Classroom Audio System 1 POWER 2 User Manual
TABLE OF CONTENTS SECTION 1: Overview SECTION 2: Set-up & Use 4 5 6 7 7 8 8 9 10 10 11 13 14 15 16 17 18 Important Safety Instructions System Components and Unpacking Optional Components Front Panel Indicators Top Panel Controls and Connections Side Panel Controls and Connections Rear Panel Features Flexmike Controls and Connections Step 1. Determine Set-up Location 1A. To Set-Up on Table Top 1B. To Set-Up Mounted on a Wall Step 2. Connecting the Power Supply Step 3. Audio Integration Step 4.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
OVERVIEW SYSTEM COMPONENTS AND UNPACKING The standard configuration of the Redcat Access will contain: POWER 2 1 2 Flexmike Classroom Microphone 1. Overview Redcat Access Receiver/ Amplifier and Power Supply 2. Set Up & Use / Daily Operation 3. Optional Accessories 1 4. Maintenance & Troubleshooting 5. Warranty, Safety & Specifications SECTION 1: Wall Charger & Charging Cable PLEASE NOTE: The Redcat Access and Microphone(s) are registered together at the factory and are labeled as such.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting Optional Accessories FCAD-4 SM Flexcat for small group instruction* Handheld microphone with battery pack 16V-2.0-_ FM NH2.4V NH2APK AA NiMH rechargeable battery pack for Sharemike, one per Sharemike Charging cable for Sharemike USBDC-5 1. Overview 4 3. Optional Accessories FL USB2-NA USB2-INT USB-MCB Redcat Access all-in-one system 16V/2.0A power supply for Redcat Access, U.S. and Canada 16V/2.
5. Warranty, Safety & Specifications FRONT PANEL INDICATORS 1. POWER ON INDICATOR: The power light will glow blue when power is applied. 4. Maintenance & Troubleshooting 2. MIC 1 & MIC 2: Mic link and registration indicators a. Flashing amber indicates registration is in process. b. Solid green indicates a link has been established. 2 2 POWER 2 2. Set Up & Use / Daily Operation 1 3. Optional Accessories 1 1. Overview TOP PANEL CONTROLS 1.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 2. Set Up & Use / Daily Operation 1. Overview SIDE PANEL CONTROLS AND CONNECTIONS 1. REGISTRATION: Press this button if there is a new component, such as a microphone, to be registered. 1 REGISTER 2. AUDIO INPUT JACK & VOLUME CONTROL: 3.5mm stereo connector for connecting classroom audio sources to the Redcat Access. Controls the volume level of the audio input from the connected audio source.
8 6 7 9 10 1. POWER/MUTE SWITCH: press and hold to power on, press to mute, press and hold to power off. 2. MIC 1 STATUS: lighted to indicate microphone is registered as MIC 1 • Blue: solid = normal operation; Blue: flashing = linking in process • Red: solid = muted; Red: flashing = muted while linking in process 3. MIC 2 STATUS: when using a second microphone, this LED is lighted to indicate microphone is registered as MIC 2 (same behavior as MIC 1 status light above) 4.
5. Warranty, Safety & Specifications SECTION 2: SET-UP & USE 1. Overview 2. Set Up & Use / Daily Operation 3. Optional Accessories 4. Maintenance & Troubleshooting 1. DETERMINE SET-UP LOCATION The Redcat Access is shipped with feet to stand on a cabinet or tabletop. Alternatively, the feet can be used as wall mount brackets.
Next, find a location as far away as possible from the teacher who will be using the mic. The best place is centered on the long wall opposite Good placement 1. Overview 2. Set Up & Use / Daily Operation Best placement 5. Warranty, Safety & Specifications the teacher. If this is not possible, other good locations are on the wall next to the teacher. Avoid placing the Redcat Access on any wall close to where the teacher usually stands to instruct the class.
5. Warranty, Safety & Specifications 1B. TO SET-UP MOUNTED ON A WALL CONT’D 1. Level template and tape to wall 2. Mark position of drill holes on wall 3. Optional Accessories 4. Maintenance & Troubleshooting 3. Drill pilot holes 4. Insert anchors 5. Remove feet from Redcat Access and place over anchors 6. Insert and secure screws through the Redcat Access feet into the anchors 7. If using optional security bracket, mount on wall using the provided screws and anchors 8.
