User MANUAL 802.11b/g/n 2Tx2R + BT5.
CONTENT PRODUCT FEATURES ....................................................................................................................7 BT FEATURE: .........................................................................................................................................7 WI-FI FEATURE:.....................................................................................................................................7 PRODUCT SPECIFICATIONS...............................................
Page 3/15
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
20 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document. LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above instructions.
PRODUCT FEATURES BT FEATURE: Bluetooth V5.0 system Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1, 3.0+HS and 4.0LE Bluetooth Class I transmission power Support all packet types in basic rate and enhance data rate Support Secure Simple Pairing Support multiple low energy states Fast AGC control to improve receiving dynamic range Support Wake On Bluetooth WI-FI FEATURE: Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g, 802.
PRODUCT SPECIFICATIONS MAIN CHIPSET Realtek RTL8725A FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V5.0LE Bus Interface USB2.0 Data Rate 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power +4 ≤ Output Power ≤ +10dBm; Class I Device Receiver Sensitivity < 0.1% BER at -88dBm Wi-Fi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n. Bus Interface USB2.0 Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.
MCS7(HT20/40MHz) < -28dB MCS0(VHT20/40/80MHz) < -5dB MCS7(VHT 20/40/80MHz) < -27dB 2.4GHz -20ppm < Center Frequency < +20ppm Frequency Offset Transmit Output Power - single chain @ant; Tolerance: ±1.5dBm@2.4GHz 802.11b Tgtpwr (dBm) 1Mbps 17 2Mbps 17 5.5Mbps 17 11Mbps 17 802.11g Tgtpwr (dBm) 6~24Mbps 17 36Mbps 16 48Mbps 16 54Mbps 16 802.11n HT20 Tgtpwr (dBm) 802.
Mode Power Consumption Antenna Type TX RX Unassociated Idle Standby for Wake up mode Average 442mA 185mA 31mA Peak 829mA 796mA 37mA 2x Metal Antennas for WiF; 1x U.
RECOMMENDED OPERATION CONDITIONS Symbol Rating +5VCC VDD33_USB VA33X VR33_SYN VR33_RTX_S0 VR33_RTX_S1 BT_BD33PA VD33_SPS VA10_AFE VA10_SYN VR10_RTX_S0 VR10_RTX_S1 VD10D VA10_USB VDD12BT BT_VD12RTXBB BT_BD12RTXFE BT_VD12SYN Min Typ Max Units 5V Supply Voltage 4.5 5 5.5 V 3.3V Supply Voltage 3.0 3.3 3.6 V 1.05V Core Supply Voltage 1.15 1.25 1.37 V 1.2V Supply Voltage 1.08 1.2 1.32 V Min Typ Max Units DC CHARACTERISTICS Symbol Parameter VIL Input Low Voltage - 0 0.
PIN ASSIGMENT Pin.
MECHANICAL Weight: 3.
I-PEX CONNECTOR SPEC Page 14/15
MODULE PHOTO Front Side Bottom Side EEPROM INFORMATION WI-FI/BT Reg Domain World Wide 2.