Service Manual

ManualsBrandsLink Safety HUB ManualsElectronicsMOB Link Safety HUB

Table Of Contents

1st Mate Kit - Mercury

1ST MATE KIT - MERCURY

IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or

service of our products. If you have not been trained in the recommended servicing or installation procedures for these or

similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper

installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or

operating the product. Always refer to the appropriate Mercury Marine service manual for component removal and installation

instructions.

NOTE:

After completing installation, place these instructions with the product for the owner's future use.

DRAFT

COPY

DRAFT

COPY

DRAFT

COPY

DRAFT

COPY

DRAFT

COPY

Components Contained in Kit

69924

Ref. Qty. Description

a 1 1st Mate hub

b 4 Screw

c 1 Hub antenna

d 1 NFC chip

e 1 1st Mate driver fob kit

f 1 1st Mate harness

Single (1 key switch drop)

Dual (2 key switch drops)

Triple (3 key switch drops)

4/5/6 engine (6 key switch drops)

Summary of content (8 pages)

PAGE 1
ST MATE KIT - MERCURY IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or service of our products. If you have not been trained in the recommended servicing or installation procedures for these or similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician.
PAGE 2
1ST MATE KIT - MERCURY Hub Installation ! WARNING Before working around electrical system components, disconnect the battery cables from the battery to prevent injury or damage to the electrical system due to an accidental short circuit. 1. Place the hub so that the antenna is at least 50.8 mm (2.00 in.) from other electronic or magnetic equipment including Chartplotters, VHF radios, GPS receivers, and antennas. 2. Use the following dimensions to select the desired location for the hub.
PAGE 3
1ST MATE KIT - MERCURY 5. Connect each trunk of the 14‑pin hub harness to the corresponding main station extension harness connector and its respective key switch harness connector (as equipped), i.e. single, dual, triple, quad, five, or six engine applications. The starboard key switch harness drop (labeled STBD) must be connected to the starboard engine key switch. Refer to Diagrams. T F A R D PY O Diagrams C Single Engine Applications Antenna Installation 1.
PAGE 4
1ST MATE KIT - MERCURY Dual Engine Applications c a e d b h f g f STBD j i 69908 abcdefghij- Antenna HUB Driver fob Mobile device Junction box Key switch harness Starboard engine key switch Key switch Hub harness NMEA 2000 Page 4 / 8 © 2019 Mercury Marine 90-8M0159024 eng DECEMBER 2019
PAGE 5
1ST MATE KIT - MERCURY Triple Engine Applications c a e d b h f h f g f STBD j i 69909 abcdefghij- Antenna HUB Driver fob Mobile device Junction box Key switch harness Starboard engine key switch Key switch Hub harness NMEA 2000 90-8M0159024 eng DECEMBER 2019 © 2019 Mercury Marine Page 5 / 8
PAGE 6
1ST MATE KIT - MERCURY Four, Five, and Six Engine Applications c a e d b h f h f h f h f h f g f STBD j i 69902 abcdefghij- Antenna HUB Driver fob Mobile device Junction box Key switch harness Starboard engine key switch Key switch Hub harness NMEA 2000 FOB Initial Pairing a - LEDs a 1. Theft deterrent system (TDS) active 2. Man overboard (MOB) active 3. NMEA network connected 4. SmartCraft network connected 5.
PAGE 7
1ST MATE KIT - MERCURY LED Indicators LED Green Red Blue TDS MOB NMEA SmartCraft Bluetooth System Configuration Download the app from Google Play or the Apple App Store after point of sale transaction or during the vessel delivery and sea trial. Technical Specifications Hub General Hub Operating temperature range ‑10 °C–70 °C (14 F°–158 F°) Storage temperature range ‑40 °C–85 °C (‑40 F°–185 F°) Operating humidity range 0–100% Voltage source 13.
PAGE 8
1ST MATE KIT - MERCURY Certifications and Compliance Hub Radio ‑ hub US: FCC Part 15c EU: R&TTE, EN 300 328, Maritime/CE EMC ‑ hub US: CISPR 16‑1 EU: EN 301 489‑01 (V1.9.2), Class A T F A R D PY O C For Products Sold in the US/CAN Flammability ‑ fob Imersion ‑ fob IEC 60950 1&22, CE‑UL94 IEC 60945 IP68, Maritime/CE ‑ 3m / 10ft. water resistant Compliant materials Compliant RoHS (2002/95/EC) ABYC A‑33 ABYC A33 & E–11 Compliant.