Spec Sheet

Block Coded Transmitters
Model MT-1B & MT-2B
•
Compatible with all Linear Access receivers and
controllers.
•
Factory block coded to one of over 1,000,000 ID
codes.
•
Factory block coded to one of 15 Facility Codes.
•
Visor Mount.
Linear’s MT Series block coded transmitters provide you
with a cost effective method to give you the ability to
incorporate the security and convenience of block coded
transmitters into your application.
The MT Series block coded transmitters are precoded at
the factory with their unique ID codes and do not require
any additional lead times when ordering. The MDT Series
block coded transmitters are still available for your custom
coded needs. Call the factory for specific lead times.
In addition to each transmitter containing a unique ID code,
the MT Series block code transmitters incorporate facility
codes. The combination of each transmitter containing it’s
own ID code and facility codes gives you the same level of
security as a traditional Wiegand card.
Learning the MT Series block coded transmitters into
memory is as simple as entering the beginning number
and ending number of the block into the controller.
Depending on the controller, enrolling transmitters can be
accomplished via user friendly software or manually at the
controller.
The MT Series block coded transmitters are housed in the
classic access control transmitter housing, but are
distinguished from the rest by cool gray button.
The MT-1B is a single channel transmitter that is used
where only one remote control function is needed, such as
an entrance gate that utilizes a free exit loop.
The MT-2B is a two channel transmitter that sends a unique
signal from either of the two buttons. The MT-2B is ideal
for applications that require access control for both entry
and exit or when a secondary remote control function is
needed, such as gate access and garage access.
COMPATIBLE CONTROLLERS
AM/II: The AM/II is a multi door controller with a built in
radio receiver. External receivers, card readers and
keypads can be added to an AM/II. Up to 8 AM/II’s can be
networked together to create a 32 door access control
system.
AE-1: The AE-1 Telephone Entry system contains all if the
features and benefits of the AM/II, but also includes
telephone entry capabilities. The AE-1 has a 2 x 16
character liquid crystal display.
AE-2: The AE-2 Telephone Entry systems also contains all
of the features and benefits of the AM/II. The AE-2 is
similar to the AE-1, except the AE-2 contains a 2 x 20
character vacuum florescent display.
WOR: The WOR is a Wiegand Output Receiver that will
accept signals from the MT Series block coded transmitters
and provide a 26, 30 or 31 Bit Wiegand output to go to
another manufacturers access control panel.
AKR-1: The AKR-1 contains all of the features and benefits
of the AccessKey keypad, such as 480 user codes, plus a
built-in receiver that will accept 480 block coded
transmitters.
FREQUENCY
318 MHz
NUMBER OF CODES
1,000,000+, 15 Facility Codes
DIMENSIONS
2.2 W X 3.8 H X .9 D inches
STANDARD EQUIPMENT
9v battery & screw mount visor clip
[phone] • FAX [phone]
USA & Canada [phone] & [phone]
Toll Free FAX [phone]
www.linearcorp.com