Pairing Bluetooth devices Direct pairing Direct pairing is used for pairing a LINAK control directly to a LINAK control box that supports BLE. 1. Enter pairing mode 2. Move the hand control closer to the control box you want to pair with 3.
Connecting to the control box When the hand control LED is blinking fast and the control box gives a high frequency sound in the same speed, the devices are ready for pairing. To finalise the pairing, press Key 1 on the hand control. 2 3 0 1 4 5 6 7 8 9 Press key 1 to connect the hand control to the control box Adjust your application with a LINAK wireless control Recommendations • Do not submerge the hand control in water.
18. HD80 (MEDLINE® CARELINE®) The HD80 makes it possible to have two hand controls in one unit. The hand control is equipped with a magnet locking function, making it possible to have two levels of operation – one for the patient and relatives and one for the caregiver staff. The HD80 provides a great overview using LED indication of functions being locked or unlocked. The hand control is designed to work with OpenBus™ systems.
19. HD80 JUMBO (MEDLINE® CARELINE®) The HD80 JUMBO is a hand control with an optimised ergonomic design and functions that are activated via dome buttons. Usage: • Usage temperature: • Storage temperature: • Compatibility: • Relative humidity: • Atmospheric pressure: • Height above sea level: • Flammability rating: • Approvals: 5º C to 40º C -10º C to +50º C Only compatible with CBJ Care 20% to 80% - non-condensing 700 to 1060 hPa (3000 m) Max.
21. HL80 (MEDLINE® CARELINE®) The HL80 hand control has an optimised ergonomic design and switch activations. The HL80 is a lockable hand control, which makes it possible to lock or unlock one or several functions. It is available in several different standard versions with a variation of bed symbols for easy interaction with end-users. Usage: • Approvals: IEC60601-1, ANSI/AAMI ES60601-1 and CAN/CSA-22.
7. Information on specific JUMBOTM 1. BAJ (MEDLINE® CARELINE®) The battery pack BAJ has been specially developed for use with the JUMBO system. They are easy to exchange through an integrated snap system, and can easily be mounted on the mounting brackets. Usage: • BAJ is a part of the JUMBO system. It is compatible with CBJ1/CBJ2, CHJ2, CBJ Care and COBO • Duty cycle: 10 % or 2 min. continuous use then 18 min.
Mounting Do not mount the battery upside down. Please follow the mounting instructions of the control box e.g. CBJ Care or COBO. Standby mode When the BAJL Li-Ion is not being used for a longer period - more than a week - or when it is on stock, it enters into a standby mode to save power and protect the battery from deep discharge. • Please connect the charger for approx. 15 seconds to exit the standby mode before use.
Warnings ALL LI-ION BATTERY USERS MUST READ THESE IMPORTANT BATTERY SAFETY INSTRUCTIONS AND WARNINGS BEFORE USING LI-ION BATTERIES. Failure to read and follow these safety instructions and warnings may result in fire, personal injury, and equipment damage if the batteries are charged and/or used improperly. Lithium ion batteries differ from the lead acid technology as they have a built-in deep discharge protection.
3. CBJ1/CBJ2 (MEDLINE® CARELINE®) The control boxes CBJ1 and CBJ2 are part of the battery driven JUMBO system. JUMBO is a modular system combining an actuator, a control box (CBJ1, CBJ2), a battery (BAJ1) and a charger (CHJ2) in a flexible solution, specially developed for patient lifts. The complete system is medically approved and contains a series of features which meet the patients need for a safe and comfortable lift, e.g.
Current cut-off for CBJ1 CBJ1 CH1 CH1 Up Down Leg spreader CH2 Up Down Min. Max. Max. Min. Min. Max. Max. Min. Min. CBJ1001N 6.3 8.3 5 3.3 * * * * - Max. - CBJ1001H 9 11.5 7 4.7 6.3 8.8 7 4.7 - - CBJ1002N 6.3 8.3 5 3.3 * * * * 2 2.9 CBJ1002H 9 11.5 7 4.7 6.3 8.8 7 4.7 2 2.9 CBJ1004H 5.25 6.3 3.85 2.75 5.2 7.1 5 3.3 4.7 6.2 CBJ1005N 6.3 8.3 5 3.3 * * * * 4.7 6.2 CBJ1005H 9 11.5 7 4.7 6.3 8.8 7 4.7 4.7 6.
Adjustment instructions for the JUMBO application. Tool For the adjustment you must use a trimming screwdriver, which can be purchased from LINAK A/S. It is also possible to use other types of trimming screwdrivers for the adjustment. Ordinary screwdrivers cannot be used, as they will damage the potentiometer slot. When you receive the JUMBO from LINAK A/S it is adjusted to min. current cut-off. 1. Connect the JUMBO control box to the actuator. 2. Load the actuator with the required load. 3.
