ACCESS TOUCH USER MANUAL
Table of Contents Section 1 - Product Highlights 1.1 Product Features 1 Section 2 - Product Overview 2.1 Product Overview - Exterior 2 2.2 Product Overview - Interior 3 2.3 Getting the Most From Your LOCKLY 4 2.4 Pair Lock with LOCKLY App 5 2.5 Resetting Your Lock 6 2.6 Low Battery 7 2.7 Changing the Battery 8 Section 3 - Using Your Smart Lock 3.1 Adding a Fingerprint 9 3.2 Fingerprint Scanning Directions 12 3.3 Deleting Stored Fingerprints 13 3.
1.1 Product Features Advanced 3D Fingerprint Recognition Biometric Fingerprint Recognition protocol stores up to 99 unique fingerprints. Accepts only actual fingerprints (no copies or lifted prints) for extra security. Auto Lock Feature Never worry that you forgot to lock your door. Custom auto lock feature can be set to automatically lock 5 seconds up to 5 minutes after unlocking, making sure your door is always secure.
2.1 Product Overview - Exterior Key Cylinder (NOT INCLUDED) Fingerprint Sensor 9V Backup Contacts SECTION 2.
2.2 Product Overview - Interior Battery Cover Battery Compartment (8 x AA Alkaline Batteries) Reset Button Program Button Alert (beep) speaker Thumb-turn 3 SECTION 2.
2.3 Getting the Most From Your LOCKLY Thanks for purchasing your new LOCKLY. To get the most out of your lock be sure to read completely through this manual to learn all of its features and capabilities. LOCKLY smart locks are at their full potential when used with the free LOCKLY app. Be sure to download to take advantage of all of the connected features. If you have any questions or need help contact customer care at help@lockly.com or online LOCKLY.
2.4 Pair Lock with the LOCKLY App To pair your lock with the free LOCKLY mobile app, you must have your Activation Code available. The Activation Code is specific to your lock and is located on the Activation Code Card included with you smart lock. The Activation Code is unique to each specific lock. DO NOT LOSE IT. Keep LOCK SERIAL it in a safe place, as you will not be able to PGDXXXXXXXXXXXXXXXX ACTIVATION CODE XXXXXXXX SCAN & SAVE re-pair or reset your lock without it. 1.
2.5 Resetting Your Lock In order to restore your lock to factory default settings, you must have your “Activation Code” available. The Activation Code is specific to your lock and is located on the Activation Code Card included with you smart lock, see page (5). To reset, push the reset button located under the battery cover, in the lower right corner. WARNING: once the smart lock has been reset, all previously stored data will be deleted.
2.6 Low Battery Alert LOCKLY Access Touch will notify you with a continuous beep that it's time to change the batteries before they reach critical level. You should replace the batteries immediately to avoid the lock from shutting down and auto locking. If you do not change the batteries after hearing the low battery warning alert beeps, the alert will eventually stop. You will then have 3 chances to unlock using your fingerprint.
2.7 Changing Batteries Under normal use, batteries can last up to a year. Check batteries regularly and change right away when the low battery alarm notification is heard. As a best practice, always use new, major brand, alkaline batteries. Open the battery compartment cover by unscrewing the screw located on the top of the cover and sliding the cover up. Install eight (8) new AA alkaline batteries as shown. Reinstall cover and tighten screw.
3.1 Adding a Fingerprint LOCKLY Access Touch can store up to 99 fingerprints. Fingerprints are added and registered using the free LOCKLY app for iOS or Android. Download the LOCKLY app from the App Store or Google Play then register a new fingerprint under Access > Fingerprint and follow the on-screen prompts. LOCKLY uses an advanced biometric sensor, providing the most secure fingerprint authentication.
3.1 Adding a Fingerprint (Continued) Make sure fingers and sensor are clean and free of dirt, oil, water, sweat, or any other moisture or foreign material. Sensor can be cleaned by wiping with a lint-free microfiber cloth. 1 3 2 1 On the LOCKLY app, select the LOCKLY Access Touch you wish to add a fingerprint. Go to Access > Access Management > Access > Fingerprint. 2 Select the finger you wish to register and tap "Start.
3.1 Adding a Fingerprint (Continued) 4 5 4 Enter a Fingerprint name to save the profile, then tap "Successfully Added" 5 Tap "Add Another Fingerprint" to register additional fingers or tap "Done" . TIP: Scan the same finger more than once to increase accuracy. SECTION 3.
3.2 Fingerprint Scanning LOCKLY fingerprint sensors use powerful fingerprint reading algorithms that are able to detect most fingerprints accurately and quickly, even in less than ideal conditions. Knowing how to place your finger on the sensor correctly helps with consistent and fast recognition. Sensor Core Position your finger on the Center of the sensor OK X X OK X X Top View Side View Correct 12 Incorrect SECTION 3.
3.3 Deleting Fingerprints 1 2 3 1 On the LOCKLY app, select the LOCKLY Access Touch you wish to delete a fingerprint on. Go to Access Management > Fingerprint. Select the fingerprint by name you wish to delete. 2 Select [DELETE USER] at bottom. 3 Confirm. Once a registered fingerprint has been deleted it cannot be recovered. You will need to re-register the finger as a new fingerprint to restore. SECTION 3.
