user manual version 1, 20120627 http://www.electricimp.
electric imp, inc What is Electric Imp? Electric Imp is a service that connects devices to the internet, allowing them to communicate with each other and also with users via their smartphone or computer. The imp card is the communication link between the device and the Electric Imp service. What do I need to get started? • An imp-enabled device • An iOS device (iPhone, iPod touch, or iPad) running iOS 4.0 or later, or an Android device running Android 2.
electric imp, inc How do I get started? Step 1: Installation If the device the card is going into is AC powered, disconnect it from power before installing the card. If it is battery operated, remove the batteries before card installation. Insert the imp card into the imp-enabled device, with the contact end going in first. The card will only go in one way up, so if it doesn’t slide in easily, try the other way up.
electric imp, inc Step 2: Wi-Fi setup Wi-Fi setup is performed using a smartphone or tablet, and the free Electric Imp application. Using your iOS or Android device, search for “Electric Imp” in the app store (Apple iTunes or Google Play). Download and install the app, then start it. You will be prompted for an email address and password; if you already have an Electric Imp account, enter your details here otherwise use the “new account” button to create one.
electric imp, inc Configuration with WPS PIN (Wi-Fi Protected Setup) If your router has WPS but no button, you can use the WPS PIN function to configure Wi-Fi. Often the WPS PIN will be listed on a sticker on the underside of the router. Enter this PIN into the app, then press the WPS PIN setup button in the app to start the transmission. Configuration with a network name and password For this, you need to know you Wi-Fi network name (sometimes called “SSID”) and password.
electric imp, inc Step 3: Connect everything Once your imp card is connected to the service, you can then access it using the Electric Imp app on your phone/ tablet, or go to http://www.electricimp.com/ in your browser to configure and control your imp-enabled devices.
electric imp, inc Troubleshooting: LED flash codes The indicator on the back of the imp card flashes to indicate the status of the connection. If the card connects successfully, the indicator on the card will flash green slowly then turn off after about 60 seconds.
electric imp, inc Specifications Control and sense devices using the Electric Imp service Interface: Six software-configurable pins Input power: 3.3v +/- 5% nominal, 400mA maximum Dimensions: 32mm x 24mm x 2.1mm Weight: 0.1oz Wireless: Wi-Fi. 802.
electric imp, inc SAR limits for Wi-Fi are 1.6 watts per kilogram (W/kg) for the FCC and IC, and 2.0W/kg for the Council of the European Union. The imp has been tested and meets the FCC, IC and European Union RF exposure guidelines for Wi-Fi operation. During SAR testing, the imp’s radio is set to transmit at the highest power level. The SAR levels experienced during normal use may be lower than the maximum SAR levels.
electric imp, inc Devices that incorporate an imp slot must ensure that all surfaces of the imp card (top, bottom, rear) are kept at least 11mm away from the user’s body to ensure exposure levels remain at or below the maximum levels. Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC).