® POD HD300 ® Pilot’s Handbook Manuel de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto 取扱説明書 Go to www.line6.com/manuals and download the Advanced User Guide 40-00-0241 Advanced Users Guide available @ www.line6.
Important Safety Instructions C AU T IO N RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules.
You should read these Important Safety Instructions. Keep these instructions in a safe place • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Welcome POD HD300 to When you’re ready to get deeper, we recommend you get the Advanced User Guide & Model Gallery for POD HD300 by visiting us online at www. line6.com/manuals. And while you are online, be sure and download the free POD HD300 Edit software application from our Downloads page. If you don't have Line 6 Monkey installed be sure to download that to keep your POD HD300 updated with the latest firmware. Basic operations are covered here in this user manual, so let’s get started.
1. Amp Models - Spin this knob to select one of the Amp Models. The LED will show red or green giving you two model types in each model category. All the guitar tone and FX controls will automatically be set to sound great with that Amp Model, so you can just play! When you turn this knob the Display will briefly show the currently loaded Amp Model name, along with the current settings of the Drive, Bass, Mid, Treble, Ch Vol and Reverb knobs.
10. 4 Way Nav Disc - Used to move through options on certain pages in your Main Display. Press the left or right side of the 4 Way Nav when is displayed next to an item to change settings. Press up and down when is displayed next to an item. • Press the on the 4-Way Nav to see Routing. Turn the Presets knob to select Post. (You’ve just put the Pitch Glide effect Post amp modeling.) 11. Presets Knob - Turn this knob to scroll through all of the stored presets.
12. Save - You can save your custom sounds or modifications by overwriting any of the existing presets. Press the Save button, your display will Looper Mode (Red LED): PRE/ POST appear similar to this: REC/ OVERDUB PLAY ONCE PLAY/ STOP Equips your POD HD300 with 24 seconds of looping capability. The PRE/POST footswitch allows you to set your loop recording and playback either before amp and effects modeling or after (LED off=PRE, LED on=POST).
Rear Connections 1. Cable Retainer - Insert your power supply cable through this once or twice to prevent an accidental disconnect. 2. Power - Connect your Line 6 Power Supply here to power the unit. Unplug to turn it off 3. Guitar In - Plug your guitar cable in here. 4. CD/MP3 Input - Connect a CD player, MP3 player, drum machine or other device here, and you’ll hear it through the Phones, Unbalanced Output and Balanced Output.
• Edit a preset on a POD HD by simply turning knobs on the DT50 as one would any other guitar amp, then save it on the POD HD to perfectly recall every time the preset is selected. • This one is crazy cool! Calling up a particular amp model or preset on the POD HD enables the DT50 to dynamically reconfigure itself in the analog realm to optimize its components to match the source amplifier.