Mobile PERS (Personal Emergency Response System) Included In This Package: •LifeBeacon™ Mobile PERS Device •Black Rubber Wrist Band •Plastic Pendant‐Conversion Inserts and Post‐Removal Tool •UL‐listed AC Charging Cradle •GSM Enabled SIM Card •Two 3.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Initial Charging of LifeBeacon™ A 1. Remove LifeBeacon™, Charging Cradle and A/C Power Adaptor from Box DO NOT TURN ON THE LIFEBEACON™ YET! 2. Plug A/C Adaptor into the Charging Cradle and A/C Power Source. 3. Make sure the LifeBeacon ™ is Correctly Positioned in the Charging Cradle with the watch facing front, the SOS Button facing up and the Charging Contacts facing bottom.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Initial Power Up of LifeBeacon™ B C 1. Take the fully charged LifeBeacon™ outside under open sky 2. Press and hold the power button on the lower left side of the LifeBeacon™ for at least 3 seconds 3. You will hear a distinctive musical chime and an audible message saying “GPS signal …………………………..” The watch face will display the word “searching” and the audio message will repeat until Satellite location is determined 4.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Initial Test of LifeBeacon™ B C 1. When testing the LifeBeacon™ , press and hold the SOS Button located on the left side for 3 seconds 2. Your will hear an audible message say “SOS alert activated, please wait while we contact emergency assistance” and a message that says “SOS Activated” will appear on the screen while you wait for the operator to connect to the LifeBeacon™ 3.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ B D Normal Operation and Charging of LifeBeacon™ 1. During normal every day wear, the LifeBeacon™ operates as a digital watch which will display the time and date 2. The LifeBeacon™ battery can last up to 48 hours but should be charged on a daily basis (suggested during sleep) to ensure functionality when being worn 3.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Emergency Activation of LifeBeacon™ B F C 1. When activating the LifeBeacon™ for emergency assistance, press and hold the SOS Button located on the left side for 3 seconds 2. Your will hear an audible message say “SOS alert activated, please wait while we contact emergency assistance” and the watch face will display “SOS Activation” . At the same time, a message will be sent to your emergency contacts informing them of your alert.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Accidental Activation of LifeBeacon™ G False alarms result if you accidentally activate your LifeBeacon™ as if it were a real medical emergency. 1. If you accidentally activate your LifeBeacon™ remain calm and avoid panic 2. The LifeBeacon™ will connect to the operator as if it were an emergency. 3.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Wearing LifeBeacon™ (Pendant) B H The LifeBeacon™ easily attaches to the included lanyard to be worn as a pendant around the neck. 1. 2. I C Attach the included lanyard to the LifeBeacon™ by slipping the lanyard loop through the opening located at the top of the LifeBeacon™. Simply place the lanyard around the neck to wear the LifeBeacon™ as a pendant.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Continued Wearing of LifeBeacon™ (Watch) 3. Firmly press the Post Removal Tool through the slot openings to push out the posts 4. Remove the Plastic Blanks located at the top and bottom of the LifeBeacon™ please keep the plastic blanks in order to reinstall for the purpose of wearing LifeBeacon™ as a pendant in the future if need be. 5.
Please Follow Instructions Below For Proper Operation of LifeBeacon™ Changing Battery of LifeBeacon™ J If LifeBeacon ™ battery dies and recharging is not feasible, an extra battery has been provided for such a situation. It is recommended that you be assisted by a loved one or care giver to change the battery. You can charge the included extra battery by placing it in the charging receptacle located on the top of the charging cradle 1. 2. 3. 4. 5. 6. 7. 8.
Important Things to Know About LifeBeacon™ K 1. LifeBeacon™ operates like a cellular phone. The strength of the cellular signal will fluctuate depending on its location. LifeBeacon™ must have adequate cellular signal in order to function properly. Try and remain in areas of adequate cellular signal while wearing the LifeBeacon™. There is a cellular signal strength indicator in the upper right corner of the watch screen outlined below: S S = signal = no signal 2.
Additional Technical Information L 1. GPS coordinate information is sent to the monitoring center via GPRS and/or SMS. 2. Emergency calls are made through GSM voice mode. 3. The LifeBeacon™ can only initiate and receive voice calls to and from the Monitoring Center. 4. GPS coordinates can only be transmitted to the Tracking Information Center (either by GPRS or SMS). 5. The Tracking Information Center can change the frequency of GPS coordinate and location reporting .
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.