Instructions / Assembly

ManualsBrandsLinon Home Decor ManualsDining Room SetsBecker Black Antique Nook

IMPORTANT NOTE: Follow intructions listed below in the proper sequence as numbered to assure fast,

easy and correct assembly. Factory code: BR7 - 50156

Antique Nook Black AB

We are here to help! Before you return It - contact us.

We do our best to ensure that your furniture arrives in excellent condition. In the

event that a part is damaged or missing, Linon Home Decor will be happy to

provide you with replacement parts, at no charge, within 30 days of purchase,

providing the parts are available in our warehouse and the item purchased is part

of our current invetory. In order to receive spare parts, at no charge, you must

provide proof of purchase within 30 days.

If you need assistance with assembly or replacement parts, please call Linon

Customer service, prior to returning the item to the store.

Our ofﬁce is open Monday- Friday 9 AM-5PM, Eastern Standard Time.

Our toll free customer service number is: 1-800-262-1852.

Or visit our web site w.w.w.Linon.com to order spare parts and for care

instructions on your newly purchased furniture.

# 903805BLKAB

Summary of content (18 pages)

PAGE 1
# 903805BLKAB Antique Nook Black AB We are here to help! Before you return It - contact us. We do our best to ensure that your furniture arrives in excellent condition. In the event that a part is damaged or missing, Linon Home Decor will be happy to provide you with replacement parts, at no charge, within 30 days of purchase, providing the parts are available in our warehouse and the item purchased is part of our current invetory.
PAGE 2
PAGE 1 HARDWARE PACKAGE COUNT(CORNER BENCH) OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE IDENTIFICATION COLUMN. CALL CUSTOMER SERVICE IF ANY PARTS ARE MISSING. FOLLOW THE LETTER IDENTIFICATION WHEN READING THE ASSEMBLY DRAWING “A” THROUGH “K”.
PAGE 3
PAGE 2 PARTS IDENTIFICATION - LEFT OUTSIDE LEG #01 - SINGLE BENCH STORAGE BOTTOM #13 - SINGLE BENCH BACK RAIL #14 - SINGLE BENCH FRONT RAIL #15 - RIGHT OUTSIDE LEG #02 - MIDDLE LEG ( LEFT) #03 - MIDDLE LEG (RIGHT) #04 - SINGLE BENCH SEAT #05 - DOUBLE BENCH SEAT #06 - DOUBLE BENCH BACK REST #07 - SINGLE BENCH BACK REST #08 - CENTER BACK PANEL #09 - CORNER SEAT #10 - CENTRAL BACK (LEFT) #11 - CENTRAL BACK (RIGHT) #12 - CLEAT (4X) #16 - DOUBLE BENCH FRONT RAIL #17 - DOUBLE BENCH BACK RAIL #18 - DOUBLE BENC
PAGE 4
PAGE 3 STEP 1) 1.1 INSERT(15) WOODEN DOWELS (A), AND (20) WOODEN DOWELS (B) INTO THE HOLES LOCATED ON THE EDGES OF THE FOLLOWING PARTS. - CENTER BACK PANEL# 09 - CORNER SEAT# 10 - CENTRAL BACK (LEFT) # 11 - CENTRAL BACK (RIGHT)# 12 - DOUBLE BENCH BACK REST# 07 - SINGLE BENCH BACK REST # 08 - CLEAT# 16 (4x) A 16 A 4x 10 B B B B B B B B 11 B A 12 B B A B A B A A 9 A B A B A 7 B B B B 08 B B I 06 I 05 I I I 1.2.
PAGE 5
PAGE 4 STEP 2) 2.1 FIX CLEATS #16 (4X) TO LEFT OUTSIDE LEG #01, RIGHT OUTSIDE LEG #02 AND MIDDLE LEGS #03 AND #04, USING (12) SCREWS (G), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE, AS PER DRAWING BELOW.
PAGE 6
PAGE 5 STEP 3) 3.1 JOIN THE PIECES # 05, #08, #13, #14 AND #15 TO MIDDLE LEG #03, USING THE WOODEN DOWELS AND PINS ALREADY INSERTED. 3.2 FIX THE BACK AND FRONT RAILS # 14 AND #15 TO MIDDLE LEG #03, USING (04) SCREWS (G), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS PER DRAWING BELOW. 3.
PAGE 7
PAGE 6 STEP 4) 3.1 JOIN THE PIECES # 06, #07, #17, #18 AND #19 TO MIDDLE LEG #04, USING THE WOODEN DOWELS AND PINS ALREADY INSERTED. 3.2 FIX THE BACK AND FRONT RAILS # 17 AND #18 TO MIDDLE LEG #04, USING (04) SCREWS (G), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS PER DRAWING BELOW. 3.
PAGE 8
