User's Manual

ManualsBrandsLiveFree Emergency Response ManualsElectronicsEZ Watch

UserManual

UserOperation

1. MakeSOSemergencycall:

1. atstandbymode,pressSOSbuttonwillcalltopresetSOSnumbers.

2. thecallisloopcall:itwillcalltofirstnumber,ifnoanswerornotavailablethencalltosecondnumber,

ifstillnoanswerornotavailable,then

thethirdnumber...(upto10groupnumberatmost);ifallno

anwerornotavailable,thencallfirstnumberagain,thensecondnumber...;untilsomebodyanswerthe

call.Anynumber’sanswerwillstoploopcall.

3. IfonlysetuponegroupSOSnumber,thedevicewillkeep

calltoit,untilthisnumberanswerthecall.



2. CancelthecurrentSOSemergencycall

1. Atcallingstatus,userlongpress3secondsSOSbuttononthedevicewillcancelthecurrentSOScalling.

2. RFbuttondon’thavethisfunction.



3. Hungup:

1. Theotherside

hungupthecallingthenourdevicewillautomaticallyhungup.

2. Orlongpress3secondstohungupthecallingorcancelaphonecalling.



4. Fix‐time‐callfunctionon/off:switchbuttoncanturnon/offtheFix‐time‐callfunction.



setting

1. SetSOSphonenumber

1.1 Settingmethod:*0#number1*extensionnumber#number2*extensionnumber##

1.2 Description:

1.2.1 *0#meanssetSOSnumbers

1.2.2 Ifthenumberhaveextensionnumber,use*todivided;ifnoextensionnumberthenno*

1.2.3 SOSnumbercanbeonegroupormore(canbe10group),use#

todivideeachgroup

1.2.4 Afterfinishfinalgroupsetting,itneedinputonemore#;means“##”attheend

1.2.5 Eachnewsettingwillautomaticallydeleteoldpresetnumbers.



2. Setfix‐time‐callphonenumber

2.1 Settingmethod:*1#*number1*extensionnumber#number2*extensionnumber##

2.2 Description:

2.2.1 *1#meanssetfixtime

callnumber;

2.2.2 Ifthenumberhaveextensionnumber,use*todivided;ifnoextensionnumberthenno*

2.2.3 Thenumbercanbeonegroupormore;use#todivideeachgroup

2.2.4 Afterfinishfinalgroupsetting,itneedinputonemore#;means“##”at

theend

2.2.5 Eachnewsettingwillautomaticallydeleteoldpresetnumbers.

2.2.6 Thecallissilencecallfor10secondsthenhungup.



3. Calibratetelephonetime

3.1 Settingmethod:*2#HHMMSS#

3.2 Description:

Summary of content (3 pages)

PAGE 1
User Manual User Operation 1. Make SOS emergency call : 1. at standby mode, press SOS button will call to preset SOS numbers. 2. the call is loop call : it will call to first number, if no answer or not available then call to second number, if still no answer or not available, then the third number... (upto 10 group number at most) ; if all no anwer or not available, then call first number again, then second number... ; until somebody answer the call. Any number’s answer will stop loop call. 3.
PAGE 2
3.2.1 *2# means to set current time to calibrate telephone time 3.2.2 HH means hour (24 hours format); MM means minutes; SS means second 3.2.3 Each new setting will automatically delete old preset time. 4. Set the fix time to call 4.1 Setting method: *3#HHMM# 4.2 Description: 4.2.1 *3# means set the fix time to call 4.2.2 HH means hour (24 hours format); MM means minutes; SS means second 4.2.3 Each new setting will automatically delete old preset time. 5.
PAGE 3
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.