HDMI 8x8 Matrix Switch 1.3c Manual English LINDY No. 38047 www.lindy.
1. Introduction Thank you for purchasing the LINDY HDMI 8x8 Matrix Switch 1.3c with remote control and RS232/USB support. This high performance switch offers you the maximum convenience in HDMI signal distribution when you have multiple HDMI sources and displays to connect together. Each of the eight HDMI inputs can be directed to any of the eight HDMI outputs, so your displays can show up to eight different sources at the same time.
Rear Panel 6 2 1. 2. 3. 4. 5. 6. 7. 6 5 7 5 4 1 3 AC power input: 100-240V RS-232 Communication port USB control port Main dip switches HDMI dip switches HDMI input ports HDMI output ports 4. Remote Control 1. 2. 3. 4. 1 Power: Turn the unit on/off Source select: Only buttons 1 & 2 are used in this area.
1. 2. 3. 4. If your HDTV displays video but no audio, set the audio mode to stereo The factory default setting is both pins to off, this sets 1080p for video and surround sound audio For any other video/audio problems, turn Pin1 to “off” and Pin2 to “on”. This will force the video signal to 720p and the audio signal to stereo Bypass mode will maintain the original output format of video and audio. Setting this mode may give you compatibility issues with the many different kinds of sources and screens.
2 1 3 4 5 6 HDMI Input mapping area HDMI Output mapping area Status indicator 1. Scan: Press the “scan” button, select “scan”, then select the detected port and click OK 2. Setting: Press the “setting” button then press the “get” button to read back the device ID.
3. Linkage: Press the “linkage” button to read back all the status ID’s 4. Open/Close: Press either the “open” or “close” button to open or close the COM port 5. Mapping: Select All Output: Click on “Select All Output” then select the source on the main menu. This quickly sets all the outputs to the same source. Unselect All Output: This releases all the outputs Select Input 1~8 Output: Select the input source, then select the output port icon.
CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN55022/EN55024 class B for IEC/EN61000-4-2/3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
