must have the Lockly iOS or Android app installed in order to lock and unlock with the smartphone app, connect with voice assistant controls like Alexa or the Google Assistant and to access video doorbell feature. Please download the app from the correct store by visiting the link below or searching “Lockly” in the correct app store. Scan or visit Lockly.com/app 18 SECTION 4.
4.5 Locking and Unlocking with Voice Assistant Control Once your Lockly Vision and its base has been installed and configured correctly, make sure you enable the Lockly Google Home Action and Amazon Alexa Skill first before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked. - Ok Google, unlock my Back Door.* - Ok Google, is my Back Door locked? - Ok Google, lock my Back Door.
4.6 Safe Mode - Overview Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding 3 seconds. for Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time.
4.6 Disabling Safe Mode There are four (4) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door.
5.1 Video Doorbell Lockly Vision has a built-in HD video doorbell with real-time video streaming on your smartphone and real-time 2-way voice interaction. Recordings are stored locally on the SD micro card, with no monthly fees, and you can access video recordings from anywhere using the Lockly app.
5.1 Video Doorbell When the doorbell is pressed, you will receive a notification through the Lockly app. Once you tap on the notification, app will automatically open to allow you to see who's at your door. Tap the Call icon to initiate conversation. To unlock door, tap the door icon or tap End Call to stop video. Enhanced Alert Notification Lockly VisionTM has an enhanced alert notification feature.
5.1 Video Doorbell Vision enables you to attend to your door when you are not at home. While using the app, you can use the icons below to view, initiate conversations and unlock door. Live View You can open the Lockly App and tap on the camera to see what Vision sees at all times. Timer Indicates the number of seconds remaining before the video call ends. Microphone Slide to unmute and start talking to your visitor. Unlock Tap icon to unlock door. End Call Tap icon to hang up without opening the door.
5.1 Video Doorbell Video Recording Lockly Vision stores video recording on the local SD card and recording can be accessed on the log history on your Lockly app. Vision automatically initiate video recording when below conditions take place: Doorbell button was pushed Keyhole cover was opened Offline Access Code™ was used* eKey was used* Wrong (PIN) access code was entered REMINDER: - Video recordings can be customized through the Lockly App settings*.
5.2 Offline Access CodeTM The Offline Access CodeTM (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access CodeTM within the app.
5.3 Sub-Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly® smart lock. The sub-admin permission can be setup through the Lockly App then Add A New User. You can select the Validity Period and User Permissions of the sub-admin. Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range.
6.1 Re-keying Lockly smart lock comes with a 6-pin cylinder which can be replaced with regularly purchased DIY re-keying kit available in the market. If you are not familiar with this process, please contact a professional locksmith. For more information, visit : http://support.lockly.com/faq/rekeying/ 28 SECTION 6.
7.1 Important Notes Auto Lock Feature You can program the auto lock timing through the Lockly App. If auto-lock is not activated and door is still open, the touch-screen will remain lit, simply press the the keypad to lock. on One-Touch Locking You can always manually lock by touching anywhere on the touchscreen. Lockly smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly App.
8.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DO • Rinse the touchscreen with warm water prior to cleaning. • Use the application of soap with a damp, lukewarm cloth. • Airdry or wipe dry with a soft microfiber cloth to avoid scratches. DON’T • Don’t use abrasives, high alkaline cleaners, or gasoline to clean your lock. • Don’t apply cleaning detergent directly in sunlight or at high temperatures.
9.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry.
Certified FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2.
封底 USA 9 665706 | CHINA 201310487970 | HONG KONG 1194496 | EUROPE 3059689 | AUSTRALIA 2013403169 | RUSSIA 2665222 | TAIWAN 621028 | KOREA 101860096 | INDONESIA 0020160364 | Other Patents Pending LOCKLY® All Rights Reserved Lockly Vision is a smart lock with built-in HD video doorbell that combines Lockly's award winning smart lock features and technology with the convenience of today's most popular video doorbells. Lockly makes life easier and safer.
