NOTE: THIS DEVICE COMPLIES WITH FCC R RULES PARTS PERPETRATION IS SUBJECT TO THE FOLLOWING DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FUNCTION AND OPERATOR Fr —Ooze Hee ® iO LES-360TH TRANSMITTER mms SEE LESTER RECEIVER TRANSMITTER RECEIVER (1) Battery charge jack (7) Battery charge jack (2) Frequency select switch (8) Frequency select switch (3) Power switch (8) Power switch (5) Power on indicator LED 149) Power on indicator LED = (8) Microphone input jack 42) Earphone Output jack
BATTERY INSTALLATION The transmitter and receiver are both operated by a fresh battery. Before use, Please insert the battery into the compartment of ‘both transmitter and receiver as shown left (figure life with alkaline battery is approximately 6 hours of in-use time. Note: The batteries must be removed immediately in case the will not be used for a long period of time fo avoid battery leakage.
® SPECIFICATIONS TRANSMITTER } Frequency Modulation ) RF Power Power Source Power consumption LED indicator } Dimension |) Weight REC EWER Frequency ; Reception System Reception Sens. Audio output power Power Source Power consumption LED indicator Dimension Weight 216.0125 216.9875 MHZ Frequency Modulation <50 mW BV x1 40mA Power On x 62(W)} x 24(D) mm 130 g (With battery) 216.0125 216.
TRANSMITTER OPERATION 1. Be sure the power switch to OFF position 2. install the battery. Refer to BATTERY INSTALLATION 3. Switch the channel selector switch to desired channel Using the belt clip on the back of the unit to clip the transmitter on the belt or or put it into the pocket 5. Plug the lapel microphone into the microphone input jack 6. Clip on the lapel microphone to your chest level such as in your necktie suit collar etc.. enabling you to get a clear transmission. 7.