3. Optional Accessories 4. Maintenance & Troubleshooting 1. Locate the power supply and AC power cord. Connect the AC power cord into the DC power supply. 5. Warranty, Safety & Specifications 2. CONNECTING THE POWER SUPPLY REGISTER AUDIO IN MIN MAX AUDIO (ALD) OUT MIN ON/OFF Power On 1. Overview DC INPUT 16V/2.0A 2. Set Up & Use / Daily Operation MAX 2. Insert the DC connector into the “DC INPUT” connector on the Redcat Access and plug the other end to an electrical outlet. 3.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 3. AUDIO INTEGRATION The next step in setting up your Redcat Access system is to connect it to the other elements of your audio system. Audio systems have varying elements – you may have a computer, television, DVD/VCR player, a visual projection system or other devices.
1. Plug wall charger into an electrical outlet. 2. Plug the USB charging cable(s) into the wall charger. 3. Plug the micro USB end of the charging cable into USB port on the bottom of the Flexmike. 4. When the Flexmike is fully charged, the light on the mic will change to green. 1 2 5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting Replacement NiMH battery packs may only be purchased through Lightspeed Technologies (part # NH2.4V). Do not attempt to charge with other battery packs.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 2. Set Up & Use / Daily Operation 5. OPERATING THE FLEXMIKE Once the Flexmike is charged, follow these steps to set it up for use. 1. Remove the Flexmike from the charging cable and put it on by connecting the magnetic clasps behind your neck. The Flexmike will automatically power on and mute when it is removed from the charger. This will automatically power on the Redcat Access as well. 2.
2. Set Up & Use / Daily Operation 3. Connect a patch cable from the ALD’s microphone jack or AUX input to the 3.5mm audio jack labeled “ALD OUT” on the side 5. It may be necessary to adjust the volume on the Personal FM receiver to achieve appropriate volume level. 4. Maintenance & Troubleshooting 2. Determine the size and type of audio input jack on the device as many manufacturers’ products differ in connector size and shape. The Lightspeed 370 Transmitter requires a 3.5mm to 3.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting The Flexmike includes a 3.5mm audio input jack to connect to an audio source like a laptop or MP3 player. The Flexmike will transmit the audio signal to be played through the system. If your system includes two Flexmikes, you can use one mic for instruction and the second mic to transmit audio through the system. 1. Plug your external audio equipment (for example, laptop), into the input on the Flexmike labeled “INPUT” using a 3.
2. • The microphone will default to the Mute position, the status will turn to red. • Place the microphone around your neck. • Press the power/mute button, the status will turn blue, indicating the microphone is active and ready to use. • Adjust volume with the UP/DOWN buttons if necessary. • If Flexmike needs to be powered down for some time, press and hold the power button. To power Flexmike again, press and hold the power button until the blue light begins to blink. Private conversations.
5. Warranty, Safety & Specifications OPTIONAL ACCESSORIES Sharemike: Controls and Connections 3. Optional Accessories 4. Maintenance & Troubleshooting SECTION 3: 3 2 2. Set Up & Use / Daily Operation 1 4 1. Overview 5 1. POWER BUTTON 2. MIC 1 or MIC 2 STATUS: lighted to indicate microphone is registered • Blue: solid = normal operation; Blue: flashing = linking in process • Red: solid = muted; Red: flashing = low battery 3.
3. The light on the microphone will glow red to indicate charging. 4. Leave the Sharemike plugged in overnight (8-10 hours) to obtain a full charge. The light will turn green when charging is complete. 1. Overview 2. Set Up & Use / Daily Operation 3. Optional Accessories 2. Plug the other end into the charging jack into the wall charger. 5. Warranty, Safety & Specifications 1. Make sure the cradle charger is plugged into a wall outlet.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 2. Set Up & Use / Daily Operation 1. Overview 22 Sharemike: Initial Set-up 1. Ensure the Redcat Access is on. The blue light on the front of the RCA will glow. 2. Turn on the Sharemike by sliding the pressing the power switch. 3. Grip the barrel in the center section. 4. While speaking in a normal voice, increase the VOLUME on the Redcat Access level until your voice is barely audible.
