LDAC-Pro Digital / Analogue Audio Converter with Asynchronous USB User Guide English LINDY No. 70410 www.lindy.
LDAC-Pro User Guide Introduction Thank you for purchasing the LINDY LDAC-Pro. The LDAC-Pro is an incredibly powerful tool for both home enthusiasts and audio professionals, featuring multiple analogue and digital audio connections with bidirectional conversion and up scaling to cater for the most demanding applications. Incorporating multiple analogue and digital audio connections with bi-directional conversion and upscaling, this professional DAC can cater for the most demanding applications.
LDAC-Pro User Guide Specification Input ports: o Digital: USB 2.0, HDMI v1.4, TOSLink Optical & SPDIF Coaxial o Analogue: Phono L/R & Front-In 3.5mm Stereo Supported Digital Input Frequencies: 16 bit and 24 bit, 44.1/48/88.2/96/176.4/192KHz Output ports: o Digital: HDMI v1.4, TOSLink Optical & SPDIF Coaxial o Analogue: XLR L/R, Phono L/R & 6.
LDAC-Pro User Guide Overview Front Panel 4 1 2 5 3 1. 6.3mm Stereo Headphone Socket Connect headphones with a 6.3mm jack (or 3.5mm using an adapter) 2. 3.5mm Stereo Front In Analogue 3.5mm stereo input 3. IR Eye IR interface 4. OLED Display Displays input selection, volume setting and input & output sampling rate 5. Menu & Volume Dial Change settings and adjust the menu Rear Panel 5 1 2 4 8 3 7 9 10 6 1. Power Input Connect the supplied 5V 3.
LDAC-Pro User Guide Installation Note: Before beginning the installation, please ensure that all source and receiver equipment is powered off. Do not connect the power supply until instructed to do so. AV Connections 1. Connect your source equipment to the relevant input ports of the LDAC-Pro using good quality cables 2. With more good quality cables connect the LDAC-Pro output ports to your amplifier, receiver, mixer or headphones 3. Connect the power supply to the LDAC-Pro and switch it on 4.
LDAC-Pro User Guide Operation OLED Display The LDAC-Pro features an OLED display, which allows key information to be clearly viewed from a wide range of angles. Below is an example of the information provided on the display. Input Source Headphone Volume Input Sample Rate Output Sample Rate Menu To enter the menu system press the volume/menu controller dial in, you can then navigate through the menus below and make selections by turning the dial and pressing the dial to confirm.
CE / FCC Statement CE Certification This equipment complies with the requirements relating to Electromagnetic Compatibility Standards EN55022/EN55024 and the further standards cited therein. It must be used with shielded cables only. It has been manufactured under the scope of RoHS compliance. CE Konformitätserklärung Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU für IT-Equipment und darf nur zusammen mit abgeschirmten Kabeln verwendet werden.
Recycling Information WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products Europe, United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.