DIJON LS60I2F www.linarie.com.
Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under Linärie’s manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual.
1. GENERAL INFORMATION 1.1 Appliance Information A damaged appliance can be dangerous. If you find the appliance is damaged or marked, you must report it within 7 days if you wish to claim for damage/marks under the manufacturer’s warranty. This does not affect your statutory rights. Do not use a damaged appliance. Faulty components must only be replaced by genuine Linärie spare parts. The manufacturer can only guarantee the safety of the appliance when Linärie replacement parts are used.
2.3 Correct Use & Operation For safety reasons, this appliance may only be used after it has been built in. Reliable and safe operation of this appliance can only be assured if it has been connected to the mains electricity supply.
cont. product introduction 3.4 Working Theory/ Advantage of Induction cooktop Induction cooking is safe, advance, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. The glass become hot only because the pan eventually warms it up. Energy-saving. Iron pot Magnetic circuit Ceramic glass plate Induction coil Induction currrents 4. INSTALLATION 4.
cont. installation The adhesive that join the plastic or wooden material of the furniture, MUST be heat resistant of not below 150ºC. The rear wall, adjacent and surrounding surfaces must be able to withstand a temperature of 90°C. 4.2 Before Installation Be sure the work surface is square and level, and no obstruction with space requirements. The work surface is made of heat – resistant and insulated material. If the cooktop is installed above an oven, the oven must have a cooling fan.
cont. installation 4.7 Connecting the cooktop to the mains power supply > Suitable Only (for the model without plug). The appliance must be connected to the mains by a qualified professional, who is familiar with and adheres to the local requirements and supplementary regulations of your electricity supplier. 1. Your household power supply must meet the power consumption of the appliance. 2. The voltage and power cord must meet the values on the technical data sheet. 3.
cont. operation 5.3 How to use your induction cooktop 5.3.1 Start cooking (please check control panel on page 3) While on the standby mode, touch the main power “ ”key, the induction cooktop will make a “beeping sound” once indicating that it is ready to use. If only the indicator light above the “ ” key is lit up, the cooking zone key is ON, or Locked key are not chosen within 30 seconds, the unit will automatically return to standby mode. Place a suitable pan on the cooking zone that you wish to use.
cont. operation 5.3.5 Timer control You can use the timer in two different ways: With the desired heating zone Powered ON and flashing, press the “Time” key. The timer display will flash and show a ”00” or “30”, Press the “+” or “-” to increase or decrease to the desired time. Choose up to 99 minutes. Once the timer is set, timer starts if no other key is touch after 3 to 5 seconds, the timer display will flash and remain active for that particular cooking zone.
6. COOKING GUIDELINES Take care when frying as oils and fats heat up very quickly, particularly if you are using PowerBoost. At extremely high temperatures oils and fats will ignite spontaneously and this presents a serious risk. 6.1 Cooking Tips Reduce the temperature when food is cooked or heated. Using a lid will reduce cooking times and save energy by retaining the heat. Minimize the amount of liquid or fat to reduce cooking times.
8. CARE AND CLEANING Situation Everyday soiling on the glass. (fingerprints, marks stains left by food or non sugary spillovers on the glass) What to do Remarks When the power is switch off, there will be no “hot surface” indication but the cooking zone may still be hot! Take extreme care. Always read the label to check if your cleaner is suitable. 1. Switch the power of the cooktop OFF. 2. Apply a cooktop cleaner while the glass is still warm not hot. 3.
cont. troubleshooting The induction cooktop is equipped with a self-diagnostic function. With this test the technician is able to check the function of several components without disassembling or dismounting the cooktop from the working surface. 1. Failure code that occur when customer is using and Solution; ERROR Plug in, No “BI” heard *U CHECK POINTS - Is there blackouts? - Check for damaged fuse and socket. - Check if cooking vessel suits for the cooker. - Check if the pot is centered.
10. ENVIRONMENTAL TIPS Observe all safety and warning information during operation (see the “General Safety Instructions” section). 10.1 Disposal considerations 10.2 Disposing of your old appliance The transport and protective packaging has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Electrical devices marked with this label may not be disposed of in domestic waste at the end of their service life.
LIKE TO KNOW MORE? For further information on all Linärie appliances, or to obtain detailed dimension and installation information, phone or email our Customer Care team or visit our website: Australia hello@linarie.com.au www.linarie.com.au Follow Us @Linarie.Appliances © Linärie www.linarie.com.
Operating and installation instructions: Original √ Translation Mart Online Services Pty Ltd. ACN 657 824 050 Linärie Contact hello@linarie.com.au www.linarie.com.au The distribution and duplication of this document, as well as the use and disclosure of its contents are prohibited unless expressly authorised. These operating and installation instructions have been drawn up with the greatest of care.
