User's Manual

LigoDLB Propeller 5

LigoDLB Propeller 2

installation

PoE power

adapter

Power cord

Insert brancket

Package content Assembling Mounting

Operating modes

Power cord is region dependent

LAN + PoE

Data In

Wall/pole mount

x2 plastic clamps

x4 screws and

plastic inserts

LAN + PoE

Reset

Power LED

LAN LED

RSSI LEDs

Wall mounting

Pole mounting

PoE connection

CPE mode AP mode

Azimuth beamwidth

PAGE 1
Package content Assembling LigoDLB Propeller 2 LigoDLB Propeller 5 Mounting Operating modes RSSI LEDs installation Azimuth beamwidth Azimuth beamwidth 15o 60o LAN LED Power LED Reset LAN + PoE CPE mode x4 screws and plastic inserts x2 plastic clamps AP mode PoE connection Insert brancket Power cord is region dependent Wall mounting Power cord PoE power adapter Wall/pole mount Data In Pole mounting LAN + PoE
PAGE 2
Default login settings IP address: DHCP client (fallback IP 192.168.2.66) Login: Login: admin Pass: admin01 Important information Copyright © 2015 LigoWave This guide and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of LigoWave.