BL1 end plate kit with cable through: Bottom plate dimensions: Top plate dimensions: Motor cable Hand control cable Hand control cable Please notice the thickness of the bottom plate is 12 mm. The thickness of the bottom plate without connections is 10 mm. Bottom plate dimensions: Motor cable Drawing no.: 0801263-A BL1 Mounting guidelines: • BL1 is for use in push applications, and can be mounted in both directions (smallest profile down, or up).
Mounting holes Mounting holes 0.6 0.8 Drain hole Drain hole Mounting holes Mounting holes Drawing no.: 0807000-1 Drawing no.: 0807000-1 Mounting of BL1 with cable through: Mounting holes Mounting holes Drain hole Drain hole Mounting holes Mounting holes Drawing no.
Recommendations • The mounting plate in the application must cover the entire top plate of the BL1 and be strong enough to carry the load. • Remember to secure the cable mounted in the top of the column to the application, so that it cannot be pulled out of the column. We recommend to use LINAK Cable: - Lock kit for BL1 with motor cable: 0808040 - Lock kit for BL1 with hand control cable through: 0808046 Use only the screws included in the kit.
2. LC3 (MEDLINE® CARELINE® ) The LC3 2-stage and 3-stage set the standard for vertical lifting columns to high-end medical applications. This compact lifting column fulfils the market requirements for a solid and stable lifting column. Usage: • Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use • Operation temperature: +5 °C to + 40 °C • Storage temperature: -40 °C to + 70 °C • Compatibility: Compatible with LINAK control boxes. Please contact LINAK.
LC3 mounting guidelines If you want to use the column with a high off-center load, we recommend that you install the weight in one of the 3 ways illustrated by the green symbols. It is not recommended to install the weight on the opposite side of the mechanical endstop as illustrated with the red symbol. This installation can create an uneven movement when the lifting column reaches the endstop position. Mechanical endstop Use 4 pcs. M10 8.8 screws, in each end, for mounting to the application.
Use 4 pcs. M10 8.8 screws, in each end, for mounting to the application. The screw depth must be min. 20 mm and max. 30 mm in aluminum profile. Screw torque: 35 Nm. LC3 2-Stage 15 mm distance to thread 3 mm distance to thread Screw depth min. 20 mm Mounting holes, top Mounting holes, bottom Drawing no.: 1002W9008 Notice that the cable plug must be mounted correctly. The cable slot must fit into the socket.
Cable connections overview 3-stage is used as examples but variants are also applicable for 2-stage. This overview shows all possible cable connections, but please notice that some variants are upon request. Variant Top plate Side entry Drawing no.:1002W9005 Drawing no.
T030 Connections 5: Motor 6: Mains through 1 Female connection top entry, male connection side entry 3: Mains through 1 Female connection top entry, male connection side entry 5: Motor 6: Mains through 2 Male connection top entry, female connection side entry 3: Mains through 2 Male connection top entry, female connection side entry 5: Motor 6: Minifit through 3: Minifit through T040 Connections T101 Connections Page 88 of 264 Including protective grounding cable
T201 Connections 5: Motor 6: HB through 3: HB through 5: Motor 6: Mains through 1 Female connection top entry, male connection side entry 3: Mains through 1 Female connection top entry, Including protective grounding cable male connection side entry 5: Motor 6: Mains through 2 Male connection top entry, female connection side entry 3: Mains through 2 Male connection top entry, female connection side entry Including protective grounding cable T031 Connections T041 Connections Page 89 of 264 Inc
T110 Connections 5: Motor 6: Minifit through (top) 7: Minifit through (top) 3: Minifit through (side) 4: Minifit through (side) 5: Motor 6: HB through 7: Minifit through 3: HB through 4: Minifit through 5: Motor 6: HB through (top) 7: HB through (top) 3: HB through (side) 4: HB through (side) T120 Connections T220 Connections Page 90 of 264
T130 Connections 5: Motor 6: Mains through 1 Female connection top entry, male connection side entry 7: Minifit through 3: Mains through 1 Female connection top entry, male connection side entry 4: Minifit through 5: Motor 6: Mains through 2 Male connection top entry, female connection side entry 7: Minifit through 3: Mains through 2 Male connection top entry, female connection side entry 4: Minifit through 5: Motor 6: Mains through 1 Female connection top entry, male connection side entry 7: HB throu
T240 Connections 5: Motor 6: Mains through 2 Male connection top entry, female connection side entry 7: HB through 3: Mains through 2 Male connection top entry, female connection side entry 4: HB through S300 Connections 3: Motor supply S400 Connections 3: Motor supply Page 92 of 264
S500 Connections 3: Motor supply S301 Connections 3: Motor supply Including protective grounding cable 3: Motor supply Including protective grounding cable S401 Connections Page 93 of 264
S501 Connections 3: Motor supply S310 Connections 6: Minifit through 3: Motor supply 4: Minifit through 6: HB through 3: Motor supply 4: HB through S320 Connections Page 94 of 264 Including protective grounding cable
S410 Connections 6: Minifit through 3: Motor supply 4: Minifit through 6: HB through 3: Motor supply 4: HB through 6: Minifit through 3: Motor supply 4: Minifit through S420 Connections S510 Connections Page 95 of 264
S520 Connections 6: HB through 3: Motor supply 4: HB through 6: Mains through 1 Female connection top entry, male connection side entry 3: Motor supply 4: Mains through 1 Female connection top entry, male connection side entry 6: Mains through 2 Male connection top entry, female connection side entry 3: Motor supply 4: Mains through 2 Male connection top entry, female connection side entry S330 Connections S340 Connections Page 96 of 264