linear motion systems Cinema Seat Mass Open/Close Receiver Box Master MC251 Product Specification
Mass Open/Close system Receiver 2017/02/2 5 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.
Mass Open/Close system Receiver 2017/02/2 5 Description This system is designed for cinema seats mass open and close. With one wall unit box could control up all seats open and close at one time. The Master motor controller is a wireless receiver and could execute the command from transmitter and delivery the control signal to slave motor controller.
Mass Open/Close system Receiver 2017/02/2 5 Label: Operation Instruction: Before all operation, please connect transmitter box to DC power, plug the receiver box MC250 to L1 actuator , and turn the key lock to position “On”. The display will show information if power on and initialization correct. Pairing 1. Transmitter box: Presse Open/Close/Enable at the same time, the display will show: “Enter the paring mode”, and counter for 3 s to enter. Press any key will exit paring mode 2.
Mass Open/Close system Receiver 2017/02/2 5 3. Master controller box unit Single Operation: Press handset button S1 to let seat open Press handset button S2 to let seat open Remark: If turning the key switch 2.5 times within 1 seconds, the operation will be disabled for 5 s, and the working LED indicator will be flashing to prevent user playing with the system.
Mass Open/Close system 2017/02/2 5 Receiver Revised history Item 1 2 Change content First issue Update drawing GL-TE-017(01) Index 00 01 6 Revised date 2017/2/19 2017/02/25
Mass Open/Close system Receiver 2017/02/2 5