Owner's Manual

ManualsBrandsLinx Technologies ManualsElectronicsRemote Command Unit

OEM CONFIGURATIONS

With a one-time NRE and minimum

order, Linx can configure the

keypad and label areas to meet

your specific requirements. Contact

Linx for details.

OEM LONG-RANGE HANDHELD TRANSMITTER DATA GUIDE

CMD-HHLR-xxx

DESCRIPTION

The Linx HHLR Remote Command

Unit is ideal for general-purpose

remote-control and command appli-

cations. This unit has been pre-

certified for FCC Part-15 compliance

which reduces costs and time to

product introduction. Available in 315,

418 or 433.92 MHz (418MHz

standard), this compact handheld

remote is capable of a 300+ ft.

transmission range. The transmitter

unit can be configured with 1-8 buttons

and the keypad and labeling can be

modified to meet specific customer

requirements. Selectable addressing

provides security and allows the

creation of up to 1024 distinct

transmitter-receiver relationships. The

transmission can be decoded using a

matching Linx function module, KH-

Series module, or a Linx LC-Series

receiver paired with a decoder IC or

microcontroller. The unit operates from

a single 3-volt lithium cell.

■ General Remote Control

■ Keyless Entry

■ Garage / Gate Openers

■ Lighting Control

■ Call Systems

■ Home / Industrial Automation

■ Wire Elimination

APPLICATIONS INCLUDE:

PART # DESCRIPTION

CMD-HHLR-xxx 8-Button Long-Range Transmitter

xxx = 315, 418*, 433

* = Standard Frequency

ORDERING INFORMATION

CONTROLLER

Physical Dimensions

Revised 3/20/02

Summary of content (6 pages)

PAGE 1
CMD-HHLR-xxx OEM LONG-RANGE HANDHELD TRANSMITTER DATA GUIDE DESCRIPTION The Linx HHLR Remote Command Unit is ideal for general-purpose remote-control and command applications. This unit has been precertified for FCC Part-15 compliance which reduces costs and time to product introduction. Available in 315, 418 or 433.92 MHz (418MHz standard), this compact handheld remote is capable of a 300+ ft. transmission range.
PAGE 2
THEORY OF OPERATION The CMD-HHLR-xxx Remote Command Unit combines the popular Linx LCSeries transmitter and an antenna, with a commonly available encoder IC to form a simple yet effective RF remote-control transmitter. When a button is activated on the remote unit, power is applied to the internal circuitry and the encoder IC is enabled. The encoder then detects the logic states of the DIP-switch address and button data lines.
PAGE 3
HHLR Assembly Page 3
PAGE 4
COMPLIANCE REQUIREMENTS The CMD-HHLR-xxx has been pre-certified by Linx for FCC Part-15 compliance when used with an appropriate function module in keeping with the applications allowed under section 15.231. LABELING/INSTRUCTION REQUIREMENTS The CMD-HHLR-xxx Remote Command Unit has already been labeled in accordance with FCC regulations in effect as of the date of this document.
PAGE 5
This Page Intentionally Left Blank Page 5
PAGE 6
U.S. CORPORATE HEADQUARTERS: LINX TECHNOLOGIES, INC. 575 S.E. ASHLEY PLACE GRANTS PASS, OR 97526 PHONE: (541) 471-6256 FAX: (541) 471-6251 http://www.linxtechnologies.com Disclaimer Linx Technologies is continually striving to improve the quality and function of its products; for this reason, we reserve the right to make changes without notice. The information contained in this Data Sheet is believed to be accurate as of the time of publication. Specifications are based on representative lot samples.