REV:0.2 ERP机型:PL35G2UQ-GL-SMT00010A-V1 ERP P/N: 描述:安装指引:PL35G2UQ/PGD1128FPW,SMT000,REV.A,196×196mm,128g双粉纸, 双面4C+2专(2915C+7540C)印刷过哑油,14页28面装订本,(其中有一张折叠页),ROHS2.
CAUTION Contains Electrostatic- sensitive (ESD) parts. Avoid touching with bare hands. For best practices, (1) ground yourself by (a) touching a metal surface to discharge any ESD you might have; (b) changing clothes f you are sparky; and (2) avoid touching the internal pins.
INSTALLATION OVERVIEW AND PARTS LIST Parts List Labeled As I D G e TAPE Adhesiv E e TAPE Adhesiv E F 2x H 2x B A Q P C N L K 4x Description A Keys B Exterior Assembly C Exterior D Mounting Plate E Adhesive F PM5×60mm Screw G Interior Assembly H PM4*12MM Screw I Battery Cover J Deadbolt K KA4*20MM Screw L Strike Plate N Dust Box P Wired Sensor Q Sensor Magnet R Vision Connect S LAN Cable T Power Plug U SD Card V Activation Card R V J Lockly Visio
STEP 1: PREPARE DOOR FOR INSTALLATION 1.1: To complete installation, you would need the following: Flathead Screwdriver Phillips Screwdriver Ruler 1.2: Prepare door and remove existing lock. If necessary, use provided Installation Template to prepare door.
STEP 2. ADJUST DEADBOLT AND INSTALL 2.1 Deadbolt slit hole must be aligned to the center of the door hole. If not adjust as shown below: 2.1.1 Wear gloves during adjustment to prevent pinching your hands (b) Deadbolt at 2-3/4" (70mm) (default shipping status) (a) I. Push the crank (a) to extend the deadbolt (b) (c) (d) II. Hold the metal plate (c) and twist the deadbolt body (d) clockwise till it snaps to 2-3/8" (c) (d) III.
STEP 2. ADJUST DEADBOLT AND INSTALL 2.2 Extend the deadbolt by inserting a flat head screwdriver on the slit hole or by pushing the crank towards the metal face plate. 2.
STEP 3. INSTALLING THE EXTERIOR ASSEMBLY (B) 3.1: Check the Exterior Assembly alignment to your door hole and deadbolt, before you peel off the cover of the adhesive strip. 3.2: Before placing the exterior assembly on the door, make sure the torque blade is in vertical position and the deadbolt is extended.
STEP 4. INSTALLING THE INTERIOR ASSEMBLY (G) 4.1: Check the mounting plate alignment to your door hole before you peel of the cover off the adhesive strip. 4.2: Place the mounting plate on the interior side of the door. Guide the cable to the opening ear on the side of mounting plate and make sure the torque blade is at the center of the mounting plate. F(2X) 4.3: Without using any tools, insert 2 screws (F) on the side of the torque blade.
STEP 5. PREPARING DOOR SENSORS FOR INSTALLATION > Do not install the door sensor yet. You will install the sensor on STEP 8 Lockly Vision comes with a pre-installed door sensors consisting of two parts: Part P - Sensor Part Q - Sensor Magnet Make sure you install the Door Sensors indoors on a clean and dry surface. Gently wipe the surface of your door and door frame before installing. IMPORTANT: Gap must be less than 3/4” when installed.
STEP 5. PREPARING DOOR SENSOR FOR INSTALLATION When you are installing the door sensor, make sure the arrow of the wired sensor (P) is placed next to the arrow of the sensor magnet (Q) as close as possible. OR 2-3/8" (60mm) < 3/4" (< 20mm) P Q EVA If needed add Foam Pads to level P & Q as much as possible.
STEP 5. PREPARING DOOR SENSOR FOR INSTALLATION 5.1 The Interior assembly comes with pre-installed wired door sensor for right swing doors with 2 ¾" (70mm) backset*. Discard the excess part (e) for doors with 2 ⅜" (60mm) backset as shown below: 5.2 For left swing doors, re-route the door sensor wire through the side channel as shown below. Use foam pad (f) to secure the wire.