4. CBJ-Care (MEDLINE® CARELINE®) The control box CBJ Care is part of the JUMBO system. JUMBO is a modular system combining an actuator, control box (CBJ Care), battery (BAJ1, BAJL), wall charger (CHJ2), control box prepared for external charger by use of wall-plug charger CH01, and a hand control in a flexible solution, specially developed for patient lifts. The complete system contains a series of features which meet the patient’s need for a safe and comfortable lift.
Functionality – JUMBO Care with display Below you find information about what to read-out on the display version of JUMBO Care. Basically the functionality for the display version is the same as the diode version, but more information can be read out on the display. Driving information As long as a hand control button function is activated driving information will be shown on the display. Either lifting arm up, lifting arm down, legs in or legs out or tilt of sling.
Overload Channel 1 only: When overload occurs (according to the pre- defined current cut off limit) the overload symbol will be shown on the display. The ‘MAX’ text will blink 3 times and the overload symbol will be shown for 10 seconds in total. Service information read-out Basic service information can be read out on the display. To get the service information on the display please press the lifting arm up button (only ½ second press).
5. CBJ-Home (MEDLINE® CARELINE®) The CBJ-Home is a specially developed solution for patient lifts. The complete system consists of a control box and a battery enclosed in a single elegant module. The system is approved according to medical safety standards and contains a series of features ensuring a safe comfortable lift, e.g. the CBJ-Home is equipped with a soft-start function, electrical emergency lowering, emergency stop etc. Usage: • CBJ Home with internal charger: Nominal current draw max.
6. COBO (MEDLINE® CARELINE®) The COBO is an interface box specially developed for use together with the JUMBO battery pack (BAJ1/BAJ2 and BAJL Li-Ion) and the CU20 control unit. It is also possible to connect other 24V lead acid customer batteries or fixed power supply. Safety: The COBO has a monitoring circuit for the FET transistor. If the FET is damaged the CU20 will go into fatal error mode. In this case the COBO is defective and must be replaced.
Recommendations • Choose CU200XXXXX2XXXX if positioning/memory function is to be used. • It is recommended that the COBO is serviced according to the relevant national norms for the applications in which it is used, however all electrical parts must be checked at least once a year. • The COBO should be cleaned regularly, in order to maintain good hygiene. It is not allowed to use chemicals to clean the box. • Only use COBO together with CU20.
9. MBJ1/2/3 (MEDLINE® CARELINE®) Depending on of what your JUMBO system consists you need to use one of the following three mounting brackets. IP protection is only valid when the JUMBO system is mounted vertically. All three brackets include matching screws (IPX1, IPXX and IPX5 are delivered with stainless screws). The mounting screws for the control box, charger must be tightened with a maximum torque of 1 Nm. MBJ1 For use together with CBJ1 or CBJ2 or CBJC, CHJ2 and BAJ1 or BAJ2. I. e.
8. Information on specific accessories If the actuator is to be equipped with accessories, these must be specified when ordering the actuator from LINAK. There are the following possibilities: 1) TR6/TR7 External transformer If the TR6 or TR7 fixed cable connection becomes damaged the transformer must be replaced. 1. BA16 Lead acid (MEDLINE® CARELINE®) The battery box BA16 is developed for use together with the LINAK CA and CO control box series to support power backup.
Mounting instructions: BA16 must be mounted with M4 screws due to the battery weight. Make sure the surface touching the BA16 mounting surface is flat and use all 4 screws. The diameter of the screw cap must be maximum 8mm. Drawing No.: 0273044-SALES Drawing No.: 0273044-SALES SCALE : 2:1 d1 M4 d2 max 8 k 4 SCALE : 2:1 According to ISO 2009 Cable Cable Mini-fit (4 pole) with angle to Mini-fit (4 pole) straight For cable details see chapter 4.1.
2. BA18 (MEDLINE® CARELINE®) The BA18 is a cost-effective lead acid battery without integrated charger that can be used in combination with CO53 and with the long-established control box range, of which many are now legacy products.
3. BA19 Lead acid (MEDLINE® CARELINE®) The BA19 lead acid backup battery has been developed specifically for use with the new control boxes CA30/CA40 and CO61. It is a compact and cost-efficient battery with built-in charger and cable management.
Recommendations: • • • • • Do not exceed the storage temperature as it will shorten the product life and reduce performance. Allow the battery to settle to room temperature before use. Do not exceed the duty cycle 2/18 as it will shorten the life, reduce performance, and eventually activate overcurrent protection. BA19 is not intended for use in outdoor applications. If the battery is completely discharged, then recharge the battery before storage.
4. BA21 Li-Ion (MEDLINE® CARELINE®) The BA21 Li-Ion back-up battery pack has been specially developed for use with the new control boxes COxx and CAxx, e.g. CO61 and CA40, etc. It is a low weight battery with built-in charger and high performance and safety. Features and Options Weight: 0.
• Disconnect the mains cable to the application at the power outlet. • Release the control box off the application by pressing the tab on the mounting clip. • Open the lid to the control box by releasing the locking clips. • Open the lid to the battery box by releasing the locking clips. • Open the lid for access. • Remove the power cable from the control box by inserting a screwdriver into the locking clip marked.
