BMH-10x Bluetooth® Headset
Congratulations ............................................................3 Package Contents .......................................................3 Headset Features ........................................................4 Charging the internal battery ...................................5 Switching the headset on or off...............................6 Pairing Procedure........................................................6 Phone call use ..............................................................
Certification and safety approvals/general information Service and Repair ...................................................12 Safety and General Information ............................
Congratulations Congratulations on your purchase of the BMH-10x Bluetooth® headset. This headset allows you to communicate wirelessly through your mobile phone and includes a built-in microphone and earphone. It uses Bluetooth® 1.2 technology, but is also compatible with mobile phones using Bluetooth® version 1.1 technology. Your BMH-10x Bluetooth® headset uses a built-in Lithium Polymer rechargeable battery, which gives long life to weight ratio.
Headset Features The headset can be worn on either ear. Just clip the ear hook onto the preferred side.
Charging the internal battery Before using your headset, please charge the internal battery. To charge the battery: 1. Connect the AC adaptor to an electrical outlet. 2. Plug the adaptor’s connector into the charging port (see below). 3. While charging, the blue LED light will stay on. When charging is complete, the LED will switch off. You can then unplug the adaptor's connector from the headset and disconnect the adaptor from the electrical outlet. 4. Charging time is about 2 hours.
Switching the headset on or off To switch on: Press and hold the talk key for 3 seconds until the blue LED turns on. To switch off: Press and hold the talk key for 3 seconds until the orange LED flashes. Pairing Procedure Your BMH-10x Bluetooth® headset needs to be paired to your mobile phone before it can be used. This is a two part process; one part is carried out on the headset and the other is carried out on the mobile phone.
Making a call from the mobile phone While your mobile phone is paired with your headset, you can use the mobile phone to make phone calls in the same way as normal. The only difference will be that the earphone and microphone functions of the headset will be used instead of the phone’s. Voice dialing through the headset In order to use the voice dial feature of your headset, your phone must support voice dialing and must have voice tags stored. To use voice dialing: 1.
receive a second call, you can put the first caller on hold while you speak to the second caller. If your phone supports this feature: 1. Press the increase volume key for 3 seconds to put the first caller on hold and answer the second call 2. When the second call has ended, the first caller will automatically be taken off hold. Ending a call During a call, press the talk key for 3 seconds to hang up. If the other person hangs up first, then the call will end automatically.
LED indications When you turn the headset on, the LED will indicate the battery status. • If the blue LED stays on solidly for 5 seconds, then the battery is sufficiently charged • If the orange LED stays on solidly for 5 seconds, the battery needs to be recharged. During normal use, if you see the orange LED flashing every 30 seconds, please recharge the battery as soon as possible. Bluetooth® headset specification Compatible with Bluetooth® Ver.1.1 or 1.
Cautions 1. Always store the headset safely. 2. Avoid storage at temperatures below -25°C or above 70°C. (Storage at high or low temperatures can degrade performance and reduce battery life.) 3. Avoid operating at temperatures below -10°C or above 50°C. 4. Do not expose the headset or any of its supplied parts to rain or other liquids. 5. Avoid humidity below 10% RH or above 95% RH.
Certification and safety approvals/general information This product is CE, FCC, BQB marked. Please note that this product uses radio frequency bands not available for use within some areas of the EU. This product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Users are not permitted to make changes or modify the device in any way.
Service and Repair Battery: This headset is equipped with a Li-poly rechargeable battery. Replacement or service must be carried out at a qualified service center or returned to the manufacturer. Charger: Use only the supplied and approved AC charger.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that maycause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