STEP 6. INSTALLING THE INTERIOR ASSEMBLY (G) 6.1 From the cable coming from the external assembly (PART B), plug the small cable connector x to y and screw tightly as shown: (x) (y) Connect and Screw Do not touch the pins inside 6.2 Plug the larger cable that is coming through the door into the Interior (PART G) lock. Match the red side of the plug with the red on the socket. Ensure it is inserted tightly.
STEP 6. INSTALLING THE INTERIOR ASSEMBLY (G) 6.3 Before placing the interior assembly to the mounting plate, ensure the thumb turn is vertical. 6.4 Place the interior assembly against the mounting plate and make sure the torque blade is inserted to the thumb turn shaft. RESET PROGRA M MAKE SURE IT IS IN THE VERTICAL POSITION Torque Blade Thumb turn shaft Push the thumb turn shaft into the torque blade. 6.
STEP 7. INSTALLING BATTERIES 7.1: While the door is open and deadbolt is extended, place the ribbon inside the compartment and insert only 3 batteries at the bottom layer with correct polarities. 7.2 Press and hold the program button before inserting the 4th battery. The lock will automatically do a self-check. The self-check process is very important to ensure the installation is done properly.
STEP 8. INSTALLING THE DOOR SENSOR Make sure you have prepared the door sensor for installation according to Step 5 8.1 Peel off the paper layer of the adhesives from the back of the wired sensor (P). 8.2 Position the wired sensor (P) to the edge of the door. Attach and secure with the adhesives. 2-3/4" 70mm 2-3/8" 60mm 8.3 Retract the deadbolt by turning the thumb turn, then close the door.
STEP 9: INSTALLING THE DOOR STRIKE Install the door strike. Install the door strike to your door frame and proceed to the last step of installation of your new lock. You may use our supplied door strike or use your existing door strike as long as the deadbolt moves smoothly in and out of the door strike. As there are many types of doors, you may need to make slight adjustments so the deadbolt moves smoothly.
STEP 10. VISION CONNECT SETUP Congratulations, you are a few steps away from completing the setup of Lockly Vision™. To enable video doorbell, add Live Monitoring and Voice Assistant Control with the Google Assistant or Amazon Alexa, you will need to setup the Vision Connect included in the box.
STEP 10. VISION CONNECT HUB SETUP 10.1: Select a secure location to setup the Vision Connect. Choose the nearest Wi-Fi router to directly plug the LAN cable that comes with Lockly Vision.
STEP 10. VISION CONNECT HUB SETUP 10.2:Ensure the SD card that comes with Vision Connect is properly inserted. SD card is included 10.4: Plug the USB adapter to a wall socket. 10.3: Ensure to plug the LAN cable to the nearest Wi-Fi router to Lockly Vision. 1ft cable (S) Included 10.5: After connecting to power, wait for 2 minutes for Vision Connect to self calibrate. Once the LEDs turned RED and blinking yellow, Vision is ready to connect.
Vision Connect Troubleshooting Guide Solid Red ON LED INDICATOR After you plug in the LAN cable and Power adapter, and wait for 2mins for Vision Connect to self calibrate.
STEP 11. PAIRING LOCKLY VISION You have completed the Lockly Vision and Vision Connect installation and setup. Now you’re ready to pair your lock. 11.1:Download the Lockly App and register an account. Scan or visit Lockly.com/app 11.2: After you have you successfully registered an account, you can proceed to Add New Device and follow the step by step on screen instructions. IMPORTANT REMINDERS: 1. Remember to register for warranty. 2. Allow your mobile phone to receive push notifications. 3.
The Lockly Vision also works with other Smart Home devices. Check on the status or remotely lock and unlock your door by your voice using Amazon Alexa or the Google Home Assistant. To setup your lock to work with either of those platforms, download the Amazon Alexa or the Google Home Assistant app and add a new skill with Amazon Alexa or an Action with the Google Home Assistant. Add the “Lockly” Skill (Alexa) and Action (Google) then follow on screen instructions to finish set up.
Certified FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2.
VISION ™ We’re here to help! help@lockly.com https://lockly.
封底 VISION ™ For an online version of this installation guide and videos, visit: http://lockly.