User's Manual

ManualsBrandsLiquid Image ManualsElectronicsTorque+ Series Offroad Goggle 369

Products mentioned above or throughout the manual may be trademarks or registered trademarks of their respective

companies.

ATTENTION

This manual explains how to safely operate the Camera Goggle.

Please read these instructions carefully before using the camera.

Keep this manual in a safe place for later reference

Disclaimer

While every effort has been made to ensure that the information contained in the

guide is accurate and complete, no liability can be accepted for any errors or

omissions. Liquid Image Co reserves the right to change the specifications of the

hardware and software described herein at any time without prior notice.

Liquid Image Co declines all responsibility for damages due to improper use of

this product, failure to adhere to the instructions given in this manual, or

modifications to the CAMERA GOGGLE.

Cautions concerning data storage: Stored data may be lost or corrupted. It is

recommended that any important data be copied onto a separate media (such as

a hard disk, DVD-R or CD-R disk). Liquid Image Co makes no warranties and shall

not be held responsible for damages resulting from corrupted or lost data due to a

malfunction of the camera, the software, the memory cards, personal computer,

peripheral devices, or for any losses that result from images that could not be

recorded, are erased, destroyed, or damaged in any way due to a problem or a

mistake while utilizing the camera or any of its accessories.

The Camera Goggle is a sophisticated electronic device and should

be supervised by an adult at all times. This product should not be

used by children under 13 years. This product is not a toy. The inserting

of memory cards, USB cable, and battery must be performed by an

adult 18 years or older who has read and understands this manual. An

adult must always check all water resistant compartments prior to each use.

ENGLISH

ENG-2

1.0 GET TO KNOW YOUR CAMERA GOGGLE

1.1 Features

Video Clips, Still Images, Micro SD/SDHC Card support

Driver free for Windows XP/Vista/7 and Mac 9.x or above

1.2 Specifications -

1.2 System Requirements

Subject to change without notice

Sensor 1/2.5” 5.0MP CMOS Sensor

Image Resolution 12.0 Megapixels (4000x3000)

Lens F/3.2 f=2.75mm (135 Degree FOV)

Focus range .4m to infinity

Internal Memory 256MB NAND Flash Memory for CPU only

External Memory Card Micro SD/SDHC Card supports up to 32GB

Must be Class 6 and above

Video Mode 30FPS@HD 1080P

60FPS@HD 720P (1280x720) with Audio

(1920X1080) with Audio

File Format Picture: JPEG, Video: H.264 MOV with Audio

Status Display LCD Display

PC Interface USB

Power 3.7V Lithium Rechargeable Battery 1150mAh

Auto Of

WiFi - Wireless

f System time 180 seconds

Apps for Android and iOS systems

Operating System

CPU Intel® Core™ 2 Duo CPU E6300 processor

(or above), AMD Athlon 64 X2 3800+ (or above)

RAM 1GB RAM (2GB recommended for editing HD videos)

