User's Manual

ManualsBrandsLinx Technologies ManualsElectronicsCompact Handheld Transmitter

DESCRIPTION

The Linx CMD-HHCP-xxx-*** Remote

Command Unit is ideal for general-purpose

remote control and command applications.

This unit has been pre-certified for FCC Part

15, Industry Canada, and CE (433MHz only)

compliance, reducing development costs and

time to market. Available in 315, 418

(standard), or 433.92MHz, this compact

remote has a transmission range of up to

1,000 feet when combined with the LR Series

receiver. The transmitter unit can be

configured with 1 to 8 buttons and the keypad

and labeling can be modified to meet specific

OEM customer requirements. Selectable

addressing provides security and allows the

creation of up to 1024 distinct transmitter-

receiver relationships. The address can be

easily changed via an externally accessible

DIP switch. The transmission can be

decoded using a matching Linx Function

Module, KH Series receiver/decoder, or a

Linx LC or LR Series receiver paired with a

decoder IC or microcontroller. The unit uses

a single 3V CR-2032 lithium button cell.

FEATURES

 FCC, Canada, and CE pre-certified

 1 to 8 buttons

 Small package

 Customizable keypad

APPLICATIONS INCLUDE

 General Remote Control

 Keyless Entry

 Garage / Gate Openers

 Lighting Control

 Call Systems

 Home / Industrial Automation

 Wire Elimination

OEM Configurations

With a one-time NRE and minimum

order, Linx can configure the keypad

and label areas to meet your specific

requirements. Contact Linx for details.

OEM COMPACT HANDHELD TRANSMITTER DATA GUIDE

2.00"

1.35"

R 0.2"

2.81"

1.62"

0.60"0.20"

Revised 4/29/05

PART NUMBER DESCRIPTION

CMD-HHCP-xxx-*** 8-Button Handheld Transmitter

EVAL-xxx-HHCP HHCP Evaluation System

xxx = 315, 418 (Standard), 433.92 MHz

*** = Color Leave blank for standard Black

WHT = White CGY= Gray CBL = Blue

CRE = Red CPU = Purple

ORDERING INFORMATION

Figure 1: Physical Dimensions

WIRELESS MADE SIMPLE

Summary of content (5 pages)

PAGE 1
WIRELESS MADE SIMPLE OEM COMPACT HANDHELD TRANSMITTER DATA GUIDE DESCRIPTION The Linx CMD-HHCP-xxx-*** Remote Command Unit is ideal for general-purpose remote control and command applications. This unit has been pre-certified for FCC Part 15, Industry Canada, and CE (433MHz only) compliance, reducing development costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this compact remote has a transmission range of up to 1,000 feet when combined with the LR Series receiver.
PAGE 2
ELECTRICAL SPECIFICATIONS Parameter SETTING THE TRANSMITTER ADDRESS Designation Min. Typical Max. Units Notes Operating Voltage VCC 2.1 3.0 3.6 VDC – Supply Current ICC – 3.4 – mA – IPDN – 50 – nA 1 POWER SUPPLY Power-down Current TRANSMITTER SECTION Transmit Frequency Range FC CMD-HHLR-315 – 315 – MHz – CMD-HHLR-418 – – MHz – CMD-HHLR-433 – 418 433.
PAGE 3
CONTENTION CONSIDERATIONS COMPLIANCE REQUIREMENTS It is important to understand that only one transmitter at a time can be activated within a reception area. While the transmitted signal consists of encoded digital data, only one carrier of any particular frequency can occupy airspace without contention at any given time.
PAGE 4
Page 6 SPLATCH ANTENNA ANT1 GND 1 2 3 4 5 6 VCC GND 5 6 7 LRTX GND IADJ/VCC RF OUT GND Set For FCC Compliance 4 GND DPAK-X2 4 U5 1 2 DPAK-X2 3 4 U4 1 R2 100K VCC GND R3 3 VCC DATA IN GND 2 TX1 2 DPAK-X2 3 4 3 U3 1 2 1 U2 16 15 14 13 12 11 10 9 4 3 GND ANT GND NC NC NC NC NC NC DPAK-X2 2 TYPICAL APPLICATIONS VCC 1 R1 390K Application Note AN00300 discusses in detail how to set the addresses on all of the units.
PAGE 5
WIRELESS MADE SIMPLE U.S. CORPORATE HEADQUARTERS LINX TECHNOLOGIES, INC. 575 S.E. ASHLEY PLACE GRANTS PASS, OR 97526 PHONE: (541) 471-6256 FAX: (541) 471-6251 www.linxtechnologies.com Disclaimer Linx Technologies is continually striving to improve the quality and function of its products; for this reason, we reserve the right to make changes without notice. The information contained in this Data Sheet is believed to be accurate as of the time of publication.