Quick Start Guide

QUICK START GUIDE
studio
THANK YOU for purchasing the LitraStudio!
LitraStudio™ is the World’s Most Powerful and Portable RGBWW Photo and Video Light. With over a million
unique colors available anytime, anywhere, the LitraStudio™ allows you to light your world in a whole new
way, no cords attached.
PARTS
1. Optical Lens
2. USB C Charging Door / Port
3. Control Panel
4. Battery Door
5. ¼ 20 Mount
6.Pressure Valve
7. Aluminum Housing
8. Rechargeable Quick Swap Battery
9. Silicone Diffuser
10. Quick Charge Adapter
11. ¼ 20 Handle
12. Carry Bag
WARNING
0.1m
0.1m
1.
7.
4.
7.
6.
4.
5.
8.
9.
10.
11.
12.
2.
3.
SETUP
CONTROL PANEL MENU
1. Remove contents from box and remove protective film from
lens and control panel.
2. Charge light to 100% before use.
3. For manual use, power light on and start creating!
4. For Bluetooth control, download Litra App to smartphone
device.
4. Power on light.
5. Make sure the Bluetooth on your device is on.
6. Connect to LitraStudio and start creating!
7. To upgrade the LitraStudio software, connect to light, select
“Settings,” select “Firmware Update.”
8. See FAQs, App Tutorial, and Troubleshooting Guide for
additional information.
9. Contact [e-mail] if needed.
10. Register your product at Litra.com
CONTROL PANEL BASICS
1.
2.
3.
4.
5.
6.
7.
CCT
95%
80%
5600k
20GN
8.
9.
10.
11.
12.
1. Home Button
2. Back Button
3. Dimming/Intensity, Select,
Overdrive Control
4. CCT, Hue, Flash Control
5. Green Shift, Saturation Control
6. Program Button
7. Power Button
8. Mode
9. Intensity
10. Kelvin / HUE / Mode Dependent
11. Battery Level
12. Mode Dependent
1
Home Menu Mode
Notes
Light Mode
Light Effects
DMX
Factory Reset
CCT
HIS
Gel
RGBWW
OD > Press and Hold Dim/Select
Flash > Press and Hold CCT/HUE
Various customizable parameters
for each effect
Light Info
Assigned Band Protocols:
1-50 CCT
51-100 HSI
101-150 GEL
151-200 RGBWW
Select DMX Mode > DMX Mode Active.
Requires separate DMX Dongle accessory
not included wit the basic LitraStudio
Light Temp
Serial Number
Firmware Version
Will delete saved presets and reset
Bluetooth connection
Details / Special Controls
DIM / Select
CCT / HUE
Home
Back
“P” Program
Flash
Press and hold for Overdrive ON/OFF
Press and Hold for Flash ON/OFF
Top level Menu / Back to Past Menu Location
Back on level in Menu
Short Press to bring up saved settings. Long Press to save current
setting
Press and hold CCT/HUE control. Requires separate PC to USB
cable accessory not included with the basic LitraStudio