User's Manual

ManualsBrandsLINKSYS ManualsElectronicsHIGH DEFINITION MEDIA PLAYER

english

Now that you have connected your player to the other devices, you can begin setup. First, we recommend that you turn on your television before turning on your KiSS Player.

This way, the video channel you have chosen will appear on your television screen automatically. Turning on your KiSS Player before your television, however, has no negative

affect on the use or operation of your player. In this case, you would simply have to use your TV remote to search for the video channel you want your player set to, instead

of it appearing automatically.

Turning your player "On" for the first time

2. Press the On/Off button located on the back of your KiSS player to turn the

player on. A red light will appear on the front display indicating that the player

is on Standby mode.

1. Turn "On" your television.

3. Press the Standby button on your remote to start the player. If you

are powering up your KiSS player for the first time, the Quick Setup

Menu will appear automatically.

english

Summary of content (5 pages)

PAGE 1
Turning your player "On" for the first time english 6 english Now that you have connected your player to the other devices, you can begin setup. First, we recommend that you turn on your television before turning on your KiSS Player. This way, the video channel you have chosen will appear on your television screen automatically. Turning on your KiSS Player before your television, however, has no negative affect on the use or operation of your player.
PAGE 2
Quick Setup english 7 Powering up your player for the first time, you will be presented with the Quick Setup wizard allowing you basic setup of your player with very few button presses and minimal technical knowledge. The Quick Setup is simple and largely self-explanatory. Should you at a later time wish to go through it again or alter some more advanced settings, please consult the “Advanced Setup” section of this User Guide.
PAGE 3
english 5. Selecting the Network Once you have connected an Ethernet cable to your DP-600 or are ready to set your wireless network, select either “Wired Network” (for ethernet cable connection) or “Wireless Network” depending on the type of network connection you wish to set up. - If you have selected “Wired Network”, proceed to item 6a. - If you have selected “Wireless Network”, proceed to item 6b. - If you do not wish to set up your network yet, simply select “No Network” to complete QuickSetup.
PAGE 4
Player Menu english 8 This section walks you through each section of the main menu of the player giving you access to all of its primary functions like file browsing, playback of media and online services. To exit or re-enter the menu, simply press the MENU button on your remote control. Disc Playback Resume playback: If you have previously stopped playback of a DVD disc still in the player, press this to resume playback where you left off. english Play: Play the disc currently inserted in the player.
PAGE 5
english on a computer monitor. Developing KML pages require some basic programming skills but is fairly simple to understand. Information on how to develop your own KML pages can be found in the support section of our website at www.kiss-technology.com/support. Customize "My KML" Page: Entering this menu item allows you to define an IP address pointing to a KML page of your choice. KiSS Technology does not maintain or keep track of third party pages.