User's Guide

ManualsBrandsLight Wave ManualsElectronicsCarlink

Table Of Contents

For more detailed instructions, please consult the HELP section of the CarLink App.

This button will send a START command to your vehicle

remote starter. The vehicles engine will start and run for the

preset time. The timer will begin to count down from the

preset runtime of the remote starter.

This button will send a STOP command to your vehicles

remote starter. The vehicle's engine will shut down and the

runtime status will change to 00:00:00 once the action has

been completed.

This button will LOCK and/or ARM your vehicle. Your

vehicle MUST be equipped with a power door lock system

for this feature to work. The door lock status will change

once this action is completed.

This button will UNLOCK and/or DISARM your vehicle.

Your vehicle MUST be equipped with a power door locking

system for this feature to work. The door unlock status will

change once this action is completed.

This button will allow you to access the AUXILIARY

functions. Some of the functions could be Motorized Lift

Gate, Trunk Release, Power Sliding Doors, Rear Defrost,

ETC. See your retailer for more details.

Displays the current temperature inside your vehicle.

read from the antenna.

DESCRIPTION

COMMAND

Lock & Arm

Unlock & Disarm

Stop

Start

Quick chirp.1 flash of the green LED

2 quick chirps, 2 flashes

of the green LED

CONFIGURATION MODE

Press and hold for 5 seconds until the

2 quick chirps

Press and hold the button for 3 second

until a long chirp is heard and release

Press and hold the button for 3 second

(until a long chirp is heard) and

release. This will send the command to

start the engine

This icon will display the vehicle's battery voltages.

Press and release button 2 times

within 2 seconds. Provides the access

to your vehicle by unlocking the doors

and disarming the factory alarm

Quick

presses

Extended

runtime

Press and release button. Secures

your vehicle by locking the doors

and arming the factory alarm

12.4

Command not received

1 long chirp

Transmit command

Blue LED blinks

1 short beep, 2 quick chirps, 2 flashes

of the green LED

1 long beep, 3 quick chirps, 3 flashes

of the green LED

1 long beep, 2 long chirps then

2 flashes of the green LED

Micro USB battery

charging port

CLCC

User Guide

BT Long Range

Doors

Unlocked

-7

00:00

12.4

Summary of content (2 pages)

PAGE 1
CLCC User Guide BT Long Range This button will send a START command to your vehicle remote starter. The vehicles engine will start and run for the preset time. The timer will begin to count down from the preset runtime of the remote starter. This button will send a STOP command to your vehicles remote starter. The vehicle's engine will shut down and the runtime status will change to 00:00:00 once the action has been completed. - This button will LOCK and/or ARM your vehicle.
PAGE 2
BT Long Range CLCC User Guide Step 1: App & account setup Ÿ Search on App Store or Google Play Store for “Car Link”. Ÿ Download the Car Link smartphone app. Ÿ Once completed, launch the Car Link app on your device. Ÿ Click the "Create an Account", fill in the form and create your account. Ÿ Once done, log into the app using your email address and new secure password. Step 2: Add a system Ÿ Click on the (+) sign in the bottom right corner of the Car Link app screen to add your system to your account.