Installation Guide

LITA Artificial Grass - Artificial Grass Installation

(Please follow the steps below)

Here is the list of steps you must take while Laying Artificial Grass. Not only

will these steps show you how to install artificial grass, but there is a list of

precautions you must take during the whole process.

1. Pre-Installation

In this first step, you must assess which tools and materials are required to

install artificial grass i.e., cutter, nails, glue, and joins.

Then you have to check whether there is any underground electric wire or

water pipe passing on the area where you are going to install artificial turf. If

there are any hurdles, then it is recommended to move them away so that

there is no risk of electric shock or water leakage while installing turf.

It will be convenient in the future if they require any maintenance. The

recommended practice is to get the exact measurement of the area in

advance so that appropriate turf sizes can be arranged, which results in less

amount of cutting and neat look.

2. Area Preparation

This article is about how to install artificial grass, and most of the people are

going to take help during their lawn or yard DIY Project.

In this step, you must prepare the area, making it suitable for artificial grass

on it. So first, you have to remove any existing grass in the area along with

roots, so it’s recommended to remove 2-4″ of the surface to prevent grass or

weed regrow.

Then you have to add the base of around 2-4″ recommended by your turf

manufacturer. If you are laying on good water absorbent surface, then you

should proceed to the next step. Otherwise, you have to create a slight slope

of base material to ensure good drainage of water.

PAGE 1
LITA Artificial Grass - Artificial Grass Installation (Please follow the steps below) Here is the list of steps you must take while Laying Artificial Grass. Not only will these steps show you how to install artificial grass, but there is a list of precautions you must take during the whole process. 1. Pre-Installation In this first step, you must assess which tools and materials are required to install artificial grass i.e., cutter, nails, glue, and joins.
PAGE 2
¾” Pile Height – 2” Base 1-3/8” Pile Height – 2” Base 1-5/8” Pile Height – 2” Base 3. Lay Artificial Turf Now it’s time to lay your artificial grass rolls. Tools like carpet kickers can come handy in this phase. If you are using different rolls, then make sure pile direction is facing the same way, and if you are using four tone grass, then place your rolls accordingly. Spread and stretch the grass that covers each inch of your area and some extra grass over the edges.
PAGE 3
Now it’s time to secure the edges. Turf Nails and staples are mostly used to pin down the outside border of turf. For turf durability, the recommended practice is to pin the nails at the distance of 6″ apart from one another. 7. Spread Infill Some artificial grass doesn’t require infill, but most of them require infill to gives grass strength and helps to maintain blade condition in heavy usage area. There are different types of infills available.