OEM Compact Handheld Transmitter Data Guide
Warning: Linx radio frequency ("RF") products may be used to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns. No Linx Technologies product is intended for use in any application without redundancies where the safety of life or property is at risk.
OEM Compact Handheld Transmitter Data Guide Description R 0.2" The CMD-HHCP-***-xxx-MD Compact Handheld transmitter is ideal for general 2.00" remote control and command applications. 2.81" As a part of our DS Series encoder-based 1.35" OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433MHz only) compliance, reducing development costs and time to 1.62" 0.20" 0.60" market. Available in 315, 418 (standard) or Figure 1: Package Dimensions 433.
Theory of Operation Ordering Information The CMD-HHCP-***-MD Compact Handheld transmitter combines the LR Series transmitter with an internal Splatch Series antenna and an on-board DS Series encoder IC to form a simple, yet highly reliable, RF remote control transmitter. The LR transmitter is a low-cost, high-performance, synthesized ASK / OOK transmitter.
Protocols Setting the Transmitter Address The DS Series encoder inside the Compact Handheld transmitter supports two protocols. The first protocol is based on the Holtek HT640 encoder and is completely backwards compatible with older generation transmitters and systems based on the HT658 decoder. The second is a serial protocol that offers more noise immunity and faster response time while keeping the simple addressing.
Connection Considerations Labeling / Instruction Requirements It is important to understand that only one transmitter at a time can be activated within a reception area. While the transmitted signal consists of encoded digital data, only one carrier of any particular frequency can occupy airspace without contention at any given time.
Receivers Typical Applications There are four options for receivers within the Linx product line. The first option is to use one of the OEM Function Modules, such as the Relay Module. These items are also pre-certified and can be immediately included in a product. The outstanding sensitivity of the LR Series receiver offers the best range when used with the Handheld transmitter. When using the LR Series receiver, the DS Series decoder chip should be used to decode the received signal.
1 GND TX1 2 VCC GNDVCC 3 GND R3 4 Set for FCC Compliance GND PDN DATA VCC GND GND LADJ/VCC 8 TE R6 0 ohm 7 6 Resources VCC GND ANT TXM-XXX-LR S2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U1 P_SEL D0 D1 D2 D3 D4 D5 GND D6 D7 E_D D_CFG A_CFG0 A_CFG1 VT/DO TE/DI A9 A8 A7 A6 A5 A4 VCC GND A3 A2 A1 A0 28 27 26 25 24 23 22 21 20 19 18 17 16 15 11 12 13 14 15 16 17 18 19 20 VCC GND D5 D4 D3 D2 D1 D0 1 1 TE C1 0.
Linx Technologies 159 Ort Lane Merlin, OR, US 97532 3090 Sterling Circle, Suite 200 Boulder, CO 80301 Phone: +1 541 471 6256 Fax: +1 541 471 6251 www.linxtechnologies.com Disclaimer Linx Technologies is continually striving to improve the quality and function of its products. For this reason, we reserve the right to make changes to our products without notice. The information contained in this Data Guide is believed to be accurate as of the time of publication.