• If the clips are not engaged fully, the tab will be sticking out as indicated. • Insert the battery connection cable into the battery port in the control box. • Reconnect any actuator cables or hand control cables to the correct ports. • Close the control box lid, ensuring that the locking clips fully engage. • Ensure that it is fully connected. • Reconnect the mains cable to the control box, ensuring that the locking clip engages. • Turn on or reconnect the mains outlet.
Safety feature BA21 Li-Ion contains several mechanisms to protect itself from being damaged due to excessive use. In case of overheating, the device will activate a thermal protection. No power output will be available until the temperature has returned to normal operating range. Overheating may occur by extensive use at high temperature or by exceeding the 1/19 duty cycle. BA21 safety LINAK Li-Ion batteries for medical use are designed and manufactured to be safe through the product life.
5. CS16 (TECHLINE®) The CS16 electronic limit switch is connected between the LINAK® actuator and a non-LINAK power supply, where it cuts out the current to the actuator in end position of if an obstacle is encountered. The PCB contains a variable current limit setting and is available in different versions, depending on the actuator with which it is to be used.
7. Massage Motor Medical (MEDLINE® CARELINE®) The massage motor can be added to all kinds of couches and tables, chairs or beds for treatment and examination. It enables comfort, relaxation and tension release for patients and clients. The massage motors are directly connected to the actuator port at the control box – no extra wiring at the application, simple and easy mounting.
8. MJB2 (MEDLINE® CARELINE®) The MJB2 is a compact 2-port repeater designed for use together with analogue or OpenBus™ control boxes. It is optimised for use in systems where 1 extra port is needed for easy connection of a hand control, a foot switch or an accessory like the UBL. It is easy to integrate in a wide range of healthcare applications such as hospital beds, surgery tables, and treatment chairs.
9. MJB5 Plus Port Repeater (MEDLINE® CARELINE®) The modular junction box MJB5 Plus is designed for use together with OpenBus™ control boxes. The MJB5 Plus makes it possible to connect multiple hand controls and attendant controls. It can even be used for charging or to connect the Under Bed Light and 3rd party products. MJB5 Plus Port Repeater, version 000: The MJB5 Plus version 000 is used where there is a need for more ports than available in the control box.
Unlocking of cable locking mechanism If a cable needs to be replaced or added, we recommend to open the cable locking mechanism as described below and demonstrated in our video on LINAK.com - MJB5 Plus section brochures and manuals. CLICK Video guide available on www.linak.com CLICK 1. Insert a pin or screwdriver with a diameter of 3.5 to 4 mm. 2. Pull downwards until a click sound is heard. Repeat this for the other locking hole. 3. The cable mechanism is now unlocked.
Multi-flexible mounting bracket for MJB5 Plus - article no. 1015W1010-A Drawing no.: 0835012 Mount the bracket on the side or the back of the MJB5 Plus. If it is necessary to dismount the MJB5 Plus from the application, we recommend to use the bracket for mounting. Use special screws type WN1423 K60x16, ordering no. 0002645. The screws must be mounted with a torque of maximum 1,0 Nm. The screw head will then be flush with the bracket.
The bracket is very flexible for mounting but we recommend one of the following fiixations. Bracket fixation to the MJB5 Plus back: Bracket fixation to the MJB5 Plus side: The MJB5 Plus bracket is for mounting on the CO and CB OpenBus control boxes. Mounting examples MJB5 Plus with bracket mounted on the side. MJB5 Plus mounted on the side of the control box. MJB5 Plus with bracket mounted on the back. MJB5 Plus mounted on the side of the control box.
Recommendations: • • • • • • • • • • • • • The MJB must be mounted on an even surface The locking surface must be free of other material Always use locking mechanism and O-ring Sockets not used must be fitted with blind plugs to ensure the IP degree HOT PLUGGING Removing or adding any OpenBus cables are not allowed when the control box is powered by mains supply! If needed anyway follow the below procedure: 1. Remove mains and wait 5 sec. 2.
10. MJB5 Plus SMPS (MEDLINE® CARELINE®) The modular junction box MJB5 Plus is designed for use together with OpenBus™ control boxes. The MJB5 Plus makes it possible to connect multiple hand controls and attendant controls. It can even be used for charging or to connect the Under Bed Light and 3rd party products. MJB5 Plus with Switch Mode Power Supply (SMPS) 5V SMPS, version 502-010. The SMPS is to be used where there is a need for power supply near the bed. For example, to charge electronical devices.
Unlocking of cable locking mechanism If a cable needs to be replaced or added, we recommend to open the cable locking mechanism as described below and demonstrated in our video on LINAK.com - MJB5 Plus section brochures and manuals. CLICK Video guide available on www.linak.com CLICK 1. Insert a pin or screwdriver with a diameter of 3.5 to 4 mm. 2. Pull downwards until a click sound is heard. Repeat this for the other locking hole. 3. The cable mechanism is now unlocked.
