MSDS

ManualsBrandsLiquid Nails ManualsPaint10 oz. Heavy Duty Construction Adhesive

LN-903 HEAVY DUTY ADHESIVE

PPG Architectural Finishes, Inc.

15885 West Sprague Road

Strongsville, OH 44136

U.S.A.

2013-10-24.

Material Safety Data Sheet

Product name

Manufacturer

Validation date

Print date

In case of emergency

Product and company identification

Responsible name

LN-903 HEAVY DUTY ADHESIVE

1 .

1-800-545-2643

Product Stewardship, Regulatory Affairs & Labeling

Signal word

2. Hazards identification

Potential acute health effects

Irritating to respiratory system. May cause sensitization by inhalation.

Irritating to eyes.

Harmful if swallowed.

Irritating to skin. May cause sensitization by skin contact.

Eyes

Skin

Inhalation

Ingestion

Physical state

Liquid.

WARNING!

CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. MAY CAUSE

ALLERGIC RESPIRATORY AND SKIN REACTION. MAY BE HARMFUL IF

SWALLOWED. CONTAINS MATERIAL THAT MAY CAUSE TARGET ORGAN

DAMAGE, BASED ON ANIMAL DATA. CANCER HAZARD - CONTAINS MATERIAL

WHICH CAN CAUSE CANCER.

Potential chronic health effects

Carcinogenicity

Contains material which can cause cancer. Risk of cancer depends on duration and

level of exposure.

Mutagenicity

No known significant effects or critical hazards.

Teratogenicity

No known significant effects or critical hazards.

Developmental effects

No known significant effects or critical hazards.

Chronic effects

Contains material that may cause target organ damage, based on animal data. Once

sensitized, a severe allergic reaction may occur when subsequently exposed to very low

levels.

Fertility effects

No known significant effects or critical hazards.

Over-exposure signs/symptoms

Target organs

Contains material which may cause damage to the following organs: lungs, upper

respiratory tract, skin, eyes, stomach.

Emergency overview

Hazard statements

Precautionary measures

Do not handle until all safety precautions have been read and understood. Obtain

special instructions before use. Do not breathe vapor or mist. Do not ingest. Use only

with adequate ventilation. Do not eat, drink or smoke when using this product. Avoid

contact with eyes, skin and clothing. Keep container tightly closed. Use personal

protective equipment as required. Wash thoroughly after handling.

1/10

2013-10-24.

Summary of content (10 pages)

PAGE 1
Material Safety Data Sheet LN-903 HEAVY DUTY ADHESIVE 1. Product and company identification Product name Manufacturer : LN-903 HEAVY DUTY ADHESIVE : PPG Architectural Finishes, Inc. 15885 West Sprague Road Strongsville, OH 44136 U.S.A. Validation date Print date Responsible name In case of emergency : : : : 2013-10-24. 2013-10-24. Product Stewardship, Regulatory Affairs & Labeling 1-800-545-2643 2. Hazards identification Emergency overview Physical state : Liquid.
PAGE 2
LN-903 HEAVY DUTY ADHESIVE 2. Hazards identification Inhalation : Adverse symptoms may include the following: respiratory tract irritation coughing wheezing and breathing difficulties asthma Ingestion Skin : No specific data. : Adverse symptoms may include the following: irritation redness : Adverse symptoms may include the following: pain or irritation watering redness Eyes See toxicological information (Section 11) 3.
PAGE 3
LN-903 HEAVY DUTY ADHESIVE 5. Fire-fighting measures Special exposure hazards : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.
PAGE 4
LN-903 HEAVY DUTY ADHESIVE 8. Exposure controls/personal protection Ingredient Exposure limits Limestone NIOSH REL (United States, 6/2009). TWA: 5 mg/m³ 10 hour(s). Form: Respirable fraction TWA: 10 mg/m³ 10 hour(s). Form: Total OSHA PEL (United States, 6/2010). TWA: 5 mg/m³ 8 hour(s). Form: Respirable fraction TWA: 15 mg/m³ 8 hour(s). Form: Total dust OSHA PEL 1989 (United States, 3/1989). TWA: 5 mg/m³ 8 hour(s). Form: Respirable fraction TWA: 15 mg/m³ 8 hour(s).
PAGE 5
LN-903 HEAVY DUTY ADHESIVE 8. Exposure controls/personal protection TWA: 10 ppm 8 hour(s). TWA: 30 mg/m³ 8 hour(s). STEL: 20 ppm 15 minute(s). STEL: 60 mg/m³ 15 minute(s). NIOSH REL (United States, 6/2009). CEIL: 4 ppm 15 minute(s). CEIL: 15 mg/m³ 15 minute(s). Formaldehyde Recommended monitoring procedures Engineering measures Hygiene measures Personal protection Respiratory Hands Eyes Skin 2013-10-24. ACGIH TLV (United States, 1/2011). Skin sensitizer.
PAGE 6
LN-903 HEAVY DUTY ADHESIVE 8. Exposure controls/personal protection Environmental exposure controls : Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. 9.
PAGE 7
LN-903 HEAVY DUTY ADHESIVE 11.
PAGE 8
LN-903 HEAVY DUTY ADHESIVE 11. Toxicological information Kaolin ethanol Quartz (SiO2) vinyl acetate Formaldehyde Mutagenicity Conclusion/Summary Teratogenicity Conclusion/Summary Reproductive toxicity Conclusion/Summary A4 A3 A2 A3 A2 1 1 2B 1 - None. + + Proven. Proven. + : Not available. : Not available. : Not available. 12. Ecological information Ecotoxicity Aquatic ecotoxicity : No known significant effects or critical hazards.
PAGE 9
LN-903 HEAVY DUTY ADHESIVE 14. Transport information Regulatory information UN number DOT Classification IMDG Class Proper shipping name Classes PG* Label Additional information Not available. Not available. Not available. - - Not available. Not available. Not available. - - PG* : Packing group 15. Regulatory information U.S. Federal regulations State regulations Massachusetts New York New Jersey Pennsylvania : United States inventory (TSCA 8b): All components are listed or exempted.
PAGE 10
LN-903 HEAVY DUTY ADHESIVE 16. Other information The information contained herein is based on data available at the time of preparation of this data sheet and which PPG Architectural Finishes, Inc. believes to be reliable. However, no warranty is expressed or implied regarding the accuracy of this data. PPG Architectural Finishes, Inc.