3.4 Adding Optional Secure Link Wi-Fi hub Add Wi-Fi capability by adding the LOCKLY Secure Link Wi-Fi Hub. Securely control and manage your door from anywhere, anytime. Remotely lock or unlock, check door status, grant guest eKeys, Offline Access Codes™, and see who's coming and going, all from the convenience of your smartphone. The hub also enables voice assistant control using Alexa and Google Assistant.
4.1 Locking/Unlocking with Finger Unlocking Place a registered finger (to register see section 3.1.) to the fingerprint scanner on the low exterior of the lock. If your fingerprint is acknowledged, you will hear a “beep” a green LED will light, and the deadbolt will unlock. If you see a red LED, it means your fingerprint is not recognized. Wait until the red LED turns off, then try again. See Section 3.2.
4.2 Locking/Unlocking with App Open the LOCKLY app and select your lock (e.g., LOCKLY Access Touch) tap the lock or unlock icon. You will also need the app in order to lock and unlock with Amazon Alexa or Google Assistant. To download, visit the link below or search “LOCKLY” in the App Store or Google Play. Scan or visit LOCKLY.com/app 16 SECTION 4.
4.3 Locking/Unlocking with Physical Key Lockly Access Touch is designed to convert your existing deadbolt to a smart lock and keep your existing physical keys. To unlock your lock using the your physical key, insert key and turn clockwise or counter clockwise to lock or unlock the door. SECTION 4.
4.4 Locking and Unlocking with Voice Assistants LOCKLY Access Touch can be used with Amazon Alexa and Google Assistant with the addition of the optional LOCKLY Secure Link Wi-Fi Hub. Once installed and configured properly to your lock, make sure you enable the LOCKLY Action for Google Assistant or the Amazon Alexa Skill before performing voice commands. Once configured, you can ask questions such as door status or requests for your door to be locked or unlocked.
4.5 Rain Mode To protect the lock and extend battery life, LOCKLY Access Touch automatically enters Rain Mode whenever rain or water is detected on the fingerprint sensor for more than 45 seconds. When Rain Mode is activated, the fingerprint sensor will not respond. The lock automatically exits rain mode every 30 minutes and only reenters if rain or water is still detected. See below for ways to access during Rain Mode. ACCESS DURING RAIN MODE 1. Unlock using the LOCKLY app 2.
4.6 Welcome Mode Welcome Mode temporarily disables auto locking, keeping the door open for a specified period of time eliminating the need for fingerprint key access. Enable this feature through the LOCKLY App. Go to > Settings > Enable Welcome Mode, then slide button to enable and set the specific time you require your door unlocked. 1 20 2 SECTION 4.
5.1 eBadge An eBadge is a unique code that can be issued to another user giving them door access for a specific reoccurring time frame or a valid period of time. It requires them to download the free LOCKLY app and access can only be gained through the app (not the fingerprint reader). 1 2 3 1 To set up and send a code in the LOCKLY app, go to > Access > eBadge (at top) > Add eBadge, then follow the on-screen prompts. 2 Confirm you want to add an eBadge. 3 Give the eBadge name you will recognize.
5.1 eBadge (Continued) 7Y20LOCKLY 4 22 5 6 4 Select type of access: either a valid period of time or ongoing reoccurring (can be revoked at anytime). 5 Review and confirm access type. 6 Share unique eBadge code. SECTION 5.
6.1 Important Notes Troubleshooting Please visit LOCKLY.com/help for troubleshooting and the most frequently asked questions and answers. Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the LOCKLY® App. 9V Backup Access When your LOCKLY is out of power, you can temporarily activate the fingerprint sensor by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.
7.1 Cleaning Keeping your LOCKLY clean insurers optimal performance. Follow the recommendations below. DO • Use a microfiber cloth to DON’T • Don’t use abrasives, high clean the fingerprint Alkaline cleaners, or reader. solvents to clean your lock. • Clean with slightly damp • Don’t apply cleaners microfiber cloth to avoid in directly sunlight or scratches. during high temperatures.
8.1 Safety Precautions Read and remind all users of the following safety precautions LOCKLY Smart Locks do not have any user serviceable internal parts. Do not attempt to disassemble the lock. It may cause product damage and/or personal injury and will void any warranty. Do not use any inappropriate tools that might cause damage or malfunction to your lock. Always check and make sure your door is securely closed and locked when you leave to prevent unwanted entry.
FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ACCESS TOUCH We’re here to help! help@LOCKLY.com LOCKLY.
LOCKLY® All Rights Reserved LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY LOCKLY Secure Secure Plus Secure Pro Secure Lux Lux Compact Model 6S Model 7S Secure Link Vision™ Flex Touch Access Touch LOCKLY Secure, Secure Plus, Secure Pro, Secure Lux, Lux Compact, Model 6S, Model 7S, Flex Touch, Access Touch and LOCKLY Vision are keyless smart locks equipped with patented and advanced features such as the PIN Genie® hack-proof keypad, 3D Fingerprint Access, Offline Access Codes, eBadge
