Owner's Manual

ManualsBrandsLippert Components ManualsElectronics25351 DSP Amplifier

Table Of Contents

taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20

Taylor Made

Wavemaker Stereo

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0003867

Table of Contents

Introduction ............................................ 1

Safety ................................................... 2

Parts List

................................................ 2

Resources Required ................................... 2

Installation

.............................................. 3

Operation - PC .......................................... 4

Current Settings ....................................... 5

Operation - Android & iOS ............................. 7

Time Delay ............................................ 8

Input Conguration .................................... 8

Wiring Diagrams ..................................... 10

Amplier ............................................. 10

Bridge Mode ......................................... 10

Stereo Mode ......................................... 11

Taylor Made

Wavemaker

Amplier

Installation and

Owner’s Manual

(For Aftermarket Applications)

Introduction

he Taylor Made

Wavemaker amplifier is a 360 watt, four

channel class D fully-integrated amplifier with 31 bands of

equalization. The Wavemaker can be controlled, tuned

and streamed from the available phone app.

When coupled with Taylor Made Exciter speakers, the

Wavemaker can turn the glass into speakers for an

immersive listening experience.

Additional information about this product can be obtained

from lci1.com/support or by using the myLCI app.

Replacement kits can be ordered from https://store.lci1.

com/ or by using the myLCI app.

The myLCI app is available for free on iTunes

for iPhone

and iPad

and also on Google Play

™

for Android

™

users.

iTunes

, iPhone

, and iPad

are registered trademarks of

Apple Inc.

Google Play

™

and Android

™

are trademarks of Google Inc.

Wavemaker AmplifierWavemaker Amplifier

PNPN DescriptionDescription

811752 Wavemaker Amplifier

Summary of content (13 pages)

PAGE 1
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Taylor Made ® Wavemaker Amplifier Installation and Owner’s Manual (For Aftermarket Applications) Table of Contents Wavemaker Amplifier Introduction �� 1 Safety �� 2 Parts List �� 2 Resources Required �� 2 Installation ��
PAGE 2
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Safety Parts List Read and fully understand all instructions before installing or operating this product. Adhere to all safety labels. A This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions.
PAGE 3
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Installation Inside View 1. Select a location to mount the Wavemaker amplifier. It should be mounted to a flat, solid location that is in close proximity to the power source. NOTE: Do not mount near heat sources and make sure there is sufficient air flow around the unit. 2. Mount the amplifier using supplied screws (Fig.1). Pre-drilling holes is recommended. Outside View Fig.1 Fig.2 3.
PAGE 4
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Operation - PC The Wavemaker system is operated by an app available at taylormadeproducts.com/wavemaker. Delay Delay for all channels can be adjusted in a range from 0 to 12.5 in Time (ms) or Distance (mm) (Fig.4). 1. Download and install the app on a PC. 2. Apply power to the amplifier. 3. Go to the Wi-Fi settings on the PC. 4.
PAGE 5
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Master Volume Control WHEN USING EXCITERS, IT IS RECOMMENDED THAT THE HIGH PASS FREQUENCY BE SET TO 80Hz AND THE SLOPE AT 24dB. ANY OTHER SETTING MAY RESULT IN DAMAGE TO THE EXCITERS. The master volume can be adjusted from 0 to -59dB (Fig.5). A Fig.5 B Equalizer Reset Buttons C • Reset All - Restores default settings (Fig. 6A). • Reset EQ - Sets the gain to 0 and the Q and Hz to default (Fig. 6B). Fig.
PAGE 6
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Equalization There are 31 bands of equalization that can be tuned independently or combined (Fig.10). NOTE: The center channel is not supported. Fig.10 Input Configuration Each channel has independent volume, mute, and polarity control (Fig.11). Fig.11 Channel Linking Each channel can be linked by selecting one channel (FL) to control all four channels or two channels (FL/RL) for front and rear channels.
PAGE 7
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Operation - Android & iOS The Wavemaker system is operated by an app available at the Google PlayStore and iTunes. 6. EQ1 is the OEM Factory default setting that was tuned during production, if the system came from an OEM (Fig. 13A). 1. Download and install the app on an Android or iOS device. 7. EQ2 through 8 are flat and can be adjusted. Select one of the EQ buttons to make changes (Fig.13B). 2.
PAGE 8
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Time Delay Input Configuration Delay for each speakers can be adjusted in a range from 0 to 12.5 in Time (ms) or Distance (mm) (Fig.15). Each channel has independent volume, mute, and polarity control. Channel linking is possible by selecting (FL-FRRL-RR), (FL-FR) OR (RL-RR) to control all four channels or two channels for front and rear. The off position allows for independent channel adjustment (Fig.16).
PAGE 9
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Crossover Configuration Equalization Choose between Butterworth or Bessel filter type. Select the appropriate frequencies and slopes for each speaker (Fig.17). There are 31 bands of equalization. Each channel can be tuned independently or combined. Swipe left or right over the sliders to reveal additional frequency bands (Fig.18).
PAGE 10
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Wiring Diagrams Amplifier Bridge Mode taylormadeproducts.com/wavemaker 574-537-8900 10 CCD-0003867 Rev:06.11.
PAGE 11
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Stereo Mode taylormadeproducts.com/wavemaker 574-537-8900 11 CCD-0003867 Rev:06.11.
PAGE 12
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) INFORMATION TO THE USER FCC ID: XNI-ID25351 FCC COMPLIANCE STATEMENT Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
PAGE 13
Taylor Made Wavemaker Stereo ® Installation and Owner’s Manual (For Aftermarket Applications) Manual information may be distributed as a complete document only, unless Lippert Components provides explicit consent to distribute individual parts. All manual information is subject to change without notice. Revised editions will be available for free download at lci1.com. Manual information is considered factual until made obsolete by a revised version.