PAGE 7 STEP 5) 5.1 : TO ASSEMBLE THE CORNER PIECES, YOU NEED TO JOIN THE PIECES #11 AND #12, TO CORNER SEAT #10, USING THE WOODEN DOWELS ALREADY INSERTED. AFTER THAT, FIX THE PIECES USING (04) SCREWS (F) AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AS PER DETAIL. 10 11 10 F F 12 F F F 4x USE / MAINTENANCE 1. Indoor use only. 2. Wipe clean with damp cloth. Produced by: CONSTRUTORA IMPLANTEC Rod.
PAGE 9
PAGE 8 STEP 6) 6.1 : TO ASSEMBLE THE CORNER PIECE TO SMALLER AND BIGGER BENCHES, JOIN THE PIECES USING THE WOODEN DOWELS ALREADY INSERTED. FIX THE PIECES USING (04) SCREWS (H), AND THE ALLEN WRENCH (K) (PROVIDED), AS PER DRAWING BELOW: 11 12 10 4 3 4x H K STEP 7) 7.1 : CONTINUE THE ASSEMBLY OF THE CORNER BENCH, FIXING THE PIECES #11 AND #12 TO THE MIDDLE LEGS, USING (06) SCREWS (F) A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AND PRE- DRILLED HOLES AS GUIDE, AS PER DETAIL.
PAGE 10
PAGE 9 STEP 8) 8.1: FIT CENTER BACK PANEL # 09 TO CORNER SEAT #10, USING THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDES. 9 10 STEP 9) 9.1: FIX CENTER BACK PANEL #09 TO CORNER SEAT # 10, USING (03) SCREWS (F), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDES.
PAGE 11
PAGE 10 STEP 10) 10.1 : FIX THE TOP RAILS #20, #21 AND #22, TO THE ASSEMBLED BENCH, USING (11) SCREWS (F) AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AS PER DRAWING BELOW. 10.2: SECURE THE CORNER TOP PANEL #22 , FIXING IT TO SUPPORT #23, USING (02) SCREWS (F) AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AS PER DRAWING. 13x F STEP 11) 11.
PAGE 12
PAGE 12 HARDWARE PACKAGE COUNT (TABLE) OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE IDENTIFICATION COLUMN. CALL CUSTOMER SERVICE IF ANY PARTS ARE MISSING. FOLLOW THE LETTER IDENTIFICATION WHEN READING THE ASSEMBLY DRAWING “C” THROUGH “L”.
PAGE 13
PAGE 13 STEP 1) 1.1 INSERT (12) WOODEN DOWELS (C) IN TO THE LEGS #26 (2X), TABLE TOP SUPPORT #25 AND CROSSBAR #27, AS PER DRAWING AND DETAILS BELOW. C C 25 C C C 04x 26 27 C 2x C C C C C 08x C STEP 2) 2.1 ASSEMBLE THE TABLE BASE FIXING THE TABLE TOP SUPPORT #25 AND CROSSBAR #27 TO BOTH LEGS #26, USING (04) SCREWS (H), AN ALLEN WRENCH (K) (PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE, AS PER DRAWING.
PAGE 14
PAGE 11 USING HELP, PLACE THE CORNER BENCH IN ITS FINAL POSITION IN WHICH IT WILL BE USED.
PAGE 15
PAGE 14 STEP 3) 3.1 FIX THE BASE OF THE TABLE TO TABLE TOP #24 USING (03) SCREWS (F), (8) SCREWS (G), AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AS PER DRAWING BELOW: 3.2) TO AVOID SCRATCHING THE FLOOR, PLEASE ATTACH (04) ADHESIVE FELT (L) ON THE TABLE BASE, AS PER DRAWING BELOW. L L L L L 26 8x G 4x 26 G F G F F 3X G G F G G G G 24 STEP 4) 4.1 USE (04) SCREW CAPS (J) TO COVER THE HEAD OF THE SCREWS (H), AS PER DRAWING BELOW.
PAGE 16
PAGE 15 HARDWARE PACKAGE COUNT(SIMPLE BENCH) OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE IDENTIFICATION COLUMN. CALL CUSTOMER SERVICE IF ANY PARTS ARE MISSING. FOLLOW THE LETTER IDENTIFICATION WHEN READING THE ASSEMBLY DRAWING “C” THROUGH “L”.
PAGE 17
PAGE 16 STEP 1) 1.1 INSERT (08) WOODEN DOWELS (C) TO LEGS #29 (2X) AND CROSSBAR # 30, AS PER DRAWING AND DETAILS BELOW. C C 29 C 04x 2X 04x C C 30 C c C STEP 2) 2.1 TO ASSEMBLE THE BENCH BASE, FIX BOTH LEGS #29 TO CROSSBAR #30, USING (02) SCREWS (H), AN ALLEN WRENCH (K) (PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE, AS PER DRAWING. 2.
PAGE 18
CARE INSTRUCTIONS · Care and cleaning should be done with a soft cloth and water. · Do not use abrasive products and steel wool · Do not expose the furniture to bad weather or excessive heat. SOINS · Les soins et le nettoyage doivent être faits avec un chiffon doux et de l'eau. · Ne pas utiliser de produits abrasifs et de laine d'acier. · Ne pas exposer les meubles aux intempéries ou à la chaleur excessive.