WIRELESS TECHNOLOGY & CRANE INSTRUMENTATION DIVISIONS GS025 Radio Anemometer Installer and user guide WARNING! Carefully read and understand this manual and the GS320/GS550/GS820 Installer and User’s manual before proceeding. Manual before proceeding. GM025_ENG_rev.docx www.loadsystems.
IMPORTANT! Refer to the “GS320/GS550/GS820 Display & GS Series Sensors - Installer and User’s Manual” for complete information about installation, operation, maintenance, certification and warranty. GM025_ENG_rev.docx www.loadsystems.
BEFORE PROCEEDING Read and understand the following: For your safety and that of the people that come into contact with LSI products, understand the significance of the instructions included in this guide, respect all laws and regulations and comply with applicable standards. Pay particular attention to text boxes and the following words: WARNING! Warning: this denotes an instruction that if not complied with may lead to serious injury or death.
1. Overview The GS025 is a magnetically encoded radio anemometer. The wind speed values are computed from pulses of magnets inserted in the rotor. This means that this anemometer has no adjustment and thus never needs to be calibrated. sensor and the cabin mounted display unit. 3. Installation Its battery powered electronics gives it an extended autonomy and the radio connection allows it to be installed in remote locations with difficult access.
4. Operation The radio anemometer is fully functional. It does not need to be calibrated or adjusted. Refer to the GS320/GS550/GS820 manual for how to add this sensor to the sensor list to be displayed. To replace a battery, turn the battery cover ¼ turn counter clock wise and remove, the battery can then be changed and reclose the battery cover by turning ¼ turn clock wise. 5.
8. FCC and IC – Instructions to the User This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LSI Contact Information Technical support : LSI Technical Support is available 24 hours a day, 7 days a week from our Houston and Dubai locations. Please direct all technical support questions to either of these locations or contact us via email: techsupport@loadsystems.com GM025_ENG_rev.docx www.loadsystems.
