User Manual Model: F-7XIPS 1
Startup and Shutdown .................................................................................................................... 2 Usage of the Touch Screen ............................................................................................................. 2 Interface Introduction .................................................................................................................... 3 1. Desktop .................................................................................
Startup and Shutdown Startup: Please press and hold the Power Key for 5s. Shutdown: Press and hold the Power Key for 5s → Click Shutdown → and Confirm Locking and Unlocking the Screen: Press the Power Key very quickly to lock or unlock the Screen. Forced Shutdown: If the device has not responded for quite a while, please press and hold the Power Key or the Reset Key to reboot the device.
for Back to the Previous Interface\9:Shortcut Key for Volume Up\10:Battery Power Status\11:Time Display\12: View all Application Programs 2. Screen Lock A B The device will enter stand-by status if there is no operation for quite a while or the User has pressed the Power Key. There are two stand-by statuses: Deep Sleep and Light Sleep --- under the Deep Sleep mode, the Touch Screen is locked and dark, and it will wake up and enter the Light Sleep mode after the User has pressed the Power Key.
2. The device will enter the Video Playing Interface if the User has selected a video file to play. The Control Menu as shown in the following Diagram will appear on the Screen, and then the User can properly adjust the Videos (including Volume Down and Volume Up, Progress Bar, Video Brightness Up and Down, Previous, Pause/Play, Next, Screen Size, Small Window Playing, Playing Mode, Subtitle, Locking, Add a Video and Settings). 2.
3. Sound Recorder Click the Icon Click the Icon Please click the Icon to enter the Recording Interface (as shown in the following Diagram). to start recording and click and click the Icon to finish recording. to play the recording file the User just finished.
Take a Picture 1. After the Camera has been enabled, please click the Icon to take a picture, and the picture will be automatically saved. 2. It is possible for the User to move the Picture into the Photo Album. Under the Camera Mode, the User can enter the Photo Album and view various photos in the form of Sudoku, and 3 pictures can be displayed at the same time at most. 3.
5. Press the Back Key and go back to the Camera Mode. 6. Click the Icon and go back to the Camera Interface. Note: You can click the Icon to shift between the Front Camera and Rear Camera for taking a picture or recording a video. (Only for the double-camera Model.) 5. Browser Click the Icon 1 to enter the Browser webpage: 2 3 4 1 1: Previous webpage you have browsed and you can view it again as you like; 2: Current webpage;3: Add a webpage; 4: Menu Key 6.
7. Calendar Click the Calendar Icon . It is necessary for you to log in if you are using the Calendar for the first time. Please correctly input the Email address and password. Then, please click Next and finish the account configuration. After that, you can finally use the Calendar. Add a New Activity 1. 2. 3. 4. In the Calendar, please click and select the date you want for your new activity. Select the activity time → Input relevant information for the new activity in detail. Click FINISH.
Delete An Alarm Clock → click the Icon 1. Click the Clock Icon . 2. Click the Alarm Clock you want to delete and pull it to . 3. Click Delete the Alarm Clock. Click the Icon to go back to the Desktop. 9. Calculator 1. Click the Calculator Icon . 2.Click and select the numbers and symbols to conduct calculation. 3. Click Clear to eliminate the numbers and symbols one by one, and press Clear for a while to eliminate all numbers and symbols. 10. Downloads 1. Click the Icon . 2.
12. Email ☆ This device supports POP3 and SMTP Email Accounts. Add one (more than one)Email Account You can input one or more than one Email address as you like in this device. 1. Click the Email Program Icon . 2. 3. 4. 5. 6. In the YOUR ACCOUNT Interface, please click NEXT. Click the Options for Email Addresses, and then input your Email address. And then correctly input your Email password. Click FINISH.
My Messages 1. Click the Email Icon . 2. If the User has only configured one Email Account, the User can open it very quickly; if the User has configured more than one Email Account, the list of Email Accounts will be displayed. 3. Click the Email Account you need, and then click My Messages. View an E-mail 1. In My Messages, click and view the e-mail you want. 2. For attachments, please click and enable relevant application program; or you can click and save them to your SD Card. 3.
4. In the Account Options, please click and Delete the Account you want. 5. Click Confirm to successfully delete the account. Set a Default Email Account Since you shall have a default Email Account, you need select one from your different accounts as the default Email Account. 1. Click the Email Icon . 2. In My Messages, click Menu→ Account Settings. 3. Click Default Account for confirmation.
Delete the Files Press the file or folder you need and select DELETE. Settings Wi-Fi and Network Configure and manage the wireless access point. (See WIFI Network Settings for details.) Wi-Fi Bluetooth This device does not support Data Traffic Usage More... Please turn on the Bluetooth and click the Bluetooth device name, making it detectable and available for nearby Bluetooth devices. Configure and manage the data traffic.
Language and Input methods Backup and Resetting User’s Information To display the User’s information on the Screen Device Management 1. Add or delete a Device Manager. 2. Unknown APK Installation Settings. Credential Password Mange the application program to access the security credential and other credentials. Storage Language Configure the default language.
3G Network Settings 1. When you want to connect your device with the 3G network, you shall firstly select the correct 3G network card suitable to your device because this device only supports external USB 3G Network Card. Please consult the Supplier for suitable 3G Network Card model. 2. When the SIM card has been well installed, please connect the 3G network card with the HOST USB port by means of the USB OTG connection cable. 3.
☆ Please do not quickly repeat inserting and pulling the SD Card; otherwise, the SD Card may be damaged. ☆ Memory Card of famous brand is suggested so as to avoid incompatibleness with the device. Download/Unload Application Programs ☆ It is possible for the User to search interesting and free Android application programs in great variety on the Internet. You shall start the Browser and try to search Android Application Programs.
2. With successful connection, the Icon PC; please click the Icon will appear on the screen of the Tablet , and then select Turn on the USB Storage. After that, it is possible for the User to conduct Data Storage between your PC and the Tablet PC, as shown below: Charging This device can be charged by means of the Power Adapter with one end connecting to the Power Supply and the other end to the supply hub of this device.
Please protect the Power Cable. When it has been connected with the power supply, please do not tread on it or place other objects above it. Please pay special attention to the joint of the Power Cable Connection Device. Please use the original power adapter to conduct charging for this device. Other chargers may cause damages to this device. Please do not disassemble the casing or repair this device by yourself. Please take good care of the Display Screen.