® POD HD400 ® Pilot’s Handbook Manuel de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto 取扱説明書 Go to www.line6.com/manuals and download the Advanced User Guide 40-00-0242 Advanced Users Guide available @ www.line6.
Important Safety Instructions C AU T IO N RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules.
You should read these Important Safety Instructions. Keep these instructions in a safe place • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Welcome to POD HD400 Thank you for inviting POD HD400 home with you! Our engineers have worked long and hard to bring you the new POD HD series of multi-effects processors. Featuring brand new HD Amp modeling, POD HD400 also features effects taken from our industry standard M series of products - M5, M9 & M13.
1. Amp Models - Spin this knob to select one of the Amp Models. The LED will show red or green giving you two model types in each model category. All the guitar tone and FX controls will automatically be set to sound great with that Amp Model, so you can just play! When you turn this knob the Display will briefly show the currently loaded Amp Model name, along with the current settings of the Drive, Bass, Mid, Treble, Ch Vol and Reverb knobs.
10. 4 Way Nav Disc - Used to move through options on certain pages in your Main Display. Press the left or right side of the 4 Way Nav when is displayed next to an item to change settings. Press up and down when is displayed next to an item. • Press the on the 4-Way Nav to see Routing. Turn the Presets knob to select Post. (You’ve just put the Pitch Glide effect Post amp modeling.) 11. Presets Knob - Turn this knob to scroll through all of the stored presets.
12. Save - You can save your custom sounds or modifications by overwriting any of the existing presets. Press the Save button, your display will Looper Mode (Red LED): PRE/ POST appear similar to this: PLAY ONCE PLAY/ STOP Equips your POD HD400 with 24 seconds of looping capability. The PRE/POST footswitch allows you to set your loop recording and playback either before amp and effects modeling or after (LED off=PRE, LED on=POST).
Rear Connections PEDAL 2 GUITAR IN L/MONO CD/MP3 INPUT MASTER VOLUME UNBALANCED OUTPUT LINE RIGHT BALANCED OUTPUT OUTPUT MODE LIVE AMP STUDIO DUAL UNBAL=LIVE / BAL=STUDIO GND LEFT PHONES LIFT RIGHT twice to prevent an accidental disconnect. 2. Power - Connect your Line 6 Power Supply here to power the unit. Unplug to turn it off 3. Guitar In - Plug your guitar cable in here. 4.
13. L6 LINK – is a powerful, proprietary connection developed by Line 6 to enable easy, reliable, one-cable connectivity between various Line 6 products. In the case of the DT50 Series guitar amplifiers and POD HD (300/400/500) series multi-effects processors, this connection allows both products to sync and communicate uniquely with each other.