User's Manual

ManualsBrandsLinx Technologies ManualsElectronicsCompact Handheld Transmitter

DESCRIPTION

The Linx OTX-***-HH-CP8-MS Compact

Handheld Transmitter is ideal for general-

purpose remote control and command

applications. This unit has been pre-certified

for FCC Part 15, Industry Canada, and

European CE (433MHz only) compliance,

reducing costs and time to market. Available

in 315, 418 (standard), or 433.92MHz, this

compact remote has a transmission range of

up to 1,000 feet when combined with the LR

Series receiver. The transmitter unit can be

configured with 1 to 8 buttons and the keypad

and labeling can be modified to meet specific

OEM customer requirements. Ease of use

and security are dramatically enhanced by

the on-board MS Series encoder, which

allows instant creation of up to 16,777,216

) unique addresses without cumbersome

DIP switches or cut traces. When paired with

a MS Series decoder, transmitter identity can

be determined and button permissions

established. The unit uses a single 3V

CR2032 lithium button cell.

FEATURES

 FCC, Canada, and CE pre-certified

 1 to 8 buttons

 Small package

 Customizable keypad

APPLICATIONS INCLUDE

 General Remote Control

 Keyless Entry

 Garage / Gate Openers

 Lighting Control

 Call Systems

 Home / Industrial Automation

 Wire Elimination

OEM Configurations

With a one-time NRE and minimum

order, Linx can configure the keypad

and label areas to meet your specific

requirements. Contact Linx for details.

MS COMPACT HANDHELD TRANSMITTER DATA GUIDE

2.00"

1.35"

R 0.2"

2.81"

1.62"

0.60"0.20"

Revised 2/28/06

Figure 1: Package Dimensions

WIRELESS MADE SIMPLE

PART # DESCRIPTION

OTX-***-HH-CP8-MS-xxx MS Compact Handheld Transmitter

MDEV-***-HH-CP8-MS HH-CP8 Master Development System

*** = 315, 418 (Standard), 433.92 MHz

xxx = Color Leave blank for standard Black

ORDERING INFORMATION

Summary of content (5 pages)

PAGE 1
WIRELESS MADE SIMPLE MS COMPACT HANDHELD TRANSMITTER DATA GUIDE DESCRIPTION The Linx OTX-***-HH-CP8-MS Compact Handheld Transmitter is ideal for generalpurpose remote control and command applications. This unit has been pre-certified for FCC Part 15, Industry Canada, and European CE (433MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this compact remote has a transmission range of up to 1,000 feet when combined with the LR Series receiver.
PAGE 2
ELECTRICAL SPECIFICATIONS Parameter Designation Min. POWER SUPPLY Operating Voltage VCC Supply Current ICC Power-Down Current TRANSMITTER SECTION Transmit Frequency Range: IPDN SETTING THE TRANSMITTER ADDRESS Typical Max. Units Notes 2.1 3.0 3.6 VDC – – 3.4 – mA – – 5.0 – nA 1 OTX-315-HH-CP8-MS – 315 – MHz – OTX-418-HH-CP8-MS – 418 – MHz – OTX-433-HH-CP8-MS – 433.
PAGE 3
CONTENTION CONSIDERATIONS COMPLIANCE REQUIREMENTS It is important to understand that only one transmitter at a time can be activated within a reception area. While the transmitted signal consists of encoded digital data, only one carrier of any particular frequency can occupy airspace without contention at any given time.
PAGE 4
TYPICAL APPLICATIONS R11 100k 100k R10 R9 100k 100k R8 R7 100k 100k R6 100k R5 R4 100k 3 2 R2 4 1 3 3 4 4 GND DPAK-X2 U5 DPAK-X2 2 U4 1 GND R1 100k Learn S1 SEND CREATE_ADDR GND GND VCC C1 4.
PAGE 5
WIRELESS MADE SIMPLE U.S. CORPORATE HEADQUARTERS LINX TECHNOLOGIES, INC. 575 S.E. ASHLEY PLACE GRANTS PASS, OR 97526 PHONE: (541) 471-6256 FAX: (541) 471-6251 www.linxtechnologies.com Disclaimer Linx Technologies is continually striving to improve the quality and function of its products. For this reason, we reserve the right to make changes without notice. The information contained in this Data Guide is believed to be accurate as of the time of publication.