User's Manual

ManualsBrandsLM Technologies ManualsElectronicsLM410 BLUETOOTH CLASS 1 MODULE WITH SMA ANTENNA

LM410

Page 1 of 9

+44(0) 207 428 2647 www.lm-technologies.com | sales@lm-technologies.com

LM410 Class 1 Bluetooth SPP Plug n Play Module

External SMA Antenna, 2x10 pin connector

Product: LM410

Part No: 410-0200 for BT2.0 F/W

Datasheet Rev1.1/13-11-13

1 General Description

The LM410 is Class 1 Bluetooth2.0 + EDR module with external SMA connector. The Bluetooth funcon is based on CSR

BlueCore 04 chipset which implements full speed Class 1 bluetooth operaon with a support of upto 3 simultaneous

connecons while running full Bluetooth stack in the module. The interface to the host system is UART. This module is

suitable for serial port applicaon which require 100-600 m range (depending on the antenna) and comes with

Bluetooth 2.0+EDR compliant SPP ﬁrmware.

The default ﬁrmware is mulconnecon ﬁrmware v7.xx series and supports up to 3 simultaneous connecons

Boom View

Top View

Side View

Summary of content (9 pages)

PAGE 1
LM410 Class 1 Bluetooth SPP Plug n Play Module External SMA Antenna, 2x10 pin connector Bottom View Product: LM410 Part No: 410-0200 for BT2.0 F/W Datasheet Rev1.1/13-11-13 Top View Side View 1 General Description The LM410 is Class 1 Bluetooth2.0 + EDR module with external SMA connector. The Bluetooth function is based on CSR BlueCore 04 chipset which implements full speed Class 1 bluetooth operation with a support of upto 3 simultaneous connections while running full Bluetooth stack in the module.
PAGE 2
Features Product: LM410 Part No: 410-0200 for BT2.0 F/W Datasheet Rev1.1/13-11-13 • Used in LM Technologies Ltd Bluetooth Ethernet access point (LM300) • CSR BlueCore4 chipset • Bluetooth 2.
PAGE 3
5 Product: LM410 Part No: 410-0200 for BT2.0 F/W Datasheet Rev1.1/13-11-13 Electrical Characteristics Absolute Maximum Rating Parameter Min Max Unit Storage Temperature -40 +85 °C Supply Voltage (VDD) +2.7 +3.6 DCV Supply Voltage (PVCC) +3.0 +3.3 DCV VDD + 0.4 DCV All other pins VSS-0.4 Recommended Operating Conditions Parameter Min Max Unit Storage Temperature -10 +70 °C Supply Voltage(VDD) +3.0 +3.6 DCV Supply Voltage (PVCC) +3.0 +3.
PAGE 4
6 Product: LM410 Part No: 410-0200 for BT2.0 F/W Datasheet Rev1.1/13-11-13 Pin Assignments Pin Definition for Header J2 LM410 Page 4 of 9 VDD TXD RXD 1 2 3 SPICSB 4 RSTL PIO5 SPIMOSI SPICLK 5 6 7 8 DTR GND 9 10 Pin No Pin name Direction Description Signal Level 1 VDD Input DC Input (3 ~ 3.
PAGE 5
Product: LM410 Part No: 410-0200 for BT2.0 F/W Datasheet Rev1.
PAGE 6
PIO2 PIO3 PIO4 PIO5 PIO6 PIO7 PIO8 PIO9 23 24 25 GND2 18 GND1 10 GND0 1 UART_CTS UART_RTS UART_TX UART_RX PIO11 SPIMISO SPICLK SPICSB SPIMOSI 16 LM072 RESET UART_CTS UART_RTS UART_OUT UART_IN 30 28 27 26 22 21 20 UART_DTR SPIMISO SPICLK SPICSB SPIMOSI L0402 C2 1P5 C0402 3V3 1 RESET_L 6 5 4 3 2 1 6 way J4 UART_IN UART_OUT 8 9 P41 SPICLK P120 UART_DTR 8 PIO9 PIO8 P27 P140 10 9 7 PIO6 P26 6 5 4 3 2 1 FLMD0 SPIMISO UART_CTS PIO7 P24 P25 PIO2 PIO3 UART_RTS P23
PAGE 7
Product: LM410 Part No: 410-0200 for BT2.0 F/W Datasheet Rev1.
PAGE 8
This device complies with the following radio frequency and safety standards. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 9
may depend on the details of how the module is integrated with the host, ASK PROXIMA CO., LIMITED shall provide guidance to the host manufacturer for compliance with the Part 15B requirements. Note 5: FCC ID label on the final system must be labeled with “Contains FCC ID: VVXLM410” or “Contains transmitter module FCC ID: VVXLM410”.