300 MB available hard disk space

Memory

Graphics Card

256 MB Graphics Card or above is recommendeded

TV Output PAL and NTSC

Quantity of pixels is only an approximate number Approximate frames per second

* **

***

No Software required to download files

Windows® XP (SP2 or higher) ,Vista™,

Windows® 7 or Mac 9.x

ENG-1

4.0 Recording Pictures and Video

4.1 720P Video Mode ENG-10

4.2 1080P Video Mode ENG-10

4.3 Still Image Photo Mode ENG-11

4.4 Continuous Photo Mode ENG-11

4.5 Power Off ENG-11

5.0 Transferring Still Images and Video to a Computer

5.1 Opening Memory Compartment ENG-12

5.2 Connecting and Transferring Files ENG-12

ENG-14

ENG-15

5.3 Disconnecting and Closing Memory Compartment ENG-13

7.0 Video and Image File Size

ENG-15

6.0 Viewing Videos and Still Images on TV

6.1 Setting Correct NTSC/PAL Mode for your TV

6.2 Video and Still Image Playback on a TV

ENG-18

11.0 Replacing Lenses

10.1 Removing the Lens

10.2 Inserting the Lens

10.0 Care and Maintenance ENG-17

8.0 WiFi Capabilites and Use with other WiFi Devices ENG-16

9.0 Firmware and Product Updates ENG-17

12.0 Camera Warnings and Precautions ENG-18

13.0 Battery Warning and Precautions ENG-20

14.0 Commonly Asked Questions and Troubleshooting ENG-20

CONTENTS

1.0 Get to know your CAMERA GOGGLE

1.1 Features ENG-

1.2 Specifications ENG- 2

1.3 System requirements ENG- 2

2.0 Functional Parts

2.1 Included Parts and Accessories ENG- 3

2.2 Part Names - Front View ENG- 4

2.3 Part Names - Back View ENG- 4

2.4 Part Names - Ports and LCD Screen

2.5 Part Names - Battery Compartment

ENG- 5

ENG- 6

2.6 Replace Goggle Strap

ENG- 6

2.7 Replace Face Foam and Rotate Lens

ENG- 7

3.0 Camera Goggle Setup

3.1 Recharging or Replacing the Li-ion Battery ENG- 8

3.2 Inserting Micro SD/SDHC Memory Card ENG- 8

3.3 Setting the Date and Time Mode

ENG- 9

Summary of content (6 pages)

PAGE 1
ENGLISH ATTENTION This manual explains how to safely operate the Camera Goggle. Please read these instructions carefully before using the camera. Keep this manual in a safe place for later reference Disclaimer While every effort has been made to ensure that the information contained in the guide is accurate and complete, no liability can be accepted for any errors or omissions.
PAGE 2
.0 Functional Parts 2.2 Part Names - Front View 2.1 Included Parts and Accessories Please check the contents now (before use) to confirm that it is complete. Contact your Liquid Image Co dealer if anything is missing. USER MANUAL TM CAMERA GOGGLE USB CABLE WARRANTY MICRO FIBER STORAGE BAG RECHARGEABLE LI-ION BATTERY 3.
PAGE 3
2.7 Replace Face Foam and Rotate Camera Lens 3.0 CAMERA GOGGLE SETUP CAUTION: An adult 18 years or older should perform this function. Always make sure the CAMERA GOGGLE is completely dry before performing these steps. Set up should always take place in a clean dry space with a controlled environment. These steps should be performed indoors to avoid exposure to the elements. Unlock Camera Lens by loosening the Hex screw with Allen wrench provided. Rotate lens up to 30 degrees.
PAGE 4
.3 Still Image Photo Mode - RED LIGHT 1. Press and hold POWER/MODE button for 2 seconds to turn on camera. 2. Press the POWER/MODE button 2 times again for less than a second each to change to Photo Mode. Note: the RED MODE LIGHT INDICATOR is on and the GOGGLE is now in the PHOTO READY mode and set to take still images. The LCD screen displays the Camera icon. 3. Press the SHUTTER/SELECT button once. A still image is captured.
PAGE 5
6.2 VIDEO AND STILL IMAGE PLAYBACK ON A TV 1. With the CAMERA GOGGLE turned off, connect the HDMI cable (not included) to the CAMERA GOGGLE and . the HD TV. 2. Turn on the CAMERA GOGGLE and the camera will automatically start up in video mode and begin playing the first video on the TV screen. 3. Press the SHUTTER/SELECT button to advance to the next video and press the POWER/MODE button to go back to the previous video. 4.
PAGE 6
provides basic protection against wind, dirt, dust, snow and glare. The lens will not withstand a severe impact. This lens does not protect against hard or sharp objects. Care should be taken to avoid impact with hard or sharp objects. 3. Avoid jolts, drops, collision with other hard objects, or shaking of the CAMERA GOGGLE. These movements may damage the components. 4. Never open the camera body with a screw driver. There is a risk of shock if you touch the camera components. 5.