4. Maintenance & Troubleshooting MAINTENANCE & TROUBLESHOOTING BATTERY REPLACEMENT 2. Carefully pull the battery pack away from the Flexmike and disconnect the cable. 3. Connect the cable of the new battery pack as shown and insert the battery pack into the compartment. 1. Overview 2. Set Up & Use / Daily Operation Slide the battery door open. 3. Optional Accessories Replacement of battery pack in Flexmike. 1. 5. Warranty, Safety & Specifications SECTION 4: 4.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting Replacement of battery pack in Sharemike. 1. Slide the battery door open. 2. Carefully remove the battery pack from the Sharemike. 3. Insert the new battery pack into the compartment. Ensure proper polarity is observed. 4. Slide the cover back on and snap into place. 5. Connect the Sharemike to a charging cable and plug into the wall charger to charge the battery pack. 1. Overview 2. Set Up & Use / Daily Operation 3.
5. Warranty, Safety & Specifications TROUBLESHOOTING SOLUTION: Battery Check PROBLEM: Low Volume or Feedback • Confirm batteries are charged each night. A blinking red light on the power button indicates a low battery. SOLUTION: Follow these steps to eliminate low volume or feedback. • Confirm proper batteries are used. The Flexmike requires the Lightspeed NH2.4V rechargeable battery pack. The Sharemike requires the Lightspeed NH2APK rechargeable pattery pack. • Check volume level on the amplifier.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 2. Set Up & Use / Daily Operation 1. Overview 26 TIPS TO OBTAIN OPTIMUM AUDIO PERFORMANCE • Speak in a natural voice. A normal conversational speech level will provide an adequate signal. It is not necessary to increase the intensity of your voice—the audio system provides adequate amplification (approximately 5 – 10 dB) above ambient room noises.
Lightspeed Classroom Audio Access Systems are guaranteed against malfunction due to defects in materials and workmanship for a period of FIVE (5) YEARS, beginning at the date of the purchase invoice. If such malfunction occurs, the product will be repaired or replaced (at Lightspeed’s option) without charge during the warranty period. Lightspeed’s Warranty Exchange Program applies to all classroom audio systems within the five (5) year warranty period.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 2. Set Up & Use / Daily Operation SAFETY WARNINGS AND CERTIFICATIONS ! The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert the user to the presence of non insulated “hazardous voltage” within the product’s enclosure, which may be of sufficient magnitude to induce a risk of electric shock to persons.
5. Warranty, Safety & Specifications PRÉCAUTIONS DE SÉCURITÉ ET CERTIFICATIONS L’éclair flèche dans un triangle équilatéral avertit l’utilisateur de la présence d’une “tension dangereuse” non isolée a l’interieur de l’appareil, qui peut être d’une ampleur suffisante pour constituir un risque d’électrocution.
5. Warranty, Safety & Specifications FCC Notice to user This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. 4. Maintenance & Troubleshooting This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
5. Warranty, Safety & Specifications 4. Maintenance & Troubleshooting 3. Optional Accessories 2. Set Up & Use / Daily Operation 1. Overview SYSTEM SPECIFICATIONS REDCAT ACCESS SPEAKER Power output: 20W Acoustic frequency response: 120 Hz - 13 kHz DC power Input: 16V / 2.0A Total harmonic distortion <1% @ 10W Wireless communication: Access Technology (1.9 GHz + RF4CE) Tone control: 1 bass/treble control Audio input: 3.5mm stereo w/ volume control Audio output: 3.
SHAREMIKE Description: Handheld microphone Wireless communication: Access Technology (1.9 GHz) Audio distortion: <1% Integrated microphone: uni-directional electret Audio input: 3.5mm Battery power: 2. AA NiMH battery pack Battery life: 8 hours (fully charged) Charging: 5V charging jack Power: on/off button Registration: push button for registration with Redcat Access 2.25” x 2.25” x 8.75” (57.2 x 57.2 x 222.3mm) 7.36 oz (208.
This page intentionally left blank
LIGHTSPEED TEC H N O L O G I ES 1 1509 SW HERM AN R O A D / TUA L ATIN , O R 9 7 062 T OLL FREE: 800.73 2 .8 9 9 9 / PHO N E : 5 0 3 .6 8 4 .5 5 38 / FAX : 503. 684. 3197 LI GHTS PEED-TEK.