User's Manual

ManualsBrandsLinx Technologies ManualsElectronicsRemote Command Unit

OEM CONFIGURATIONS

With a one-time NRE and minimum

order, Linx can configure the

keypad and label areas to meet

your specific requirements. Contact

Linx for details.

OEM COMPACT HANDHELD TRANSMITTER DATA GUIDE

CMD-HHCP-xxx

DESCRIPTION

The Linx HHCP Remote Command

Unit is ideal for general-purpose

remote-control and command appli-

cations.This unit has been precertified

for FCC Part-15 compliance which

reduces costs and time to product

introduction. Available in 315, 418 or

433.92MHz (418MHz standard), this

compact handheld remote is capable

of up to 150 ft. transmission range.The

transmitter unit can be configured with

1-8 buttons and the keypad and

labeling can be modified to meet

specific customer requirements.

Selectable addressing provides

security and allows the creation of up

to 1024 distinct transmitter-receiver

relationships. The transmission can be

decoded using a matching Linx

function module, KH-Series Module, or

a Linx LC-Series receiver paired with a

decoder IC or microcontroller. The unit

operates from a single 3-volt lithium

cell.

■ General Remote Control

■ Keyless Entry

■ Garage / Gate Openers

■ Lighting Control

■ Call Systems

■ Home / Industrial Automation

■ Wire Elimination

APPLICATIONS INCLUDE:

PART # DESCRIPTION

CMD-HHCP-xxx 8-Button Compact Transmitter

xxx = 315, 418*, 433

* = Standard Frequency

ORDERING INFORMATION

CONTROLLER

Physical Dimensions

Revised 3/20/02

Summary of content (6 pages)

PAGE 1
CMD-HHCP-xxx OEM COMPACT HANDHELD TRANSMITTER DATA GUIDE DESCRIPTION The Linx HHCP Remote Command Unit is ideal for general-purpose remote-control and command applications. This unit has been precertified for FCC Part-15 compliance which reduces costs and time to product introduction. Available in 315, 418 or 433.92MHz (418MHz standard), this compact handheld remote is capable of up to 150 ft. transmission range.
PAGE 2
THEORY OF OPERATION The CMD-HHCP-xxx Remote Command Unit combines the popular Linx LCSeries transmitter with an internal Splatch antenna, and a commonly available encoder IC to form a simple yet effective RF remote-control transmitter. When a button is activated on the remote unit, power is applied to the internal circuitry and the encoder IC is enabled. The encoder then detects the logic states of the DIP-switch address and button data lines.
PAGE 3
HHCP Assembly Page 3
PAGE 4
COMPLIANCE REQUIREMENTS The CMD-HHCP-xxx has been pre-certified by Linx for FCC Part-15 compliance when used with an appropriate function module in keeping with the applications allowed under section 15.231. LABELING/INSTRUCTION REQUIREMENTS The CMD-HHCP-xxx Remote Command Unit has already been labeled in accordance with FCC regulations in effect as of the date of this document.
PAGE 5
This Page Intentionally Left Blank Page 5
PAGE 6
U.S. CORPORATE HEADQUARTERS: LINX TECHNOLOGIES, INC. 575 S.E. ASHLEY PLACE GRANTS PASS, OR 97526 PHONE: (541) 471-6256 FAX: (541) 471-6251 http://www.linxtechnologies.com Disclaimer Linx Technologies is continually striving to improve the quality and function of its products; for this reason, we reserve the right to make changes without notice. The information contained in this Data Sheet is believed to be accurate as of the time of publication. Specifications are based on representative lot samples.