R PL35H1UQ-GL-SMT00010A-V1 PL35H1UQ C M Y K VISION ™ SMART LOCK + VIDEO DOORBELL USER MANUAL DEADBOLT EDITION
Table of Contents Section 1 - Product Highlights 1.1 Product Features Section 5- Advanced Features 1 Section 2 - Product Overview 5.1 5.2 5.3 Video Doorbell Offline Access Code (OAC) Sub-Admin Access 2.1 Product Overview - Outside 2 2.2 Product Overview - Inside 3 2.3 Understanding Your New Lock 4 2.4 Keypad Display Switch 5 Section 7 - Important Notes 2.5 2.6 2.7 2.8 Reset Button Rebooting Your Lock Low Battery Changing The Battery 6 7.1 7 8 9 Section 3 - Using Your Smart Lock 3.
1.1 Product Features Video Monitoring and Recording See who's at your front door with Live View camera streaming, real-time high-resolution video from your smartphone. Video recordings are stored locally with no monthly fees. Patented Anti-Peep PIN Genie ® Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. Numbers are randomly distributed across 4 buttons, with 3 numbers in each button. Users can press any button showing their number.
2.1 Product Overview- Exterior Video Camera Microphone Bluetooth Icon OK Button Low Battery Alert Screen Lock Icon Fingerprint Sensor Video Doorbell Light Indicator Video Doorbell Button Key Hole Key Hole Cover Speaker Restart Pin Hole 9V Battery Emergency Charging Socket 2 SECTION 2.
2.2 Product Overview - Inside Battery Cover Battery Compartment ( Operated by 2 x 4 x AA Batteries) Doorbell Program Button Reset Button Display Keypad Switch Thumbturn Low Battery|Door Sensor LED SECTION 2.
2.3 Understanding Your New Lock After the installation of your new LOCKLY VisionTM, understanding some key functions of operating your smart lock is important. The next sections will walk you through configuring Access Codes, adding fingerprints, video doorbell recording, resetting, pairing, configuring your Offline Access CodeTM (OAC) and other features of your lock. For any questions you can always visit http://LOCKLY.com/help for assistance.
2.4 Keypad Display Switch For your peace of mind, the exterior keypad screen can be locked and turned off by using the ON/OFF switch at the back panel (PART G) of the smart lock. When it is switched off, people who are outside cannot enter any access codes to unlock the door. OFF SECTION 2.
2.5 Reset Button In order to setup the LOCKLY® to another smart phone, you must have your “Activation Code” available. The Activation Code can be found on the Activation Code Card (PART V) that came with your smart lock. Press Reset Button for one (1) second or till you hear a short beep Open the LOCKLY smartphone app to add your lock using the Activation Code Reset Button 6 SECTION 2.
2.6 Rebooting Your Lock NOTICE Reboot LOCKLY in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within LOCKLY. Press and release the reboot button when you want to reboot the lock. Your LOCKLY will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of LOCKLY lock. The reboot button is located in the middle of the two 9V battery backup sockets.
2.7 Low Battery When the battery is in seriously low condition, LOCKLY® will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, video doorbell and recording will be disabled. You will have few more chances to unlock your smart lock either by a password, LOCKLY APP or fingerprint.
2.8 Changing The Battery Under normal use, the LOCKLY VisionTM battery will last up to 8 months. Please change your batteries when the low battery notification is issued. For best practice, always use new Alkaline batteries by a major brand. Be sure to unscrew the screw located on the top of the cover before sliding the cover up. Do not pull the ribbon. Remove top layer of batteries using your finger tips. Push the batteries against the spring to loosen and remove one by one.
3.1 Configuring Access Pair your lock to your smart phone to manage your access codes. Follow the on screen instructions to complete the setup. There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown.
3.2 Adding a Fingerprint NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. Your smart lock can register up to ninety-nine (99) fingerprints. Use the LOCKLY® app to add fingerprints. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep.
3.3 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract only metadata from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. OK OK 12 SECTION 3.
3.4 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition • Place your finger to completely cover the sensor with maximum contact surface. • Position the center of your finger (core) to the center of the sensor. • Hold your finger still for more than a second until you hear a beep. • Scan a finger that is clean and free from dirt. If a finger is cracked and dry, lightly moisten the finger to improve recognition with hand sanitizser or moisturizer.
3.5 Adjusting Keypad Brightness 14 SECTION 3.
Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. OK Button If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, LOCKLY will flash red light. Three consecutive wrong attempts will put LOCKLY in “Safe Mode”. (See Section 4.
4.2 Locking/Unlocking with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.2. If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green LED will light up on the fingerprint scanner. You can then open the door. If you see a Red LED, it means your fingerprint is not recognized. You must wait until the red LED is off to try again.
