Cut Sheet

LBR
4"-8" OPEN
Retrot Downlight
FEATURES & SPECIFICATIONS
INTENDED USE — Typical applications include corridors, lobbies, conference rooms and private oces.
CONSTRUCTION — Retrot, remodel, and new construction mounting types. See table for compatible
ceiling openings and thickness range.
Optional goof rings available for additional overlap trim coverage.
1/2"-1-1/2" ceiling thickness
25° ambient temperature
IC rated up to 1000lm
OPTICS — 55° cuto
New construction frame accessories approved for 8 (4 in/4 out) No. 12 AWG conductors rated for
90°C through wiring.
1.0 S/MH standard (wallwash reector available)
80CRI standard (90CRI optional)
ELECTRICAL — Adjustable lumen output with three module options. Fixed lumen options also available.
MVOLT 120/277V 50/60Hz driver (0-10V & 120V Phase Dimming to 10% min dimming level)
100LPW typical
FCC CFR Title 47 Part 15 Class A for lower lumen range. FCC CFR Title 47 Part 15 Class B for higher lumen
range.
L80 at 60,000 hours
3 SDCM
LISTINGS — Certied to US and Canadian safety standards. Damp location standard (Wet location,
covered ceiling optional). Some congurations are ENERGY STAR® certied, please visit www.energystar.
gov for specic products. TAA compliant.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
Note: Actual performance may dier as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
ORDERING INFORMATION
Example: LBR6 ALO2 SWW1 AR LSS MWD MVOLT UGZ 90CRI
Lead times will vary depending on options selected. Consult with your sales representative.
Series Lumens
1
Color temperature
1
Reector Color Reector Flange Reector Finish
LBR4 4" Retrot
LBR6 6" Retrot
LBR8 8" Retrot
LBR4WW 4" Retrot Wallwash
LBR6WW 6" Retrot Wallwash
LBR8WW 8" Retrot Wallwash
Adjustable Lumen Output
ALO1 500/750/1000lm
ALO2 1000/1500/2000lm
ALO3 2000/2500/3000lm
Fixed Lumen Output
05LM 500lm
07LM 750lm
10LM 1000lm
15LM 1500lm
20LM 2000lm
25LM 2500lm
30LM 3000lm
Switchable CCT
SWW1 3000K-3500K-4000K-5000K
Fixed CCT
30K 3000K
35K 3500K
40K 4000K
50K 5000K
AR Clear
WR
2
White painted
BR
2
Black painted
(blank) Self-anged
TRW
3
White painted
ange
TRBL
4
Black painted
ange
LSS Semi-specular
Distribution Voltage Driver Options
MWD Medium wide
(1.0 s/mh)
WW
5
Wallwash
MVOLT 120V - 277V UGZ Universal dimming to 10%
0-10V; line voltage dimming (120V)
DALI
6
DALI dimming to 1%
90CRI High CRI (90+)
AT
7
Airtight
E10WCPR
8
Batterypack (10W constant power)
T20 Compliant remote test switch
ELR
8
Batterypack (10W constant power) Non-T20
Compliant remote test switch
EC1
9
Extended Conduit (18")
EC6
9
Extended Conduit (6ft)
WL
7
Wet Location
QDS
10
Quick disconnect plugs
Notes
1 Fixed CCT and lumens must be specied together (for example: 10LM 30K).
2 Not available with reector nish.
3 For use with Clear (AR) reector nish only. Not applicable with WR (white reector).
4 For use with Clear (AR) reector nish only. Not applicable with BR (Black reector).
5 Only available with WW Series (for example LBR4WW).
6 Not available with Fixed CCT and lumens.
7 Not available with wallwash (WW).
8 Top acess installation or 17.5" plenum clearance required for roomside installation
9 Not available with QDS, ELR and E10WCPR.
10 QDS not available with emergency batterypacks.
11 Field installed. Top access installation required.
Catalog
Number
Notes
Type
D
I
M
M
A
B
L
E
A+ Capable options indicated
by this color background.
battery pack
DOWNLIGHTING LBR