Manual English LINDY No. 70406, 70407, 70408 & 70409 www.lindy.
User Manual 70408 - Digital to Analogue Audio Convertor Introduction Thank you for purchasing the LINDY Digital to analogue audio convertor. This convertor allows you to input digital audio through a coaxial or optical port and output analogue audio through left and right phono ports.
User Manual 70409 - Analogue to Digital Audio Convertor Introduction Thank you for purchasing the LINDY analogue to digital audio convertor. This convertor allows you to input analogue audio through left and right phono ports and output digital audio through Coaxial/optical ports. A switch on the side of the unit determines which digital input is active. The output digital audio signal is a 2-channel uncompressed LPCM (Linear Pulse Code Modulation) with a sampling rate at 48 KHz.
User Manual 70406 – 2 Port Optical Audio Switch Introduction Thank you for purchasing the LINDY 2 port audio switch. This audio switch allows you to have two digital optical fibre inputs and one digital optical fibre output. Each connected fibre cable can run up to 5m while still providing a reliable and lossless audio transmission.
User Manual 70407 – 2 Port Optical Audio Splitter Introduction Thank you for purchasing the LINDY 2 port audio splitter. This audio splitter allows you to have one optical fibre audio inputs and distribute it to two optical fibre audio outputs. Each connected fibre cable can run up to 5m while still providing a reliable and lossless audio transmission.
CE/FCC/Recycling Information CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN55022/EN55024 class B for IEC/EN61000-4-2/3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