4.3 Locking/Unlocking with Physical Key Exterior View We presumed you will not be using the key on a regular basis. To better protect you from malicious lock bumping, video will start recording whenever a key or bumping devices are used to unlock the door. To unlock your lock using the physical key (included), open the key cover by sliding the cover on either left or right direction to reveal the keyhole. Insert the key and turn clockwise to unlock the door. Again, this will trigger the video recording.
4.4 Locking/Unlocking with App You must have the LOCKLY iOS or AndroidTM app installed in order to lock and unlock with smartphone, connect with voice assistants like Alexa or Google Assistant and to access video doorbell feature. Please download the app by visiting the link below or search “LOCKLY” from the correct app store. Scan or visit LOCKLY.com/app 18 SECTION 4.
4.5 Locking and Unlocking with Voice Assistants Once your LOCKLY Vision™ and Vision Connect has been installed and configured correctly, make sure you enable the LOCKLY Action on Google or the Amazon Alexa Skill before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked.
4.6 Safe Mode - Overview 5 minutes. A 15 second video will be recorded once the lock entered into Safe Mode. When in Safe Mode, the lock status icon will start to flash. for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time. If you enter the wrong code, the keypad will then be disabled for 10 minutes. Countdown Prompt (Displayed in Minutes) Will start with 10 and countdown until 0.
4.6 Disabling Safe Mode There are four (4) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - LOCKLY® Bluetooth App Use the app that is synced to your LOCKLY to disable Safe Mode by unlocking the door.
4.7 Rain Mode Like other digital electronic products water can trigger to activate the touchscreen and fingerprint sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your LOCKLY to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected. Activate this feature on the LOCKLY app.
4.8 Shine Mode LOCKLY touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. 4.9 Welcome Mode SECTION 4.
5.1 Video Doorbell LOCKLY Vision™ has a built-in HD video doorbell with real-time video streaming on your smartphone and real-time 2-way voice interaction. Recordings are stored locally on the TF card, with no monthly fees, and you can access video recordings from anywhere using the LOCKLY® app.
5.1 Video Doorbell When the doorbell is pressed, you will receive a notification through the LOCKLY® app. Once you tap on the notification, app will automatically open to allow you to see who's at your door. Tap the Call icon to initiate conversation. Enhanced Alert Notification LOCKLY VisionTM has an enhanced alert notification feature. When someone rings your We suggest you keep this feature ON off SECTION 5.
5.1 Video Doorbell Vision enables you to attend to your door when you are not at home. While using the app, you can use the icons below to view, initiate conversations and unlock door. Live View You can open the LOCKLY® App and tap on the camera to see what Vision sees at all times. Microphone Tap mic to mute or unmute End Call Tap icon to hang up without opening the door. Unlock Tap icon to unlock door. TIP: Limit video interaction with guests to prolong battery life. 26 SECTION 5.
5.1 Video Doorbell Video Recording LOCKLY Vision™ stores video recording on the local TF card and recording can be accessed on the log history on your LOCKLY® app. Vision automatically initiate video recording when below conditions take place: Keypad was used * Doorbell button was pushed Keyhole cover was opened Offline Access Code™ was used* eKey was used* Wrong (PIN) access code was used and lock entered in to Safe Mode REMINDER: - Video recordings can be customized through the LOCKLY App settings*.
5.2 Offline Access CodeTM The Offline Access CodeTM (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the LOCKLY® app for iOS or AndroidTM first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access CodeTM within the app.
5.3 Sub-Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your LOCKLY® Add A New User. You can select the Validity Period and User Permissions of the sub-admin. Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range.
6.1 Re-keying LOCKLY smart lock comes with a 6-pin cylinder which can be replaced with regularly purchased DIY re-keying kit available in the market. If you are not familiar with this process, please contact a professional locksmith. For more information, visit : http://support.LOCKLY.com/faq/rekeying/ 30 SECTION 6.
7.1 Important Notes Auto Lock Feature You can program the auto lock timing through the LOCKLY® App. If auto-lock is not activated and door is still open, the touch-screen will remain lit, simply press the on the keypad to lock. One-Touch Locking You can always manually lock by touching anywhere on the touchscreen. LOCKLY smart lock is shipped with this feature already activated. You may deactivate this feature through the LOCKLY App.
8.1 Cleaning Making sure your LOCKLY® is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DO • Rinse the touchscreen with warm water prior to cleaning. • Use the application of soap with a damp, lukewarm cloth. • Airdry or wipe dry with a soft microfiber cloth to avoid scratches. DON’T • Don’t use abrasives, high alkaline cleaners, or gasoline to clean your lock. • Don’t apply cleaning detergent directly in sunlight or at high temperatures.
9.1 Safety Precautions Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; d’en compromettre le fonctionnement. IC Radiation Exposure Statement WARNING:This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer.
VISION ™ We’re here to help! help@LOCKLY.com https://LOCKLY.
To ensure you have access to the most updated and newly added features of your LOCKLY smart lock, please visit: www.LOCKLY.com/newfeatures For digital versions and instructional videos, please visit the following link: http://LOCKLY.
