REV᧶2.1 ERP 㧉⨚᧶PL3522FW-HK-SMT00010A-V1 ERP P/N: 㙞承᧶说明书:PL3522FW/PGD829AFHK,SMT000,REV.C,145x210mm,80g书纸,双面单黑印刷, 22页44面装订本,“UMPGD82920191130”,RoHS2.
Table of Contents Section 1 - Product Highlights 1.1 Product Features Section 5 - Advanced Features 1 Section 2 - Product Overview 2.1 Product Overview- Exterior 3 2.2 Product Overview- Interior 4 2.3 Understanding Your New Lock 5 2.4 Factory Reset 6 2.5 Keypad Display Switch 6 2.6 Rebooting Lockly Secure 7 2.7 Low Battery 8 2.8 Changing the Battery 9 5.
1.1 Product Features Patented Anti-Peep Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. To experience the patented and innovative keypad software, powered by PIN Genie TM , please download the PIN GenieTM Vault App from iOS App Store or Google Play. Multiple Access Codes & Monitoring Store up to 18 Access Codes for family, friends and guests, as well as monitor entry and exit records.
Automatic Lock Owners no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly Secure will automatically re-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the keypad in case your smart lock runs out of battery. 2 SECTION 1.
2.1 Product Overview- Exterior Front (Front Body) Touchscreen RFID Card Reader Keypad Buttons Handle Fingerprint Reader Key Hole Key Hole Cover 9V Battery Back Up Socket Power Status Lock Status icon Bluetooth light OK Button Bluetooth icon SECTION 2.
2.2 Product Overview - Interior Back (Main Body) Battery Compartment Cover Battery compartment *Operated by 4 X AA size alkaline batteries ( not included ) Program Button Touchscreen Switch Reset Button Anti-theft Button Inside Handle Thumbturn 4 SECTION 2.
2.3 Understanding Your New Lock NOTICE The Default Access Code is 123456 After the installation of your new Lockly, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes, deleting Access Codes, adding and deleting fingerprints , adding and deleting RFID cards and also how to configure your OAC (Offline Access Code). For any questions you can always visit http://lockly.com/help for assistance.
2.4 Factory Reset In order to restore the Lockly to factory default settings, you must have your “Initial Code” available. The Initial Code can be found on the Initical Code Card that came with your smart lock. (See Quick Start Guide) After you have the Initial Code ready, push the reset button on the back panel of the Lockly to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has been reset, all the data previously stored will be deleted. Reset Button 2.
2.6 Rebooting Lockly Secure NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located below the keyhole from the exterior of Lockly Secure Lux. You will need something small such as a paperclip, to press the reboot button.
2.7 Low Battery When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1 minute.
2.8 Changing the Battery Open the battery compartment cover and insert 4 AA alkaline battery as shown below. • Make sure the batteries are correctly oriented. • Replacement of batteries does not affect programmed data. • Replace only with new batteries. DO NOT mix with used batteries. 1 2 3 AA 1.5V X 4 Whenever batteries are replaced, reconnecting the smart lock to your smartphone App is required. NOTICE SECTION 2.8 If you have not yet downloaded the app, visit: Lockly.
3.1 Configuring Access NOTICE The Default Access Code is 123456 Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A Maximum of 8 sets of Access Codes can be stored for use. How to Use the Keypad There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here.
3.2 Entering Programming Mode To enter Programming Mode, remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons. Simply press the Program button to enter programming mode. Program Button Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. Access Codes previously added by Programming mode will be cleared. To end Programming Mode, press the Program button anytime.
3.3 Adding an Access Code While in Programming Mode, select “1AD” to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1AD” press “Pd” to add an Access Code. Enter your new 6 - 8 digit Access Code and press when you are finished. You will then re-enter the code to confirm your new Access Code. Remember, just touch the digit you need within the circle around each 3 numbers. There is no need to touch the exact location of the number.
3.3 Adding an Access Code (Continued) If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel. To exit or cancel, you can always press or If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left). Press OK to return to the Programming Screen and try again. See Section 3.3 OK Button SECTION 3.
3.4 Deleting an Access Code While in Programming Mode, select “2DE” to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” press “Pd” to delete an Access Code. Example Only Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 .
3.4 Deleting an Access Code (Continued) Once you have selected the Access Code you want to delete, Lockly will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0. Press NOTICE SECTION 3.4 to cancel. There are two incidents where your Access Code cannot be deleted. There are no Access Codes set. The factory default Access Code cannot be deleted. No Access Codes Set to delete, or There is only one (1) Access Code saved in the smart lock.
3.5 Checking the Access Codes While in Programming Mode, select “3CH” to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 . OK Button Rotate through the different Access Codes by touching any number on the screen.
3.6 Adding a Fingerprint We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable. Please check your fingers before registration to make sure the finger you want to register will be acceptable by our system. Otherwise, use an alternative finger to ensure successful registration.
3.6 Adding a Fingerprint (Continued) While in Programming Mode, select “1AD” to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1AD” press “FP” to register a Fingerprint. Upon pressing “FP”, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior of Lockly. Once you’re in Fingerprint Registration Mode you will see two numbers displayed on keypad.
3.6 Adding a Fingerprint (Continued) NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift your finger and repeat the process slowly until the digit “6” shown on the screen becomes “1”.
3.7 Fingerprint Scanning Directions The fingerprint sensor equipped in Lockly is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Sensor Core Position your finger on the center of the sensor 20 SECTION 3.
