CO61MK2 Data Sheet
CO61 | 2 Contents Introduction �������������������������������������������������������������������������������������������������������������������������������� 3 Features and options ������������������������������������������������������������������������������������������������������������������ 4 Ordering example ����������������������������������������������������������������������������������������������������������������������� 7 CO61MK2 system overview ���������������������������������������������
CO61 | 3 Introduction The LINAK control box CO61MK2 offers a consolidated range of unprecedented features – all utilising standardised technology, interfaces and compatibility. The CO61MK2 for LINAK actuators is intended for the control of, for example, hospital bed movement.
CO61 | Features and options Features Power supply CO61MK2 CB6OBMe Universal, SMPS 200 W SMPS, 270 W, 100-240 V 50/60 Hz or toroidal transformer 270 W, 230 V Input 100-240 VAC, 50/60 Hz Output 24VDC;4.
CO61 | Features CO61MK2 CB6OBMe Charging indicator Supported by using BA21 Supported Acoustic warning signal Internal buzzer Internal Battery alarm Supported by using BA21 Yes, supported (low battery alarm at 19 V) EOP Yes Yes IP-Rating IPX6 Washable DURATM IPX6 Operation True parallel (hall feedback) Semi parallel Max. current 10 A/CH, 2/18 min. Max.
CO61 | Usage CO61MK2 Operating temperature Storage temperature Relative humidity Atmospheric pressure Meters above sea level Approvals +5 °C to +40 °C -10 °C to +50 °C 20% - 80% - non-condensing 700 to 1060 hPa Max. 3000 meters - IEC60601-1 edition 3.1 - ANSI/AAMI ES60601-1:2005/(R) 2012 - CSA CAN/CSA-C22.2 NO.
CO61 | Ordering example C O 6 + 0 9 4 2 1 S 0 9 0 0 0 Reserved for future use Reserved for future use PCP version 0 2 PCP 1.0 (not for new designs) PCP 2.0 (with possibility of SW replacement to PCP 1.0) Class 9 2 Pole (Without earth. Class II) Wireless communication 0 4 None Wireless Gen.
CO61 | CO61 system overview HB30 HB70 HB80 HB100 HB200 HB400 HD80 HL70 FS3 MJB DJB ACO ACC ACK ACT ACOM FPP BA16 BA19 BA21 One signal input CO-Link™ PJ2 (5/6) BA16 BA19 BA21 CO61 Power outputs (1-4 channels) LA20 LA23 LA27 LA29 LA31 LA34 LA40 LA44 BL1 CO41 CO61 CO65 CO71 8
CO61 | LED indicator CO61MK2 is equipped with a green LED for indication of mains power connected. Acoustic signal functionality The buzzer will make a warning, when a button on the hand control is pressed, and the battery state of charge is low. The buzzer can also be activated by the control box to signal other conditions. This must be specified in the control box software.
CO61 | 10 Dimension drawing Drawing No.
CO61 | 11 Mounting brackets For mounting with LA40 (Article No.: 1015W1002) Drawing No.: 1015W4002 For mounting with LA31 (Article No.: 1015W1004) Drawing No.
CO61 | 12 For mounting with LA27 (Article No.
CO61 | 13 Mounting bracket (frame flat) (Article No. 1015W1001) Drawing No.: 1015W4001 Mounting bracket (frame flat) w/M4 nuts (Article No. 1015W9009) Drawing No.
CO61 | 14 Mounted on frame Release hook Very small built-in dimension: Height: min. 80 mm (lid can be removed) Length: + 20 mm (locking system) Service lid Integrated hinge Removable if needed Easy-mount bracket 3-way cable exit Drawing No.: 1013W4008 in a position that allows water water to escape It is recommended to mount the CO61MK2 in a position that allows to escape. Recommended torque: 0.6Nm +/-0.
CO61 | 15 Mounting of cables and cable lock CO61 has a uniquely designed cable lid. The lid also works as an integrated cable lock when closed. 1) Mount cable plugs in control box 2) Close lid until lock snaps into place (see arrows) To allow free access to the cables, the lid has a rest position when completely opened. It is possible to remove the lid by lifting it a few degrees and pulling it away from the housing under tight mounting conditions.
CO61 | 16 CO-Link Up to 8 channels and 2x200 W (or combinations of all CO-control boxes) CO61MK2 A CO-Link software makes it possible to link two CO61 control control control boxes boxes (or boxes (or combinations combinations (or combinations of of allallof all CO-control boxes) into a system with a primary and secondary control box allowing you to run up to 8 channels with 2x200 W. All CO61 benefits and USPs including: • • • • • • 1 control – 2 x CO61s 8 channels 2 x 200 W Standard items 2 x 2.
FACTORIES DENMARK - HEADQUARTERS LINAK A/S PHONE: +45 73 15 15 15 FAX: +45 74 45 80 48 FAX (SALES): +45 73 15 16 13 WWW.LINAK.COM SUBSIDIARIES Australia LINAK Australia Pty. Ltd Phone: +61 3 8796 9777 Fax: +61 3 8796 9778 E-mail: sales@linak.com.au www.linak.com.au Malaysia LINAK Actuators Sdn. Bhd. Phone: +60 4 210 6500 Fax: +60 4 226 8901 E-mail: info@linak-asia.com www.linak.