User's Manual

ManualsBrandsLM Technologies ManualsComputers & AccessoriesLM540 CLASS 1 BLUETOOTH USB ADAPTER

Table Of Contents

2TQuick Guide for BlueSoleil Version 6

LM540 Class 1 Bluetooth USB

Adapter

Quick Guide

1. System Requirements

At least 50MB of free disk space is required; Windows 7, Windows Vista or Windows XP

operating systems are supported.

2. BlueSoleil Installation

2.1 Before installing

•

Uninstall any previous versions of BlueSoleil installed on your computer before installing this

version.

•

Click Start -> Control Panel to open Control Panel

•

Choose Add or Remove Programs.

Please note it does not matter whether the bluetooth adapter is plugged in or not into the USB

port of your PC during installation.

Select BlueSoleil from the program list and uninstall it.

2.2 Installing BlueSoleil

• Insert the LM541 installation CD into your CD-ROM or DVD-ROM drive.

If you did not receive a CD with your product, you can still download the latest version from

LM Technologies website (LM540 Driver) and install it directly.

• Double click setup.exe to start installation

• Choose the setup language to use from the drop down box

Summary of content (6 pages)

PAGE 1
LM540 Class 1 Bluetooth USB Adapter Quick Guide 1. System Requirements At least 50MB of free disk space is required; Windows 7, Windows Vista or Windows XP operating systems are supported. 2. BlueSoleil Installation 2.1 Before installing Uninstall any previous versions of BlueSoleil installed on your computer before installing this version. • • • Click Start -> Control Panel to open Control Panel Choose Add or Remove Programs. Select BlueSoleil from the program list and uninstall it.
PAGE 2
• Follow the instructions on the screen • Restart your computer Note: If you do not restart your computer after the installation is complete, some functions of the software may not be available or may work abnormally. 3. Getting Started 3.1 Plug in LM540 Plug in LM540 to the USB port of the PC. The license key for BlueSoleil is programmed in the LM540 hardware. So when you start the Bluesoleil software, the license key will be automatically detected.
PAGE 3
.2 Starting BlueSoleil When BlueSoleil starts and the LM540 is plugged in the PC, a notification message will appear in the system tray as shown below and the system tray Bluetooth icon will turn to BLUE Double click “Bluetooth Places” icon on the desktop system tray and select “Explore Bluetooth Places”. or right-click the Bluetooth icon in the 3.3 Search remote Bluetooth Devices • • Make sure the device(s) are set discoverable. Double-click Search Devices icon.
PAGE 4
In this case, a connection to a Serial Device is initiated. Once the pairing and connection is successful, the following message will appear in the system tray. The Bluetooth Icon in the system tray will also turn GREEN 3.6 Terminate a connection • Right-click the connected remote service icon and select Disconnect. On disconnection, the bluetooth icon in system tray will again turn BLUE. 4. Uninstalling BlueSoleil BlueSoleil can only be removed by using the Control Panel.
PAGE 5
Statement from IVT Corporation, owners of BlueSoleil Users within MAC ID range from 00:15:83:45:B2:C2 to 00:15:83:45:BC:85 can upgrade to BlueSoleil 8 from BlueSoleil 6, please download the version package from http://www.bluesoleil.com/products/SoftwareDetail.
PAGE 6
Product: LM540 Part No: 540-0542 Datasheet Rev 1.2/07-11-13 6 FCC Warning Statement This device complies with Part 15 and 15C of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 and 15C of the FCC Rules.