® RELAY G10S PILOT’S GUIDE 40-00-0402 - B www.line6.com/manuals © 2018 Yamaha Guitar Group, Inc. All rights reserved.
System Overview • • • • • • • Wireless freedom for your pedalboard Best in class sound quality provided by: • 24-bit uncompressed digital transmission • Best in class DAC and ADC provide super low noise transmission (better than 110dB dynamic range) Easy to use - no setup required Automatically chooses the best channel for true playing freedom Optional manual channel selection for setups with multiple wireless units Up to 8 hours of playing time per charge Up to 130 ft. (40 meters) wireless range 2.
Getting Started 3. Connect the receiver to a 9V or USB power source. Connect the receiver's Instrument Output into an amp or FX unit. 1. Plug the transmitter into the receiver. Inserting the transmitter all the way into the receiver allows the battery to charge. A green steady LED on the transmitter indicates the transmitter is fully charged. While docked, the transmitter and the receiver automatically set themselves to the best channel. 4.
Transmitter Details When the transmitter is plugged into the receiver for charging, a flashing red LED indicates less than 30 minutes of battery operation, a flashing green LED indicates more than 30 minutes of battery operation and a steady green LED indicates a fully charged transmitter. 1 2. Guitar Plug - Plug into guitar. 3 3. Antenna - The calibrated internal antenna avoids damage or deformity in normal use.
Receiver Details 4. Instrument Output - Connect to the input of a guitar pedal or amplifier. 3 2 1 5 5. XLR DI Output - Balanced XLR output for connection to a mixing desk, audio interface, powered speaker, or similar with DI level. 4 6. Channel Selector - With the G10T transmitter docked in the receiver, set to AUTO for automatic channel selection. Or, with G10T transmitter docked in the receiver, set to a channel number to select a fixed channel.
To store and transport the Relay G10S system - Pull the G10T transmitter out to the first click so that it is powered off and the battery cannot discharge. Right-angled 1/4" Adapter - The included Relay G10 transmitter adapter can be used to place the transmitter at a right angle into the guitar, if such placement is desired. It also provides improved compatibility with active guitars that have non-standard jack wiring. Please see line6.com/support/g10adapter for more information.
© 2018 Yamaha Guitar Group, Inc. All rights reserved. Line 6, the Line 6 logo, and Relay are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.