TECHNOLOGIES Raa LIX = = SEM KEY FOB TRANSMITTER DATA GUIDE DESCRIPTION The Lin CM D-KEYX-XXX Remote Command key fob is ideal for general purpose remote control and command applications. The unit has been prettified for FCC Part 15 compliance which reduces costs and time to product introduction. Available in 315, 418 or 433.92 MHz (418MH2 standard), this stylish and compact remote is capable of 100+ ft. transmission range. The unit can be configured with 1.
PERFORMANCE DATACMD-KEYX-XXX ABOUT THESE MEASUREMENTS The performance parameters listed below are based on module operation at 25°C from a evade supply unless otherwise noted. Frequency of Carrier Fo 114.925 318 5.075 MHz Harmonic Emissions dio Linen: Frequency of Carrier Fo 417.925 418 418075 | MHz Harmonic Emissions dBe a Fg 433845 | 433.92 | 433.965 Harmonic Emissions Pu == as Operating Voltage Range % 32 Current Average ~ wool = Current In Skye ~ ° Output Power PART 15.
Schematic Diagram vee 81 71 TOUCH PAD ut vee TOUGH PAD , HT-644 HT-640 vee = CUT TRACE FOR yee 52 202 D2 po [£2 ADDRESS SELECT “—BAT| D6 D6 AB TOUCH PAD DOUR DOUR Ad GND 0sc2 0sC2 A2 44 Re 390K HL osc osc at t $——Eed GND GND A0 TOUCH PAD HT-640 7-640 S4 A GND * SAW 4 il Veo t ¢ 500 A out Oscillator nt.
} USING THE KEY FOB WITH LIX RECEIVER MODULES Key fob Address Lines Key fobs are shipped with all address lines tied to ground (Default) with 1024 possible address combinations available by cutting address traces. KH Series Receiver/Decoder Module The Key fob works directly with the KH series receiver/decoder modules when AD-A are set to the same configuration as bl LOT 1000 the key fob address lines.
LIX TECHNOLOGIES LF 11] ] wire Less MAGE Staple U.S. CORPORATE HEADQUARTERS: LIX TECHNOLOGIES, INC. 575 S.E. ASHLEY PLACE GRANTS PASS, OR 97526 PHONE: (541) 471-6256 FAX: (541) 471-6251 Disclaimer Lin Technologies is continually striving to improve the quality and function of its products; for this reason, we reserve the right 10 make changes without notice. The information contained in this Data Sheet is believed to be accurate as of the time of publication.