User manual < WM6687> Dual-Band 802.11ac 4x4 MIMO PCI Express Mini Card Wireless Network Adapter LITE-ON Version: 1.0.0 This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
Product Specification of WM882 Content Page 1 Product Description …………………………………………. 4 2 Application …………………………………………. 4 3 Features …………………………………………. 4 4 Product Specifications …………………………………………. 5 5 Pin Definition ………….…..……………….…………. 5 6 Physical & Environment 7 6.1 PCB Dimension ………………………… 6 6.2 Operation Temperature & Humidity …………………..….. 6 6.3 Storage Temperature & Humidity 6 Certification Requirements ……………..…. ……….…..……………….…………. 2 / 14 Rev.:1.0.
Product Specification of WM882 Change History Version Revised Date Editor 1.0.0 2016/12/15 Flora Yu 3 / 14 Content Revised First Edition (baseline) Rev.:1.0.
Product Specification of WM882 1 Product Descriptions The WM6687 provides ultra-high performance transmission rate in the 2.4G or 5GHz band. It is backward compatible with the current 802.11a/b/g/n network devices. 2 Application Home and/or office wireless networking Wireless multimedia Wireless extension of existing wired network 3 Features IEEE 802.11 a/b/g/n/ac standard compliant 4x4 MIMO wireless system Ultra-high data rate up to 1.
Product Specification of WM882 802.11b: CCK(11&5.5 Mbps), DQPSK (2Mbps), DBPSK (1Mbps), 802.
Product Specification of WM882 14 NC 40 GND 15 GND 41 VDD3_3 16 NC 42 NC 17 NC 43 GND 18 GND 44 LED_WLAN 19 NC 45 NC 20 RF_DISABLE_L 46 NC 21 GND 47 NC 22 PCIE_PERST_L 48 NC 23 TDP 49 NC 24 VDD3_3 50 GND 25 TDN 51 NC 26 GND 52 VDD3_3 6 Physical & Environment 6.1 PCB Dimension: - Standard mPCIe form factor: 30 × 50.95 mm (width × length) 6.2 Operation Temperature & Humidity - Temperature：32℉ to 113℉ (0 ℃ to 45 ℃) Humidity：10% ~ 90% R.H. 6.
Product Specification of WM882 - USA (DFS) Canada (IC) Japan (TELEC) Note, cert for module slave mode only, system products with/after the module installed/embedded need to re-cert and under customer’s expense. 7 / 14 Rev.:1.0.
Product Specification of WM882 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification of WM882 IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used.
Product Specification of WM882 Antenna list: Set Brand Model Name (P/N) Antenna Type 1 PSA RFDPA171300SBLB802 Dipole Antenna 2 ethertronics M830520 Ceramic Antenna Connector Gain (dBi) Remark Reversed-SMA Note 1 N/A Note 1 Connect with Black Cable or Grey Cable Note 1: Gain (dBi) Set Cable loss True Gain (dBi) 2.4GHz 5GHz 2.4GHz 5GHz 2.4GHz 5GHz 1 4.03 5.4 0.5 0.5 3.53 4.9 1.2 2.2 -0.1 1 2 1.1 3.2 0.5 0.9 0.6 2.
Product Specification of WM882 This radio transmitter (IC: 4491A-WM6687) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Product Specification of WM882 The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Product Specification of WM882 IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 25 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
Product Specification of WM882 Japan Statement: 5GHz band (W52, W53): Indoor use only 14 / 14 Rev.:1.0.