3.7 Fingerprint Scanning Directions (Continued) OK X X OK X X Top View Side View Correct SECTION 3.
3.8 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition • Place your finger to completely cover the sensor with maximum contact surface. • Position the center of your finger (core) to the center of the sensor. • Hold your finger still for more than a second until you hear a beep. • Scan a finger that is clean and free from dirt. If a finger is cracked and dry, lightly moisten the finger to improve recognition.
3.9 Deleting Stored Fingerprints* While in Programming Mode, select “2DE” to delete a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” to delete, press “FP” to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen. Tap number to rotate to the next registered fingerprint. When you have found the fingerprint ID you want to delete, press and hold the OK button for 3 seconds to delete.
3.10 Adding an RFID Card While in Programming Mode, select “1AD” to add an RFID card. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “1AD” press “Id” to add an RFID card. Put the RFID card to the RFID card sensor position on exterior panel. 24 PASS will show on the keypad once card is registered successfully. SECTION 3.
3.11 Deleting an RFID Card While in Programming Mode, select “2DE” to delete an RFID card. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing “2DE” press “Id” to add an RFID card. Your registered RFID card will be displayed on the screen. Tap the screen to show the next registered RFID. When you have found the RFID card you want to delete, press and hold the OK button for 3 seconds to delete. SECTION 3.
3.12 Adding Secure Link Lockly Secure Link adds live status monitoring and voice assistant control capabilities to your Lockly Smart Lock. If you purchased a Secure Pro model, the Secure Link is included in your package. For all other Lockly products, the Secure Link can be purchased and added anytime. To set up the Lockly Secure smart lock with Secure Link Wi-Fi Hub and Door Sensor, launch the Lockly App on your iOS or Android device.
4.1 Locking/Unlocking Lockly with Access Codes Lockly Secure can be unlocked using 1 of 5 ways - via your stored Access Code, registered fingerprint, RFID Card, smartphone with Bluetooth, or with the physical key supplied with your lock. Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the . Press OK anytime to reset if you entered the wrong digit. OK Button If the Access Code entered is correct, the door will unlock.
4.2 Locking/Unlocking Lockly with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior handle of the lock. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green LED will light up on the fingerprint scanner. You can then push down the handle and open the door. If you see a Red LED, it means your fingerprint is not recognized.
4.3 Locking/Unlocking Lockly with App You must have the Lockly iOS or Android app installed in order to lock and unlock with the smartphone app. Please first download the app from the correct store. Scan or visit Lockly.com/app 4.4 Locking/Unlocking using RFID Light up the screen by touching the keypad and move your RFID card closer to the panel. You can push down the handle and open the door after it chimed. SECTION 4.
4.5 Locking/Unlocking Lockly with Physical Key Exterior View To unlock your Lockly using the physical key (supplied), open the key cover below the exterior handle by pushing the top part of the cover to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door. 30 SECTION 4.
4.6 Locking and Unlocking with Voice Assistant Control Once your Lockly Smart Lock and Secure Link Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly Google Home Action and Amazon Alexa Skill first before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked. - Ok Google, unlock my Back Door.* - Ok Google, is my Back Door locked? - Ok Google, lock my Back Door.
4.7 Safe Mode Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time.
4.7 Safe Mode ( Continued ) There are four (4) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door.
4.8 Lock and Unlock using Anti-theft Button The Anti-theft button is designed to prevent outsiders from picking your inside door handle with use of wires or improvised tools to unlock door. This also helps to prevent unconscious unlock by children or pets from the inside of your home. This feature is activated when the Anti - theft Button is popped - out.
4.9 Anti - Theft Button Switch Lockly Secure Lux is shipped default with anti - theft button deactivated. To Activate, locate the switch at the back on the indoor handle and push to the LEFT. To Deactivate, press the Anti-Theft Button and push the switch to the RIGHT. Inside view of the inner handle R Anti-theft ON/OFF Key L 4.10 Locking from the Outdoor Lockly smart lock will automatically lock once your door is closed.
5.1 Offline Access Code (OAC) The Offline Access Code (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access Code within the app.
6.1 Important Notes Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the Lockly App. If auto-lock is not activated and door is still open, the touchscreen will remain lighted, simply press the on the keypad to lock. One-Touch Locking You can always manually do a quick lock by touching anywhere on the touchscreen. Lockly smart lock is shipped with this feature already activated.
7.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DO DON’T • Rinse the touchscreen with • Don’t use abrasives, high warm water prior to cleaning. alkaline cleaners, or gasoline to clean your lock. • Use the application of soap with a damp, lukewarm cloth. • Don’t apply cleaning detergent directly in sunlight or at • Airdry or wipe dry with a soft high temperatures. microfiber cloth to avoid scratches.
8.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry.
Certified Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
SECURE We’re here to help! help@lockly.com https://lockly.
Lockly Smart Lock - Secure Lockly Smart Lock - Secure Plus Lockly Smart Lock - Secure Pro Lockly Smart Lock - Secure Lux U.S. Patent No. 9,665,706 Other Patents Pending With All Rights Reserved About Lockly Secure, Secure Plus, Secure Pro and Secure Lux About Lockly Secure, Secure Plus, Secure Pro and Secure Lux are keyless smart locks equipped with the patented PIN GenieTM, which is a peep proof and hidden camera proof algorithm software. Lockly makes your life easier and safer.